switch

Gonna buy a map switch for my '09 Berg FE570. Is there anything wrong with the OEM Husaberg version? I can get one pretty cheaply. BBB.

I've got a new one in the bag (never used) that I recently received from the recall. Of course it meters correctly. $50 Paypal to your door.

I took the my 6 week old 2010 FE450 out this weekend and ran into a problem with the headlight switch. Basically, it broke. The three-way switch wouldn't move and, when forced, something (maybe a spring) shot out and hit me in the chest. Now the switch just flops around and doesn't engage in any...

Hi Guys, I was wondering if anyone had tried the Husaberg tripmaster switch Part # 548.14.073.000 on their 2009-2011 FE. I got one the other day, and while it seems simple enough to plug in electrically, I cannot figure out where I'm supposed to mount the damn thing! I might just return it...

All, For everyone who has bought a 70 Degree Racing Map switch I have a bit of some what embarrassing news. There was a bit of a mix up when we originally went into production on the map switch our manufacturer produced the switches correctly. However, we got some miss information that the...

Anyone have any feedback for me on a map switch for the 390? I heard it makes a difference on the larger engines but not much on the 390.

Hi All, To enable the 3 different mapping options on a 390 Berg is it just a matter of fitting one of the mapping switches ?

Hi, I recently got a 2003 fe400e dualsport.The headlight only works on the high beam. I checked the wiring and it appears to have a broken wire between the switch and the junction connector on the steering head. Of course the connection at the switch is buried under the other wires there so it...

Any input on whether the connections made in a map switch installation are complicated by (my ignorance) the additional electronics on the street legal 570????? KA

I crushed my map switch ( dont ask how) and would like to set the bike to the agressive setting and leave it there. I was told I could add a resistor to the plug and achieve this BUT I read in the MXA test of the FX-450 that the different settings can be accessed by removing the wire or wires...

i recently purchased a 1992 350 the kill switch didn't work when i got it and after fiddling around with the wiring i have been unable to figure out how to get it to work i know the switch itself works but it is only plugged into one wire i tried grounding this wire out to the fork and the bike...

Bought the Husaberg mapping switch. Is this just a 'plug and play' switch to access the 3 settings or does the dealer have to 'flash' the 3 settings into the EFI before installing the switch. Not sure what my dealer has done and I'm getting little support from them.

Hey Guys, Just bought a very nice used 10' 390 and I'm new to this forum. The original owner put softer front and rear springs on it and gave me the OEM's which I want to switch out. The rear seems easy but what about the front? What's the process/steps and do I need any special tools...

I'm a new owner of a 2009 FE450 as of last week. I just finished up break-in and I love this bike. This is a new bike for me, though, so I'm still getting to know it. The dealer installed the EFI map switch and loaded the latest maps before I picked it up. Can anyone tell me which map switch...

Not sure if anyone has posted this over here...I had posted this on another forum and received a good response. I think AUS models get a different switch but here in the states our multi switch comes with the kill and horn switch facing away from the rider. Placing it in a place that is hard to...

Greetings all, 70 Degree Racing is happy to announce the introduction of our on the fly engine map switch!!!!! This switch is fully compatible with the stock lighting multi switch, and offers an on the fly adjustable map switch, with a much easier to use kill switch than the stock lighting...

I am making my own Map Switch as the Husaberg Map Switch is just too hard to change when you are at the bottom of a nasty hill and all your mates are shaking their heads while you are pulling your gloves off and trying to get to the switch. What could Husaberg have been thinking when they gave...

I just bought a KTM switch for my '09 FE570. The switch includes a blue horn button, high beam, lowbeam and red engine kill button. It plugs straight into the factory harness and works great except the kill swith doesn't work. I was hoping I could remove the stock engine kill switch and replace...

I found some links by LeFrog I believe. Anyone done this with sucsess? Part numbers for the switch as it is a 1/8" NPT thread? This looks like the cleanest fix if you don't have a threaded radiator plug,( pre 06?). http://www.egauges.com/vdo_acce.asp?Subgroup=Hose_Adaptors...

Hey guys, Hopefully this the right place to post this. I've been working with Paul over at Highway Dirt Bikes to come up with a cool way to mount the MAP switch for our beloved Bergs. This is of course if you are running the HDB setup. Here's the first working prototype. If is very easy...