wheel

hi has anybody got a rear wheel to fit a 2009- berg (18") preferably a blue d.i.d. one cash waiting thnaks

I have Brought some new forks for my bike and have now realised that the forks are the later type with the bigger spindle and my supermoto (ktm/behr) wheel is earlier with the smaller spindle. Is it posible to retrofit the wheel into later forks and what is involved? thank you.

Could someone messure the front wheel speedo replacement spacer for a FE 2002 so I can make my own in the workshop ? Im kind in a hurry since I would need it tomorrow. Also I can´t find the dust seal sizes anywhere both for front and rear. I would appreciate your help alot. Thanks.

I'm looking to set up my '09 FE 570 with an SM wheel set. I have a set of Warp 9's off my old DRZ. The guys at Warp 9 tell me that the rear will bolt right up, but the front will not. What I'm wondering is what the difference between my 17" warp 9 and a 16.5" wheel really is? I've found a...

Hi, I had the front wheel off my 08 FE550 this week and did not pay enough attention to what the spacing of everything had looked like while disassembling Everything went back together fine with the brake disk lined up etc. However, there is some of the axle exposed on the riders right side...

hi everyone. i've got dilema, whitch size will work better 19" or 18"on fx 450. i mostly ride woods and technical stuff. i want also make my bike little bit lower. does anyone know differences between this two wheels. regards

I want to SM my 02 FE501. Just for road legal fun – poss some track & def able to swop back to enduro easily. I’m able & willing to have a go but I’m no master mechanic so I want to make life as easy as poss but not pay through the nose. I’d appreciate your comments albeit I’m probably going to...

I believe 04 speedo's can have the wheel diameter changed by the abuser. (from 17-21 or vica versa) I cant find any reference to this in my manual. Can anyone enlighten me as to how to do this please? Then I can keep using my original speedo when I fit my motard wheels.

Does any one have a rear wheel to sell 18 or 19 will do. My rear sprocket shattered at the weekend taking half the shoulder/ lip off the hub with it :( ... Im in Preston NW England

hi people racing a berg fs650 supermoto can I lighten fly wheel and if so by how much before I get a negitive effect, currently running high comp piston hot cams etc hope u can help rag

Ive got a 2005 fs650e which has a 5 inch wide rear rim (engraved on the rim says 5x17) I thought the street models didnt come with 5x17 but a 4.25x17 and cush drive. I swear my bike has cush drive with 5x17 rim can I be wrong? Headstock says the bike is a FE model. Does the 5x17 not...

Why does Husaberg recommend a 310mm rotor for use with there 6 piston caliper? Every other company uses 320mm rotors and Husaberg also offers a 320mm rotor for use with the stock caliper. Also, will a 17" x5" rear wheel fit in the FE550e swingarm with a 160/60-17 rear tire or do I have to use...

When I received my NEW 2008 FE450 the displayed wheel size (on the computer upon start-up sequence) is not correct. The manual tells me what it should be, but does not tell me how to change it.... Anyone figured out how to set the wheel size into the computer? My dealer does not know...

i've got a 2008 fe550e but it's now set up for supermoto. how do i change my wheel size on the odometer from 2205 (21inch) to 17 inch. i've read through the 2008's owner's manual but it does not mention how to change wheel circumference from 21 inch to 17 inch??? thanks, frank

Hey Guys, Haven't got as far as pulling the wheels off the bike yet but was putting togthr a list of spares as I went along and just wondered if the wheels bearings on the 04 550 was an unusual size or if they're common and can be sourced from a bearing shop.. If common...

I just wanted to let folks know of the hassle I've had with my wheels. I used these guys; MJB Racing 73 Station Street Cheslyn Hay Walsall 01922 414228 http://uk.youtube.com/watch?v=lDXx5F2qxMg They did my wheel anodising OK, but I was not entierely happy as it was uneven...

I like many have a Berg that won't start on the electric button (Fe550e 2005). It now has an R6 starter and bigger battery, valves and auto decomp checked and starts easily with the kickstart. (if it hasn't fallen off, though that's another story) The starter motor seems to spin though and...

Hi guys, you may be aware that the standard issue spoke nipples on the FS650E SM wheels are plain carbon steel with a paint coating. I had my wheels overhauled recently, and they came back fully re-built, but the company had wire brushed the nipples leaving bare metal exposed (which would...

Wondering if Warp 9 wheels are any good or not, thanks?

Anyone know the bearing sizes/numbers so i can get some from bearing services in the morn? save me taking the wheels to work with me in the morning lol 2000 FC ta :D