head

Hello - new to the forum, and soon to be riding a berg (long time KTM rider). Can anyone post a pic of the steering head decal on the 2011 FE 390? I'm wanting to dualsport the bike, and know there is risk in doing so here in Oregon, but it sounds like if i get a visual inspection a lot of what...

Oil leakage through hole in the head :cry: Motor runs but oil spills. Is this reparable by welding or do I nead to buy a new one? Please let me know. Ideas? Best regards Cas Maarssen Holland

Motor runs but now has a hole in the head so the oil is bleeding out :shock: I guess i need to get a new/used cilinder head. :( Any ideas? Sites for parts? Used parts? Please let me know. Appreciate it! :wink: Best regards Cas

Yes, I know who used to sell them with his 700cc kit. And if it were possible to contact Ben I would presumably have one by now. But anyone who's tried to reach the guy lately knows the obsurdity of the task. :angry: Anyone know of a reputable custom head gasket maker? Or, maybe I can reuse...

Whats the feeling about these found on ebay he can make to size good prices. Looking for one to fit a fs650 2004 what thickness? how much can you bump comp safely up by installing a thinner one? http://www.ebay.com.au/itm/HUSABERG-200 ... 4842a09b0d

Wondering if the modified head from 2008 KTM 300 will fit the TE 300? Part numbers look the same, but the blurb reckons the '12 300 got a new cylinder which makes me wonder if cooling ports or somethinh else is different.

can i fit a fx\fc470(2001) cylinder head on my fe400(2001). my fe400 is buildt with 500 cylinder i think so its now 470. im trying to find part number for my fe400 head but cant fint it. Thanks

has anyone taken theres off alltogether.there is an update for the 09 to replace them,but i was thinking of taking it off & leaving it off

Has anyone had a problem fitting the Akrapovic header mount plates flush to the head? I have the 2005 FS650C. On mine there is unmachined head casting material between the two machined surfaces where the plates would (should??) mount flush. This casting material contacts both the plates between...

Anyone doing any head work in Syd. Will need to get the head ported on the 570 at some stage? and is bergos the best source for HC pistons?

Has anyone ever put a 470 head and piston on their 650? I have a lot of spares now and was thinking when its time for the 650 to come down to swap same heads and up the compression ratio

Hi all, I went to the peak district for some green laning on Sunday (awesome by the way, and well worth a few hours drive for anyone that's nearby), and after about 4 hours of riding the bike cut out. I left it for 15 minutes and it started up ok, so carried on, half an hour later same thing...

After having the y fitting in radiator hoses fail on my 2010 FX450 at race a couple of weeks back and seriously overheating the motor. I had some concerns about the piston, then during an enduro last weekend it started blowing coolant out the overflow. So I decided to tear it down and replace...

Hi anyone know if i need a gasket or somthing where the headers go in to the head? on a 03 fe400?

I have a 2005 fs650e and I fitted it with some dirt tires and went to the local mx track on the weekend. upon my return I noticed some oil leaking from the rear engine vent tube (no worries) easy fix. but I also noticed some oil came out of the weephole on the right side of the head. I have...

Hi, I am not sure this is the best place for this post, but I am looking for a new cylinder head (could be used if works) for a 650fe 2004...mine just cracks the cylinder head gasket ending on cooler fluid spraying everywhere! that's the fourst time that it happens and we tried to realign the...

Good evening to one and all, i'm after some help, just sourced a set of 17" super moto wheels and tyres for my beloved 450 FE, it has been running the standard off road set up i.e 21" front wheel. The speedo head is set up to the 21" wheel and is calibrated to 2205mm the circumference of that...

Doing my first oil change and i have taken the banjo bolt out and screen out of the oil line othat go into the head. After pulling it apart and cleaning it i noticed that one end of the screen is closed and the other is open.. Now I am not sure which way to install the screen, open end into the...

I just bought one. going to try since my stock shock seal only last about a year. any one have any experience with it ? Regards

Can you help!!! my brother has bought a 2002/3 650fse with a blown head gasket when we removed the head the gasket had blown at the front we replaced the gasket torqued the head to 45nm and it ran for 20 mins or so and then blew at the rear.and when i say blew its distroyed!!!.Is that head...