wheel

I remember reading someone's trick for mounting the 5inch rear wheel, but I can't find it now. I think it was bringing it in from the bottom and taking the chain guide off.... Cheers and thanks Mark

hi, i have a 02 fe650e. does anyone know for sure what ktm wheels will fit the front and also the rear? thanks in advance. tuts

I know this should probably go in the wanted section but it is as much a request for information on where I might find one as it is a wanted add - hopefully the moderators agree with my liberal interpretation..:-) My spanking new bike has a 4.25 wheel and I wanted the 5.00 - I'll trade if...

okey dokey after spending mass amounts of cash ($704) on a stator I found it came with a fly wheel. Does this really need replacing as I haven't had any issues over the last weekend (10 hours of riding). I also have a problem with my headlight. There's no power getting to it. The switch is...

Hello all , Has anyone fitted late model KTM rear wheel to 2002 berg ? I see where 2003 front wheels interchange and I know that KTM rear wheel bearings fit my 02 hub however I do not know if sprocket and rotor spacing will be correct . Anyone using talon hubs ? Also , I...

it looks as though I am heading towards a 07 vs the 05 550 option I had but I will be changing out the black wheels for silver and wanted to ask why the 07's list the rear as a 4.25 vs previous years 5.00. I would prefer the wider wheel but wish to know if there are real fitment issues. From...

Sold

Posted: 2006-08-19, 20:08:21 Post subject: front wheel centre -------------------------------------------------------------------------------- this is my 1st post so hello peaple, what i need to no is does the standard front wheel on a husa 470 sit centre in the forks...

this is my 1st post so hello peaple, what i need to no is does the standard front wheel on a husa 470 sit centre in the forks,!!!! i.e when i measure from the rim to the inside of the fork legs mine sits 10mm to the left , this is looking at the bike from the front. i hope this makes...

Hi again fellas, Will the rear 5x17 supermoto wheel be ok for the FE550S or only the 4.25x17 can be fitted??? Is there space for the 5 inches rim? Thanks!

Check out these front wheel chocks at baxleycompanies.com Gee-Bee

I did a search and can't really seem to find the answer, so the Question: Is there a way to fit an '02 front KTM wheel on an '05 Berg or should I look into having a larger "correct" hub laced up. Thanks in advance.

Ive just began to learn driving on one wheel. I dont come that long but two weeks ago the bearing in the flywheel gave up. Ive opened the engine to change all bearings and ballbearings. The piston had some scratshes on it wich I suppose came from the driving on one wheel. I wanted to ask you how...

Hey guys I noticed when I pulled my rear wheel off for maintenance, that there were two ways I could put the keys on the axle ends back in. The way they were in had the narrow perch touching the adjuster bolts. This puts the axle toward the back of the slot (with a good chain). If I...

Inquiring minds want to know. :)

Does anyone know how to change the Wheel Size on the 04 Stock Berg computer? (I'm getting ready to add some Tard wheels, and I'd like to show the correct speed) Thanks.

Hi, I'm sure this has been covered before, but had a quick look and can't find nothing on it so here goes: :wink: I am looking to buy a spare set of wheels for my racing. I have a 2002 model FE650 which has apparently a smaller front axle size than newer ones. I was wondering if...

Hello, Where(inside Europe) to order new spacers for rear wheel ? Is there better than the originals available ? -Mika

:D just had a chance to do another 02 warranty update. an 02 fe400e, 680mi, when i removed water cover i could'nt believe my eyes there had never been a waterpump rotor, pin or circlip insalled on bike from factory & never hinted at overheating, absolutly no...

hi all folks, i want to know your experienced thoughts on this one. 95-96' fe 600 transformed from enduro to supermotard. the use is street racing, some trackdays for practice and enduro. the rear hub has no cush drive so there is a straight,hard and rigid power delivery from the engine...