carb

My FE400 2003 is fitted with a standard carb and starts perfect hot/ cold using button or kick, ticks over lovely, revs up smoothly and runs great the only snag I am having is when I throttle off into a corner or down a steep hill when I try to open the throttle back on slowly there is a...

can anyone tell me if this thing will work on an 98 FC501

One of these is on UK ebay for £190. 2 more days of bidding to go so could rise even more. Is it worth the price?

while'st dealing with my oil-in-the-airbox-cause-i-flipped-upside-down-issue i've noticed my carb is mounted at an angle... is this how it should be ????

Bike starts first kick with choke.When the engine warms up,I stop the engine.If I kick it right away ,it start but if I leave it 20 second it starts ONLY with the chock on.Carb disassembled,cleaned but has the standard jets and settings so nothing improved. Any suggestions? thank you wery...

I have just fitted a brand new PHM 40 Dellorto carb to my Husaberg FC600 its exactly the same model that was on there previously, what i need to find out is, can i just fire it up and adjust the carb as i go??? :?:

Hi everyone, The choke lever on my bike is impossible to reach (2000 FC600). The lever is hidden up near the top of the carb between the frame rail and the tank and you need very skinny fingers to operate it. It's been starting kinda OK without the choke, but has become VERY difficult on the...

2002 Husaberg FE650 - Gas flow out of small overflow tube for dellorto carb. Carb has been dismantled, cleaned and put back together and still getting the same problem. Any ideas please? Bike has over 100 hrs on it. thanks.

What Main jet are you guys using on your 550s? I have a little hesitation bog when landing and nailing the throttle in third gear. It scarred the you know what out of me last night doing a double and it happened every lap. The track had a table top and when I would land with a short run to a...

Last weekend took my Berg from 1000 feet to 7500, I only changed the MJ from 188 stock -> 178, seemed to do the trick .... it ran awesome, no backfire, good power range ... Question I have is , how do I get at the needle clip on the FCR carb? After I remove the top of the FCR carburetor...

I have an 02 501 with the Dellorto. It has worked well for me to this point. The bike runs and starts fine. The only complaints I really have is the throttle seems to hang a little sometimes. I do not mean the throttle cable. The throttle snaps back quickly when you twist it, it just seems to...

Hello, As I read all the different opinions about jetting This mine now with highest HP output. Sea level at about 18-20degrees bike 650cc 2004 42 pilot needle OBEKR second from top main jet 170 with pump on valves 35-31,5 5lineaweaver) complete FP exhaust Greetings Madero

Hi mates, Actually I'm riding the following original carb setting in my 1998 FE 600. MJ- 195 NJ- DR 268 Needle- K51 N. Clip- #3 PJ- 40 8original is 35) SJ- 45 Mixture Screw- 1&1/2 turns Riding altitude is about 2000 ft. I think this must be very conservative setting because I do...

I finally got around to putting Dale jetting kit in last night and it went reasonably well. After much mental debate I left the AP rod in and will try it that way first. My major difficulty was in getting the throttle cable cover back on with the carb mounted - you can't rotate the carb...

has any one tried the quicksilver carb as an alternative to an fcr.dcr in england are selling them for £150.00 brand new could they be a cheap fix for carbing probs ?.i have been looking for a new carb but the cheapist fcr in 41mm i can find second hand is about £200 + jetting and cables...

Hello all Come July i will be heading to the Italian Alps with some friends for a week of trail riding. I am running a `04 Fe 450 with stock jetting, currently running at sea level upto 2000 feet, bike running great. We will be riding upto 8,000 to 10,000 feet or so my pals tell me, what...

Hey folks, A small group of us from the East coast are heading to Moab the 1st week of May for 10 days of riding. Curently at sea level. Any suggestions regarding tweaking / adjusting the carb for the elevation change? Riding a new to me 05 FE550. I assume it is currently stock set up but...

I`m having a problem with water getting into rubber boot on back of the carb,not sure if it`s coming in from the air filter or not.Please help it`s driving me mad.

Had a rather wet ride last weekend and my bike(04 fe450e)was filling the carb vents with water and running poorly and sometimes stalling during the deeper crossings.Anyone install one of those PC racing carb vent systems...how did it work and where did you mount the box?....thx...nsman

i took the carb into the engineer's and he has bored it to 41mm as he did with scoots. i had a blanking plate made for the end of the TPS shaft and most importantly i had a belmouth fitted. most of you will have heard of this through dale. i had the alloy belmouth machined (as opposed to...