head

hi just wondering if the head gasket can be changed with the engine still in frame.the bike is a 2003 650.i used to have a ccm which required the engine to be out to do the job.thanks

Brought home my new 2011 570 FS last Saturday and have spent time this past week adding heated grips, fan, and a map switch. Got things back together and now have no head or tail lights. Map switch and fan plugged into the factory provided plugs, heated grips hot wire tapped into an unused...

do any of you guys know where I can get a thicker head gasket or have some made for a 01 470 x My head was worped and I dont want to have the cam chain fly off or wear a hole in my cases, I thought one of the guys in the UK would have had a need for one. I want to surface my head about 5...

Hi! Is this normal? ( is it supposed to be like that) : There were allso pretty much stuff on the oilplug magnet but transmission gears looked fine.

I just picked up a 05 fe 550e with 48 hrs on it,all scheduled maintenance done to it,was lightly trail ridden,I've had it out twice and put 75 race miles on it,I noticed oil seaping out of the hose on the top of the head ,next to the front valve cover,the hose clamp is saturated,has anyone...

My bike needs a new cylinder head and I am in search for a cylinder head, I would prefer info on where I can get new, but will consider good condition used ones. My bike is a 2000 FC501. Any suggestions are always welcome

So i was riding down the hwy the other day on my 2004 fs 450 and blew up my head gasket just riding normal. Im good with engines, just havent really experimented with Husaberg engines. I was wondering how hard it would be, so i can save $400 from a mechanic doing it. Thanks

i am about to replace a blown head gasket with a valley force copper gaskett can someone tel me head torque preasurer and do you require a soft link for the timeing chain any info thanks negy

2005 FS650E 4700km's Less then 100 hours The other day I noticed the Horn doesnt work before that the Hi-Beam indicator stopped working after a trackday I believe the Vibrations killed the bulb...I dont really care so much about the horn I believe its probably a fuse (if that makes cent) But...

Can any one help had head gasket go on 650fse checked head seams ok fitted new gasket took her out and went again did not get far at all thanks

timeline.... 0844 Recieved a text from Robbo, " Good day for it ". Wheeled outta bed stepped outside, cool overcast conditions, threatening to shower. Cool ! Shower and coffee. 0910 Robbo arrives, gear up then down the main drag for a parade lap. Fill up at BP servo on the way out to mossman...

has anyone had trouble with this happening as it has just happened to my bike with 15 hrs on it,i believe there was a recall and it could be a warranty issue,if you have and 09 and not had the mod done take it to your dealer to get it sorted before it cracks on the top engine mount bolt.

yep! tis true.. A husaberg 501/600 headgasket are it appears identical, therefore the heads seem interchangable. the waterpump housing is far bigger. for the 2001-2008 engines they made the cam chain tunnel back out the engine about 20mm where the CCT housing is (and up). the husaberg...

Guys, I've just replaced the head gasket on my bike and wanted to know if I need to retorque the head bolts after running? Final head bolt torque was 55nm splitting the differance between the manuals 50nm and Taffy's 60nm.... Are these monotorque gaskets or do I need to retorque after running...

hi there i havent been on for a while but ive still been reading and learning which brings me round to my next problem lol. if you look in...

anyone else experience really bad head shake on their berg motards? it's usually around top of 5th and all through 6th gear. i've owned a few supermoto bikes, and ridden a ton of em, and not a one has had head shake problems. i've tried adjusting where i'm sitting, adjusting the suspension a...

Hello people! The cylinder head has got a couple of seasons track record with very good results (winner of the Nordic Supermono Cup 2009) with high power and outstanding reliability. However, if I would have done it today, there are still some things I would change for even better performance...

Can anyone guess what this head is off??

Well, it had to happen! 2002 650 cam gear bolt came loose and all hell broke loose. Bent valves, etc, etc, etc. My problem is now that I have replaced all bent, broken and/or worn parts, it will not run. I suspect I have not lined up all timing marks correctly or have not put cam in...

I wasn't going to pull my 650 appart. I was planning on storing it for a while. But one thing lead to another and now we have photos. http://tim-schaefer.smugmug.com/photos/ ... RUo8-L.jpg http://tim-schaefer.smugmug.com/photos/ ... h9yQ-L.jpg http://tim-schaefer.smugmug.com/photos/...