switch

can any electrical guru explain to me the wiring (slowly),,,want to install two wire with override the stock thermostat... ty webfoot

I was going through my electricals tidying things around the batter box on my 2010 FE390 when I ran into a 2-conductor connector that is called "X51 Resistor", "A7" in the manual circuit descriptions. It has a white w/blue stripe wire & a black/blue wire leading to it. The other side of the...

Hi to all! Just a quick few words. I had 450 sxf, bondi did performance mods. It was raced then I bought it. Turned it into woods trail bike. Put in heavy flywheel. Slowed it down with sprockets. Put in enduro piston. Was still the most expensive power compared to all the bikes in our group...

I am going to disconect the ignitoin Switch on my 650 ,2002 FE . Can anybody tell me what wire are going to connect with who and whitch one I can just disconect to make it work? Brown Orange White/Red Black/Red Thanks Thomas

wanted switch and indicator gear for husaberg 650 s supermoto or any ideas how to get a kit thanks all

hi can I fit an ignition switch to my 650 supermoto for added security at the moment you can just jump on it and ride or any other ideas for immobilising it

Hi folks, does anyone happen to know the thread size for the fan switch in the radiator of a fs650? looked all over but can't find out.... I've got fan etc but just need the thermo switch then i can fit..... Thanks, Phil.:)

I need to add a brake light switch for my front brake to satisfy the local dmv. I have one of tusk universal switches. I need some help on how to wire it in. Is the harness already present or do I need to splice it to the existing on for the rear brake.

Hi guys. I wonder if some1 can help me. I have seen a 2003 husaberg 501 forsale on ebay that has a map switch. I have a 2004 501 but mine doesn't have one. Is this something I can fit to my bike? If so can any1 tell me where to get one. Thank you.

Hi, I am trying to solve a small problem with my FE350 and want to try the "slow" map however I am a little confused: the vid on slavens racing shows a two wire connector (black and grey) under the tank but some on the forum here say its a two wire sealed connector behind the headlight but the...

Hi after anyone that has the indicator switch with the cable that sits under the light/horn assembly, its for a 2011 Fe thanks

I even laughed at myself finding this out, I wont blame anyone doing the same. Bought the 570 from a dealer so I never got to speak with the owner, deal included a map-switch. Back in the garage prepping the bike I could not find the switch connector, asked around and nope not there! (still...

Hello, Just installed a horn on the bike (it came stock with one, but the previous owner removed a bunch of stuff, including the horn). After wiring up the new horn, I tried to test it. It let out some faint whines... then nothing. I checked the handlebar switch with a multimeter... turns...

Hey guys I've been rebuilding a fe650 over the last few years and it's almost ready to start up, except one thing. There are 4 wires that plug into the ignition switch that I cannot find a diagram for. The switch is marked 1,2,3,4 and the wires are YL/RD, RD, OR, BR Anyone able to help out...

So I found the wires that connect to the MAP switch and although I do have the MAP switch itself, the connector that plugs into the switch it gone. So I have two wires and no means to plug them into the MAP switch. Anyone know where I can get a connector to connect to the wires and plug into...

Hi all, I've been thinking about slowing down a potential thief with a hidden 'kill' switch. Either a rocker switch or one of them tether kill switches. Question is, do I wire it up to the oem kill switch or to the oem start button? Thoughts?

Hi All, I just wondered if you could help, I have purchashed the switch below to improve on the very poor standard cv indicator/light switch that broke first time out! I have wired up and the lights and indicators to the new switch which work great :)...

Hello, My '05 berg doesn't have an ignition module (in terms of a key to turn). I could buy one for about $25-30, but there are relatively heavy and unsightly. Instead of a key, I plan to install an on-off switch somewhere on the bike to prevent somebody from climbing on and hitting START...

Hey all, Been lurking around here for a while and just about to go after a FE570. There are a number for sale here in Aus some with and some without the three setting map switch Im just after some feedback as to whether they are of use or not. would like to here from those who do and...

Does anyone know how to fix the lighting switch on a 2011 FE390? The kill switch still works. Alternatively, how do you wire up a Sicass (I think that's what I have) universal switch? It only has three wires (white, black and blue) instead of 4 (white, blue, green, brown) in the stock...