wheel

I'm getting a second set of wheels for street and gravel riding and looking for the widest tire that will fit my rear wheel. All I'm finding are 120's. I'd like the widest dual sport tire I can find, but doesn't seem to be anything out there - anyone else solved this problem?

Hi I have been using a oem 48 tooth rear wheel sprocket on 2008 berg. I noticed cracks in it today from middle of a tooth down. By the time I got back to trailer another crack about 1/3 of the way around the sprocket had appeared. The second crack may have been caused by the flex from the...

Anyone know what the HP at the rear wheel is for a 2002 FE400? I would guess betweeen 35 and 40. Greg

Trying to source a set of rear wheel bearings for my 01 fe650e. Not too much luck. Do KTM bearings of the same year work. Lots of searching and no luck. Thanks

Anyone tried ceramic wheel bearing? I am told: a. no rust b. lower drag c. resistant to heat d. last longer

hey I have a cracked wheel on my 1998 fe 600, i found a 1999 fe 600 wheel on ebay are they the same?

Hello everyone I'm new Berger from Taiwan. Husaberg's bike just launched in Taiwan in 2011. so this brand is new and so mysterious to our people... I want to buy a 5" rear wheel which is on Husaberg official force-part manual for my FS570 The part number is 5841000144430 The manual have...

Tire to tire / Wheel to Wheel start, motorcycle/dirt bike. [youtube:2cjgtc7c]http://www.youtube.com/watch?v=ZJZxfSbJB7U&list=HL1321110681&feature=mh_lolz[/youtube:2cjgtc7c] Hope this helps next time you are in the middle of know where and your electric starter fails. Todd

has anyone the code for the front wheel bearings on fx450 2011 . thanks

Hi Everyone, just registered and need your help. Have just bought my first berg, 2007 fe450, need to change the rear wheel bearings ,wheel is off the bike no visible ciclips, internal spacer is rotating freely , how do you remove them :?: normal weather here in the uk, wet ! but need to get out...

Hello,recently I bought some triple clamps with less offset,around 11mm.It was a sweet otion to buy them,because I was searching long time to found them.The pre-owner said that the yokes fits perfectly but when I tried to instal them,I found that fits to frame but they are 12mm wider from...

Something is up with my front wheel. Since cleaning up the inside of my motor (dvsk, bigger valves, match porting, a slight bump in compression, and sorting out the jetting with a Barret muffler) now if I use a bit of throttle in the lower 4 gears the front wheel wont stay on the ground! (to...

does anyone know what rear wheel bearing are in , i mean what number is the bearings.

Ok so my dealer got a reply from KTM that 5" rear does not come stock with my FS 570 black edition. Was some kinda false advertising or something, damn. 4.25" looks like a friggin moped wheel and I can't run my Mich pilot 16/63 slicks on 'em either. They quoted me a 5" non cush wheel for about...

Will a 5" ktm 17" (non cush) wheel fit an 2005 FS650? I think it will, but want to be sure before shipping it across the country. Mike

HI TO YOU ALL CAN ANY ONE HELP ME IAM TRYING TO GET A 19" REAR WHEEL FOR A 52 PLATE FE 400 I LIVE IN EAST YORKSHIRE HAVE TRIED DAVE CLARK HE IS LOOKING OUT FOR ONE FOR ME ANY ONE NO OF ANY ONE SELLING ONE OR JUST A HUB AS RIM IS OK :bounce: :bounce3:

Good evening to one and all, i'm after some help, just sourced a set of 17" super moto wheels and tyres for my beloved 450 FE, it has been running the standard off road set up i.e 21" front wheel. The speedo head is set up to the 21" wheel and is calibrated to 2205mm the circumference of that...

I would need a front hub for 20mm axle, so my second set of supermoto wheels would be complete. My bike is -02 so all the hubs from -00-02 bikes should fit but what about the older hubs? And what KTM hubs will fit? Propably exc 400 and 520 -00-02 but what about older models?

Hey guys don't know much about the mechanical side of things so my question is what do I need to do to be able to fit the original dirt set of tyres back onto my 06 Husaberg Fe550 (so I can have complete motard and dirt wheel setups) It was converted to motard by someone else so I don't know all...

Has anyone got a good fix for the front and rear wheel bearings as far as stopping water from getting in. I have a brand new 570 and done a creek crossing. I can see where it gets in on the front between the axle clamps on the bottom of the forks and goes in along the axle shaft to the centre of...