water

Okay people, I know a lot of us feel very fortunate to have this site available to us. and some of us would like to donate to help keep it alive but can't justify it for some reason or another. Myself included! I have donated in other ways besides the the little money ticker on the right...

All, I am in discussion with dan from motoxotica, there seems to be a bit of confusion on my part, (go figure) regarding the seal or seals that are used. On my 98 fe600e there were two seals that prevented the mixing of oil and water, When i disassembled the water pump and removed the...

Anyone know of a water pump impeller for a 00 FE400E made of something other than plastic? Thanks in advance, husadawg 8)

I just put a new (refurb) head on my FE 400. It started right up, and sounds good, but it's pumping water out of the weep hole that is in the head. This hole appears to be a small hole that leads to the cam bearing between the two O-rings that separate the oil side from the water side. I put...

I saw an 04 450 today with the water pump cover broken. I think I want a few of those guards. Any idea who sells them? I had heard Dave Clark Racing has them in the UK. Anybody have any input or perhaps a web address? The guy with the 450 says he has a KTM 450EXE and prefers the Berg.

Hi, I haven’t done this but I have thought it about now and then. Have anyone done a good solution on the water in carburetor problem? When you go through pools of water with speed the water follow the frame to the air filter. I assume it will come from the steering head or from the engine...

While riding slow technical woods at high altitude my radiator hose popped off the water pump neck. I noticed the barb is a very small dia. to keep the hose clamp from slipping past. I am planning on welding a bead around the end of the neck and then machine it down to clean it up while...

Hope someone can answer a few questions for me. I went to buy a new 2004 FS650E yesterday. The dealer started the motorcycle and after letting it run for a few minutes oil started dripping from the "seep hole", or "pin-hole" at the water pump assembly area. 1-Why is there oil leaking from...

For the summer months it is understood that pure water cools better than an antifreeze/water mix. But should distilled water or tap water be used. I have read that distilled water is more corrosive to aluminum than tap water but tap water tends to leave deposits. Is anybody running pure water...

Hello. I am experiencing a big problem with my 2001 FS650e. Last day I started the enging I realized that engine oil is of very strange color - grey. I found out, that some water is missing in colling system and later found out, that it made its way into the engine :-( I have removed...

02 FX470E: Can the seal be remove from the housing. With out clutch cover being removed from the engine it self? Also has anyone experment with a double lipped seal?

So here in Seattle (rain city USA), my bergs been running just great (02 fe400e), and i left it in the driveway for 3 days without being run, uncovered, and its been raining non stop pretty much the whole 3 days, now the bike wont start...is there any way that all the water could have seaped...

hi; on my 02 fe650e the weep hole leaks lots of antifreeze. in the downloaded parts manual it shows a ' Seal Ring Kick Shaft 10x18x4x4,8' i'm assuming that this is the worn part. am i correct? can this be gotten locally or does it have to come thru husaberg? thanks in advance. tuts

I was riding today with enforcer4 and attempted a water crossing that ended up about 3 feet deep. I ended up on my side mostly under water.I shut the motor off and righted the bike as quick as I could but i gat water into the crankcase.Is this normal? Where does the water get in at?

i have some coolant leaking from the weephole on my 98 fe600e does this indicate that my seals are bad? is a few drips normal? I know that on older chevy waterpumps the weephole leaking was a warning that the pump was failing...