switch

2010 fs570 i commute in 35 degree plus heat (peak hour traffic), so i fitted the fan kit, that thermo switch kicks in way too late i reckon. does anyone know if there is a switch available with a lower threshold temperature?

I've seen allot of discussion here and other web sites about the mapping switch. Some are at a difference of how it works. My question is: If the bike has the dealer installed competition map and no map switch is it in the more Agressive mode, (the same as with the switch and set to the...

installed a map switch from 70 degree racing.. at first i thought it wasnt working because there is so little difference between soft and agressive modes. however; when putting around fire trails in 2nd gear like i love to do at about 3000 rpm, i noted the agressive map the bike is jerky when...

09 570.3 of the wires on my handlebar hi/lo switch have come loose,which i have no headlight now.They are the white wire,the yellow wire and the yellow with green stripe.where the wires are missing from are numbered 1,3 and 6.Im not sure which wire goes where and cannot find any wiring diagrams...

hey guys, earlier this year i have installed a "enduro lighting kit dual sport kit" on my berg, i have a hid headlight that was not part of the kit, front and rear led signals, led brake/running light and the factory horn, basically the kit i have is the cheapest kit available that i know of and...

I'm just trying to fit one of these but a few observations first. 2011 450FE 1. I thought these came with an underseat map switch as standard? 2. I ordered the bike with a handle bar switch and was disappointed to find the silly 11 position thing. 3. Disappointed at being charged for a useless...

Hi all, Today I arrived in sunny Wales with my Husaberg (and a car load of tools and spares), in preparation for 3 days exploring the local lanes. All was good until I went to start it, only to find the key wasn't in the ignition! Having looked at the wiring diagram of the ignition switch, I...

Does the map switch work for the 09's ?

I have the 10 position mapping switch fitted (3 settings). This is a bit of a fiddle to use so I was thinking of installing the trailtech thumb operated version. My question is do you need to turn the bike off inbetween for the different maps to take effect ? There seems little point in fitting...

I'm curious about the ignition map switch that Trail Tech sells. http://www.trailtech.net/040-HMS-A5C.html Does anyone have experience with this part on a Husaberg?

The new map selector switch is available from KTM hardparts. http://www.ktm-parts.com/77239974000.html It looks it will fit Husaberg as well. http://www.ktm-parts.com/mm5/graphics/0 ... 974044.pdf It is a combination of the old one switch with more compact one mounted on the handlebar. The...

Finally got my map switch from 70 degree racing Unfortunately, the online instructions are for a bike that has different wiring than my FE570S and not getting much help from company Anyone out there install one on a 570S and willing to pass along some tips?

I just got a sicassracing keyed ignition switch for my 09 fe570. its this one http://sicassracing.com/store/index.php ... cts_id=313 anyway- i cant find anywhere on the harness when a 4 pin plug with go in- something may be hiding , any ideas?

I know this type of topic has been discussed over and over, but after searching all the threads I could find I don´t have a good answer for what follows: Just got my 570 about 2 weeks ago. It does not have the power I expected (my KDX200 has more grunt and topend) and seems to be running a bit...

Does the mapping switch control both the ignition and the FI systems or just the ingnition system?

Hello me and a buddy just bought two 10 Fx 450s.. we are unsure what do do about the map switch and even all the benifits with getting the map switch.. we are looking at the 70deg switch.. so from factory is the bike set at a less aggressive torque curve than the high setting on the switch from...

Hi all, best map to use on the 2011 fe390, and once i do a map reflash (at dealer) does the map switch still work or is the switch made for the default map / programing? Thanks, Dave

I read someone mounted their map switch on the HDB top clamp. Unfortunately I cannot remember where. Anyone else read this and can you remember where?

Does my 2010 FE570 have a map switch? I don't see it anywhere. Do Ihave to buy the KTM parts or 70 deg switch to change maps or is there another way? I noticed a lot of rear wheel slip when on single track on my first ride the other day.

I grabbed this key replacement in hopes I could use it on my 2010 fe... anyone wire one of these up yet? How's you go about doing it? http://sicassracing.com/store/index.php ... cts_id=313