switch

does anyhone have a tripmaster switch in UK they would be willing to lend me ? I only want one so I can adjust the wheel size on the speedo, I have 19" wheels on the flat track you see so the speedo is out. then ill send it back. ill pay full retail price to you then once you have it back in...

I am sorting out the new to me 2009 Fe450 that I picked up a few weeks ago. This bike is titled for the street but the original owner never used it as a street bike so the street legal bits were never really sorted out. I have determined that the bike has the switch block from the 2010 model...

Hi all, I had a run in with a tree today while riding through some ST. Nothing major, but it broke the high/low/off switch for my headlights (KTM part 50311070000). I'd like to replace it with something a little more rugged, and I really don't need the indicator, horn or kill switch. Highway...

Hi everyone, Looking to install a hidden kill switch on my 08 Fe450. Is there any harm in splicing a toggle switch between the oem kill switch wire and grounding it... (kind of like a redundant kill switch that would be permanently grounded until the circuit is broken manually) OR...

I have 99 fc 501 i think its wired for lights but i can't be sure its got a switch for lights hanging down from a like 5/6 spot wire harness that bolted to the frame but the bike it self has no lights if some one.could tell me what. lights would fit it or if its worth tring to plate is it even...

I have found this nice little switch on my handle bars and after many hours of internet searching i have found out its a map switch its small and black and has 11 different positions. Now I am just having a little trouble understanding which setting is what. As I have stripped the bike and...

Hey everyone Iam in the process of adding a dual sport kit onto my old 97 fc510e. My hold up is what to use for brake light switches ? What do you guys normally use ? Thank you

I am wanting to have my 2010 FX450 running in the most aggressive MAP setting and have considered buying the adjustable map switch to do so, but then I heard that this bike comes from the factory already in the "aggressive" setting. If this is the case, I'm assuming the switch would be a waste...

The kill switch on my 390 is dead again. I replaced the unit last year while under warranty but now I need a better solution. I was thinking about wiring in an after market kill switch. My only problem is that I can't find a wiring diagram for the 390. Can anyone help me with what colour wire...

Hey all, don't know if its been done before but here it is- Its a controller knob from an electronics store super glued to the stock numbered dial on the stock mapswitch. It was a "meant to be" kinda fit, and the dials should be universally available. The rubber housing has been cut to allow...

Hi, I need to replace the front brake switch on my berg and think that I would prefer to go down the path of the banjo bolt style switch instead of the fiddly little electrical switch under the lever (gets caked in mud and ceases all the time). Is there any reason not to make this change...

My FE570 is the Aus version that has no ignition switch. I bought a KTM 78011065100 switch as recommended on the Advrider forum. I cannot see the female 4 pin plug to connect to. How do you wire the switch up?

After looking over the new 2013 Berg (KTM), I noticed they installed a nice rubber cover over the fan switch in the rad covering those two ugly and exposed connectors. It should fit my '09 FE450. Anyone have a part number for this thing? Thanks

Hello. Just picked up a 2011 FE570. It has a 70 Degrees mapswitch fitted. Do I have to stop the engine then change settings or do they change on the fly...???? Thanks

I have a 2009 fe570 that I run soley as a snowbike. Did the 09's have a Map switch from the factory. I plan on using the aggresive map as well as an FMF 4.1 muffler and just leave it there.

Hi does anyone know where I can get a 90'C thermo plug for the radiator fan in Australia? I looked at the ones in the states but they want around $25 just for postage pfffft.

Can anyone tell me if the tripmaster switch (three wires/buttons) will work on a recent KTM exc type speedo - I dont know what speedos were on the earlier Berg enduro bikes. Thanks Mike

Hey all on the stock rotary dial mapping switch what is what ?! I'm also looking at a sliding switch replacement and am too tight arse to fork out $80 Odd dollars on a trailtech one that will most likely seize. Does anyone have a wiring diagram for a sliding switch and which switch to use ...

Ok I am new to the Husaberg 2 stroke world, just sold my honda 450r and bought a 2012 te250(USA), and I have an easy question: On the ignition mapping switch, what is "I", and what is "II"? I understand that one setting is smooth, and the other is aggressive, but which one is which? TX...

So from what. Have been reading the tripmaster switch can control the speedo. I have an 03 fe400 and the speedo has no buttons etc. Am I right in thinking that the tripmaster switch can be added and then open up all the functions avaliable. I want to change the wheel size as I am fitting some...