carb

Hi There, Just a quick one from here, My biike does no longer do the snap wheelies in 3rd, and hesitates a bit on the throttle. From low revs with fullt throttle it hesitates, closing the throttle just a bit the power is stronger. Hope someone can give me a quick hint on these symptoms...

What add on's have been used that really work on the pre 09 carb bikes. I note inlet and outlet venturi modifiers, fuel bowl changes and pumper covers. Have the Kein carbs changed from 04 to 08?

My bike running lean so I took the carb off it to adjust it. Anyone have the maintenance manual or can scan or fax the carb page to me? I don't mind doing the work myself but I don't like to do things without proper instructions or directions. At the very least a decent exploded diagram would...

Having recently fitted a 39mm FCR MK1 it ran a bit off at low speeds so I've had the carb off to change some jets thus.. 162 MJ DMS needle, clip 3 38 PJ PAS 3/8 out PS 1½ out 200 MAJ Took the APJ rod out so no squirt for tests (haven’t found the right widget to limit squirt)...

still having trouble w the idle.ive checked the valves there fine,cleaned the carb and all air pass.and jets.its a dellorto phm 40mm i went up a size and down a size on the pilot.it ran or idled a little better but after 15-20 seconds it would die.and thats only if the mix screw is turned in...

98 FE 600, On my last outing back in November I thought I had it sorted out. My issue now is when in tight woods the bike stalls and finally fouled the plug. My settings are 170MJ, K51 Needle (second clip from the top)DR 272NJ, 35PJ,45SJ.When I installed a new plug and got it running I think I...

Hi all as you may or may not know i have bored out my 41mm fcr to a 43 mm and the problem I'm having is that at a constant throttle opening i am experiencing a slight miss siting at 3800-4000rpm at about 1/8-1/4 throttle and the miss seems to happen every 10 seconds or so any idea ? . to...

I bought a shot Hsb 400, and repaced the engine with a 650. Now the carb is still from the 400, and as soon as I get my new cdi, I'm planning to go riding. Will the carb cause me any troubles? If it will, how do I prevent it? Which jets must I cange and what sizes do I need for the 650 setup...

Firstly, wow! excellent site and lots of info for us newbies! I bought an '03 FE400 Last week and I have a problem which is driving me mad. Every time I try to start the bike it floods, I turn the starter and fuel gushes from a overflow on the carb. On top of that, theres a little oil leak...

Hi, I have an '03 501 FE which currently runs with the Dellorto carb. I have been told on many occasions that a good modification is to upgrade to a Keihin FCR carb. Could anyone tell me what improvements it would be likely to give me and exactly what I would need to carry out the upgrade and...

does any body have any experience with this vent system? http://www.pcracingusa.com/carburetorventsystem.php . seems hard to go wrong for $18. bogged the bike out twice, once each way crossing the pack river this weekend. I'm also going to try out vikings trick of putting a shield in front of...

I just got my 1998 FC501 running. I picked it up as a basket case, and many thanks to fellow members for all the tips. By the way I just found a new set of the day glo yellow plastic (only missing a front fender and front number plate). The bike runs very strong, but a little loud (full big...

will a husaberg 400fe 2002 carb fit a 2000 fc 501? thanks

hi guys i am wantin a new carb but not sure what carb to buy any one have any advice? thanks barry

does anyone know of or have heard of a bing carburettor i am after one or parts have nearly finished a ground up resto on my husky project bike 1973 cr250 to run in the classic scramble series.you older blokes could surely help :lol:

I thought some may like to read this . It made so much difference to my bike that I wanted to share. http://ktmtalk.com/index.php?showtopic=180932

Hi Would any of you guys out there no the setup for a Mikuni TM40 pump carb for a 1995 Berg fc600. Have just aquired the new carb but when attached to the engine causes back fire through the carb. i know that this relates to fuel starvation as when I attach the old Dellorto the engine runs...

My bike always leaks gas when fully laid over as any kehien carb does in my experinece with huskys and husabergs, but lately my bike leaks gas out the vent tube when I lay the bike over only a little bit. A guy rode behind me and he says it was dripping gas as I went around corners and believe...

Since 3 weeks i own a 550fe 07 with 400 km. Problem : motor bangs and puffs in lower rpm by closing gas. solvings as so far : New CDIunit on it. idle jet is 45 (normal is 38 - 40), standard needle OBDVR, position clip 5 fom above, idling screw is 1,25 windings out. Main jet 180...

OK, so I decide today would be a good day to do the pre-season usual maintenance on my 'Berg, a '00 FC501. I need to completely go thru the carb as one of my list items, as it was sputtering when last it ran (Spring '07: I know, I know, I wish I rode more often, too, but that's not my reality)...