wheel

hi... I want to put rear wheel from ktm 690 sm because it is 5.0 rim to my husaberg. do you know if it suits the hub without patent? thanks

Hi I have a husaberg supermoto and i want to replace the wheel bearings in the front wheel and rear. i heard a noise and i think that is the problem. I dont know which brand to choose. i found these (moose-all balls-pivot works) does anyone know what brand is the best? i think all balls using...

KTM seems willing to allow axle bearings to be a premature failure point by most engineering standards. So, after replacing far too many over the years, after playing with seals and injecting grease and still not seeing adequate lifespan, I'm going to take on a project and post it. But...

Hi Got a 2007 650 Berg Need to replace the front and rear wheel bearings. Optimal would be to buy the bearings somewhat cheaper from someone other than the dealer. To do that I need some kind of identifying number for the bearings. Can anybody help me with that? Also as I am...

Hi Guys, I want to order set of japanese good quality sealed bearings for my 2011 FX450, ebay and shops are selling allballs **** and everyone knows how long they last, my rear bearings feel worn but no play there yet and I don't want to take them out and wait with stripped bike for the...

I'm considering a Supermoto wheel setup for my 05 fe 650. The Excel's are pricey, but the Warp9 wheels come complete and are more affordable. Anybody have an opinion of the qualify of Warp9? Also, Cyclegear advises that I need 17x3.5 front and 17x4.25 rear, but they had some question re tire...

hello. i was planning to get my older rim (BEHR) onto a 2001 upside down fork on my 650. As i can see the inner diameter of the bearing in the front wheel is 17mm, and the axel in the fork is 20mm. is it possible to change the bearing to a 20mm inner diameter? maybe theres a kit for...

Hi I have a 1996 Fe 400 and i cant find front or rear wheel bearings or even the sizes! If you have any ideas let me kow. Tanks Taylor

Looking for wheel axil diameter on a 2011 FE 570 s, thank you.

Hey folks want to get spare wheels for my '08 550 Questions: From what I have searched and read here, KTM sets from '04 on will fit Correct? or same on the parts if I wanted to go build my own KTM - hubs, spokes, rim sets etc? Thanx !! HR

hey, i have a set of excel pro series supermoto wheels on my yamaha, but these wheels are pretty much universal, the mounting for the brakes and sprocket is interchangeable, but they dont sell mountings for husabergs, but they do sell them for ktm, so im thinking since ktm is making the...

Been searching for some new wheel bearings for my SM but I can only find them listed for 04 and after. Anyone have part numbers or dimensions for the front and rear seals/bearing sets? I'm not sure if 04 is the same.

Hi I took the rear wheel the other day to change the tire. I notice it said in the manual to grease the thread of the wheel spindle and the collar nut, but shouldn't I grease the entire spindle (i.e the part that goes through the wheel) ? Thanks Mati

Hi all Todays ride finished sooner, as it can be seen [attachment=0:hidhwqvm]Rear_hub.jpg[/attachment:hidhwqvm] My bike is a 02 400, I'm looking for one used rear hub or complete wheel. If someone has one please post. From what I've read here at UHE, the KTM for 01-08 will fit, but the 01-02...

Where to get a new 18 inch rear wheel just the rim ? I have been looking an buchanns isn't cheap so wanted to know if any of you new where toget one so it can be laced with a front hub has to be euro style

I have been doing a lot of mud riding and as a result the rear wheel spacers died allowing mud and water into my bearings which also promptly died. I searched around and found a moose racing bearing spacer and seal kit. Kit contains updated bearings and steel sleeves on the sealing surfaces of...

Hello, I have a small problem that my free wheel hub (800.40.025.000) lost couple tooth for the second time during last 40 hours, so I have two questions: 1. How to avoid such failure in the future? 2. Can I remove free wheel gear with all components and use my bike with kick starter till new...

Hey guys, I am looking for a decent used set of spare wheels for my 07 FE550e. What is the year range that these wheels were used? Also, are there any KTMs that use the same wheels to broaden my search?

Hello everyone: ). Just changed the oil 2 hours ago. OIL: Agip 5w-40 racing Lately when engine was warm and was driving...geared down and holded clutch lever down, it blocked the rear wheel, when the speed was lower, if then wanted to leave on 1st gear, it made kinda like metallic bad voice down...

Does anyone know what way the tread goes eg left or right on the gear torque wheel to pull it apart and shim it????? and the best way to hold while undoing the bolt. :cheers: