water

Hi guys, If I let my bike run for 5mins water starts to come from the tell tail hole on the water pump, I have been told it will be the two seals inside the water pump and that this is a very simple and quick job to do. So my question is do I need to remove the clutch cover? do I need to remove...

Hey! My water pump still leaks cooland after i replaced the head gasket, the foot gasket and everything from the water pump. I got a 570 FE from 09 and it leaks coolant since 50hrs and now im at 70.. Anybody help?

Hey guys :cheers: i have a big problem with my Husaberg FE 570 2009. My Husa leaks coolant from that little hole at the water pump cover. I tried a new 2.0 bar cover for the radiator... but it didnt help. I changed the water pump seals... didnt help. I cant find the damn problem :/ hope you...

Hi Guys! Finally the weather was kind enough to let me go out and ride for a while :). After coming back I removed the radiator cap and a black foamy substance(dont want to sound like CSI)was floating on the coolant! Not much, I practicaly removed it with a paper tissue, but I'm really worried...

Hi from Down Unber Heard alot of discussion down under about getting airboxed full of water becasue of gaps around the under side of the rear guard and the side panels .... It seems that the general opinion that the shape of ther air box lets water run downthe face of the airbox through the...

hi all just rebuilding my 2008 450 with the help of taff . thanks mate left on my own putting the water pump pin in i dropped the pin and it dissappeard in to the water jacket and pin is made from ss steel so magnet would get it out any ideas ?

hi guys.i bought my first berg a few wks ago.550fe 2007.but the coolant is coming out the weep hole so i bought the o ring,seal,gasket and bearing.i took all apart today and im havin difficulty getting sorted.can any one tel me exactly watvto do.i have the new bearing in the cover an its sitting...

KTM 640 Superduke that runs on water (Hydrogengas) No more gasoline :D http://www.youtube.com/watch?v=cg0XiApLPew

Why would my 550 blow the radiator hose off of the water pump housing? the first time was when I didnt get a full kick in on it I accidentally gave it a lil gas when kicking it, this resulted in me nearly getting thrown over the handle bars and the radiator hose? getting blown off the water pump...

Does anyone know if there is a high flow pump available for the 570? The plastic impeller is cooked on mine and I would like to replace it with an aluminum one like Slavens sells for the 2 strokes.

I'm doing my regular maintenance on my 2005 fs650e. I have always installed the water pump seal with the spring on the inside. I have never had any leaking problems. I read somewhere that the spring on the seal should be facing the impeller. Just wondering how everybody else installes them...

Has anyone with the TE250 or TE300 encountered any issues with water crossings? The air intake looks mighty low and not very well protected.... I've ordered a 250 and am slightly concerned by this - my FE550 plows through rivers!

First time out on my 07 450. Went through a little puddle and had to get towed back home. Not cool. Air filter was soaked. Do i need to drain the carb now?? Anybody else have this water issue? Looks like i'll have to seal the area under the seat. Really not that big of a puddle.... 25ft...

Hi There, Sorry for the stupid question but I am mildly confused on this one, I have changed many a seal on the KTM RFS engines no problem and figured this was the same, hoping you guys can help me out a little? I did search forum first but not quite getting it. I have a 2010 FE450(and one of...

Hi all, I went to the peak district for some green laning on Sunday (awesome by the way, and well worth a few hours drive for anyone that's nearby), and after about 4 hours of riding the bike cut out. I left it for 15 minutes and it started up ok, so carried on, half an hour later same thing...

Hi everyone. I am new here as I have recently purchased my first Husaberg, and am loving every minute of it.... Well, I took a bit of a spill in all my exuberation. I hit water the pump intake tube on a rock. Promptly my coolant started spraying out. After 5 seconds of stupidly :shock...

I have a 2005 FE550 and it has just started leaking a fair bit of coolant from the weephole. I've ordered a kit from Orangeberg and also replacment o-rings/gaskets for the other bits/pieces and hope to do the work to replace the parts in the next week or so. Just waiting now on Australia Post...

Ive just started losing a little water every time Ive been riding its been very warm and i usually lose about a cup full every time i ride I'm thinking its the radiator cap, but any other opinions would be greatly received cheers

i was in my first hare scramble yesterday and fell in a creek bottom. it looked like the hieght of the water may not have gone in the air box but i think abunch of water went in the exhaust. the bike did start after some cranking, turned over right away so it wasen't hydro locked. i did not...

The stock water pump seal failed on my bike at 3k miles. It's never been ridden in the dirt and the shaft was found to be grooved, so a new seal didn't fix it. Found Kawasaki part # 92049-0104 seal will fit and is 1mm deeper, moving the sealing area away from the damaged area on the shaft...