carb

Hi, I was hoping someone would walk me through how to adjust the valves on a 650. It is having a bit of a ticking sound when fully warmed(typical valve sound i guess). I am specifically interested in the "TURNing" method, since it seems to me that it's hard to get an accurate measurement ,cause...

I bought my '95 FC600 about 4 days ago as a non runner, although the previous owner assured me it was running in Dec '12. I have stripped the Dellorto carb (roundslide) and cleaned out all the corrosion and crud that was in there. The bike was a non runner as it was dumping all it's fuel...

Just bought a new TE300. My dealer is suggesting a mod to the carb including "factory jetting" and new throttle slide. Said that this is the same setup that the factory guys run. Supposed to increase low end chug and broaden power through out. Costs about $100. Anyone familiar with this, or...

hey on a fcr carb there are two choke levers, one red and one black. I presume the red one is hot starts and black cold starts. I am correct?

I was looking in my paperwork and I show that stock my main jet should be a 190, when I cleaned my carburetor I had a 200 main, the rest I believe were stock but cannot be sure about the needle jet I don't remember looking at it. anyways my bike runs good and doesn't (Backfire) or what I would...

Im going to bore my 41ml carb out to a larger bore, Any tips or advice appreciated from those who have done this to there carb? thanks in advance.

I like to tell you all of the tails of woe we get here now and again. We've had a 1994 Husaberg FC600 in. it looks bloody rough and it is a non-runner. the owner had a friend work on it, he shorted out and bang the coil popped a lump in the side. It also had an electrex stator on it that...

I just picked up a 450 and after puting a few miles on it I've noticed a flat/hesitation/sputter spot around 1/8-1/4 throttle. Got it in the dirt and noticed it hard to maintain smooth throttle in the rough stuff, very jerky. Starts easy and pulls hard, gets 60+ mpg DS it. I did notice if I...

My 650 has sat in the garage for a while with old gas in the tank. I drained the tank and want to clean out the carb. What's the best way to clean it out without pulling it out of the bike? Thanks, Mike

I have got my 600 running pretty well but I have noticed somthing kinda weird. The bike blows back thru the carb every once in awhile.The bike runs good once it starts up but it is hard starting but does have a little backfire when reved. The carb is completly rebuilt and and is a little rich...

having trouble finding parts locally Before I start looking for long distance orders. Anybody know what years KTM carb Jets can be used if any?

well I bought my first husaberg, i have been riding ktms for alot of years an found a used husaberg cheep. it has a the wrong carburator and backfires on startup. once started it runs great but seam rich. I want to go back to the correct carb and check the valve adjustment. so what carb should...

FWIW just saw a big carb on ebay, http://www.ebay.com/itm/43-5mm-Keihin-F ... es&vxp=mtr

When I picked up my 97 Husaberg, the throttle was completely stuck. After removing the carb I found that it was completely filled with green thick gunk. So I went ahead and took apart the carb and cleaned it as best I could. Now my throttle moves freely and snaps back in working order...

hello everyone . iam hopeing someone can tell me what iam doing wrong !!!! 650 berg 02 eng 04 frame fcr41mx with choke an hot start ! ive cut 5m off inlet rubber boot . carb fits nice but only without brass fuel inlet pipe ???? even without it there only 3mm gap between carb an exhaust . the...

Hi ! I found 39mm Keihin FCR with t-cables and t-cam for about 88 GBP Question ? Is it worth to mount it to my FE400 ,i read on forum about the benefits of it but the jetting gives me a creep 8O .

I've been searching the threads on here and it seems the consensus that the stock Dellorto carbs are no good. I've got a 97' FE400 which has had carb problems since i bought it a year ago. I've tried lowering and raising the needle and adjusting the idle and mixture screws to no avail. This...

Hey there everyone, A few weeks ago, we spoke of my carb and in the end it was pointed out that mine needed to be set up following this awesome thread by JoeUSA. Saturday, I picked up my box of carb parts from the third and only remaining shop around me without the necessary changes being...

I got to say I stil can't get that bike to start properly. The problem must be in carburettor, cause I know my kick is fine, but hard kick won't start it, choke on or off, playing with gas or not. after long time, it will and then after this it will start all day long, even next day I guess. I...

on ebay, not mine,,,,,,,,ends soon http://cgi.ebay.com/ebaymotors/ws/eBayI ... MEWAX%3AIT 2005 yamaha yz 450f carburater and cables