carb

Hi all In my mad quest to rebuild my blown up '99 Fe400, I've now got a fe600 engine complete with carb. Supposedly a good runner but who knows. Anyway, it wouldnt fit in my fe400 frame (99 e-start version) so I bought a frame too from someone else, and engine plates, and plastics, and a...

First,I want to say this site has been awsome! 2 years ago I started with a total basket case of a machine,E-start failed a day after I bought it,after it did start ,it ran so bad I almost borrowed my neighbors revolver and put it out of its misery!I had no clue of where to start.Thanks to you...

Hi fellow berger's Was out riding to day on my way home from school when the bike just died on me.. was just like it had run out of gas, but there was plenty of fuel.. so i stopped and and had a look at the engine to see if i could spot something, but everything was normal, so i try to...

Perhaps one of you can help me diagnose my newest problem with my 600. I was out for a short ride up the road with the beast when it backfired and lost all power. It didn't die, but I had virtually no bottom end, and no mid range. When I opened the throttle it came on in the top end and just...

Whats The Differance Between An OCDVR And An OBDVR Keihin Needle?

Hello out there in Husaberg Country. I'm brand new to the world of the Husaberg. I just purchased a new FS650C three weeks ago. First motard bike I have ever owned or rode. So far, I am really having tons of fun on this heavy hitting little rascal. It does the sweetest wheelies of any bike I've...

ok after last weeks break down i am getting to the bottom of things but still need some answers when i turn the fuel on it is filling the bowl; and the needle valve works ok BUT fuel is flooding into the air box via the small hole at the bottom centre of the carb now i don't know...

I have a full Doma exhaust system fitted to my otherwise standard 650 engine i.e. not tuned. I have tried several different main and pilot jest for the carb but can't see to find a happy medium/combination. Does anyone else have the same system/carb on their bike? What jets have you got...

It is certainly a design fault for this bike to get water in the carb boot each time I wash it. I want to find a way to prevent the air filter getting wet . After washing when I check the air filter I see that almost every part of it is saturated with drops ready to be sucked to the carb (...

I have an intermittent stall problem, and there is no significant reason for it. What I want to learn is the function of the bunch of hoses I mean do they just work one way out the carb or does any of them need to properly suck air. Some times mud collects at the tip of them and dries so they...

just bought a 2003 400 fe berg having problems with the dellorto carbs, is there a better carb that fits my bike ?

I got this brand new shiny carb from eBay: http://cgi.ebay.com/ebaymotors/ws/eBayI ... AMEWN%3AIT Really the same exact carb as this: http://www.motorcyclecarbs.com/PHM_W19.cfm Berger and I thought it could work on my 2001 FE501e but we're having doubts now. It seems to be made to...

Okay, freakbergers, I put the pshb carb back on my 96 fe600 becouse no stinkin' carburetor has ever whipped my butt! I cured the loading up\flooding problem as I discovered that the idle air bleed to the pilot jet was restricted. Among you who offered advice or ridicule, Taffy wrote,"those flat...

Hello All, I've recently bought a 20 hour old '05 FE450E, but my first chance to ride it will probably be in a 4 hour hare'n'hounds in 2 weeks. In preparation, I'm going over the bike to make sure all's o.k. Now for the first of my stupid questions.... How do I get the FCR carb out to...

My byke is 400fe 97 with a dellorto VHSB 38 QS. I have a crack on the guide slide as you can see on the picture below. Is there some-one who know where i can find this and have you already see that Thank

here is one i hope dale will help me with: bored out 'scoots' 37mm carb to 41mm and it went ok after i decided to use araldite to bond the two lower chambers. i test rode my FE400e bike and to cut a long story short; the bike wanted to go leaner on the MJ. fine except i went through 150...

i am thinging of changing the carb of my 95 fe 600 sm. i am still a student in university and my funds are limited so the 41mm keihin FCR is a bit expensive to me. i am thinging for a 41mm dellorto with acceleration pump which costs in my country about 235 euros (1 euro more or less equals to 1...

My '95 FE501 supermoto has a 38mm Dellorto carb, I've noticed that newer models have a 40mm carb. I'm wondering if the 40mm will bolt right on, or require a new intake manifold? Also what kind of power gain can I expect?

:twisted: :lol: I have been having problems with my 02 470 not starting that great from hot or cold and when i drop it its been a pig to start. I spoke to taffy at a local enduro and done the usual bigger battery new stator new plug adjust tappets ect but it still dont start right. I then...

My 02 Fc470e starts and runs great at sea level-however where i ride fluctuates between 4500-7000 feet the bike gets finicky and wants a slightly cracked throttle to start, button or kick. it wont idle and when it does idle if i crack the throttle a just a bit it wants to wheeze and die. when...