water

hi im new to this site but not new to husabergs i had a 650 2 year ago and sold it missed it so much i got a 2003 400 the problem is theres water coming from the stator cover is this bad ??

I have a Husa 08 550. it took a drink of water this weekend in a river crossing. I managed to get it started and back to the truck, it was not running well at all but got better as i got closer to the truck. Apart from changing the oil and the filter, I'm not sure of all the appropriate steps...

Hi folks, i need your help. I have the chance to buy my second Husaberg. It's an FE550 from 2004. The motor is broken down. It will not turn and there is water (i guess from the cooling system) in the oil. Has anyone an idea what could it be ? I like to buy the bike and fix it.......but i...

I had to replace my water pump seal and now I'm not sure if I put the new one in the right way. (Installed it the same as what I took out though...) Still leaking from the weep hole now. The old one was installed with the "open" side of the seal facing away from the water pump impeller. I...

05 FS 450C Bike has been making some louder than normal noise, so I check the valves. Little tight, I adjust and fine. try the bike and it is still loud. check to see if the main nut backed off and water pump pin was broken in 3 pieces. slight damage to the propeller. What could have...

My 06 450 fe started to make a rather loud noise in the engine and I shut her down right away and went home. Found the water pump impeller had 2 vanes missing as well as the clip to hold it. After removing the impeller I started the engine and it still had the loud engine rattle. Checked the...

HI, My Berg is leaking coolant out of the weep hole. I have read lots about the Orangeberg seal kit, with everyone saying they work awesome. Could someone please tell me how to get my hands on one. Thanks

Does anyone have a way to carry drinking water that doesn't involve carrying it on your back (Camelback)? My back doesn't like carrying the camelback, and it pulls the chest protector back into an uncomfortable position. So, maybe a fannypack with a water hose, or soft bag that would strap...

Hi all, After fitting Orangebergs seal kit and a new water pump seal everything is fine, weep hole dry as a bone, well worth the money. The reason it was leaking coolant wasn't a worn seal but a groove worn in the shaft due to the seal, I have managed to refit the new seal 1.5mm further in...

My first post, and I've just ordered my first Berg, an 08 F 550, it's not here yet, next week I hope. I've been lurking here the last couple of weeks and have learned much about the bikes, great forum and community. A quick question about the water pump seal leak, is it still a problem on the...

Hi guys, I was after a dimension of the water pump impeller if anyone was able to help me out. The dimension I am after is the depth of the shaft boss (i.e. length of the surface which bears against the shaft). My impeller is able to float a couple of mm's on the shaft before being...

Were oh were has my water gone, oh there it is, mixed with the oil, mmmm lovely. i'm guessing the common fault is water pump seal but then why was it not coming out the weep hole? i've ordered up gaskets and new seal as well as the o ring on the cases, or does any one draw another conclusion...

I noticed yesterday when I started the bike that oil was really foamy in the sight glass. I drained the oil and sure enough there is water in the oil. I know I read on here somewhere that there is a "usual suspect" gasket or seal that might be the cause. I searched and can't find the thread...

just purchased an 04 550 fe, on my first ride l noticed some oil running down the crank case just in front of the water pump housing. there is a small hole in the housing which l presume is for this, but being my first berg i just want to be sure. any help would be appreciated.

I have water oil mix coming from hole next to water pump, my water and oil are both fine not mixed. only trickling out, only just started! any ideas please.05 fs650c

anyone help? my fs650e water pump is dripping tiny amounts of coolant from what appears to be a deliberate hole at the base of the water pump ive had this in a car before and the pump went a few weeks later,the bikes only losing a small bit of water if any!Anyone had this???????

Anyone give me a heads up on why I have oil leaking from the water pump all down the casing. Looks like its comming from the small hole on the pump. This is my third ride on it and I only noticed it today. Its a FE 550 07 model. Got about 200 kays on it now.

Hi Bergers, Thought I'd start another thread on this, although there ar already numerous ones on UHE already. As I guess many of you are aware already if you have been reading http://www.husaberg.org/index.php?name= ... torder=asc I have had a few issues with WP leaks and others on my 07 650...

Hi all! This may come to you guys as yesterdays news, but feel free to ignore it in that case. I had a 2001-2003, 650 crankcase that was leaking water into the oil. All sealing elements were in order and there were no signs of pores in the cast. After a lot of pressure testing I found it...

Took me ages to craft this baby. I'm thinking of starting up a business making them. Should be able to offer them up for less than $200 (AUD). To give me some idea of market strength, please tell me how much you want one.