Not been riding my bike as much as I would like I've been really busy at work, but I've still been training very hard, well imagine my disbelief when out riding an extreme course I got arm pump so bad I couldn't hold on, is this normal?????
I have a 2010 FE570 with just over 30 hrs on it. I've owned it for about 5 of those hrs. Today I noticed a few drops of water escaping from under the water pump, hard to see but I'm assuming there's a weep hole there. I heard rumor this is common?! Should I keep riding until it pisses out faster...
This problem of my bike starting then stopping continues I’ve now taken the fuel pump out of my bike checked the filters ....they’re fine and the connections, plugged it back in, pressed the starter and no sound from the fuel pump, my bike has 100 hours I’ve checked the fuses battery leads...
I'm referencing clbuff's post in "Vapor lock on 2010 390" What other bikes that KTM produces use Chinese fuel pumps?? Does anybody know?? Has anybody else seem the Made In China stamp on their Husaberg fuel pumps?
I have seen on SM bikes engine protectors/covers for the water pump and for the clutch cover (where the gear lever is)...
Where can i get them and are they really good ?
Thanks
Georgios
A little more water pump seal information
My 2010 570 started to loose a little coolant about 50cc after about 5months and 3700miles, just been adding coolant after every ride, I kept telling my self I didn’t have time to fix it, so today I installed the seals . Takes about an hour. Should...
Hi Guys,
09 FE450. When I put the trickle charger on the bike (engine off) the fuel pump cycles on and off and the efi light comes on. Any ideas?
thanks.
Aaron
Hi everyone, I had the waterp pump seals and bearing replaced by the dealer when they did the warranty cam. Now after 4 hours it leaks again, when I say leak it was more of an eruption. I was out by myself hitting a spot near town, when I turned back on to the highway I short shifted into 6th...
All,
Well after 100 hours the water pump seal started dribbling out the weep hole. I got the parts to replace it, clutch cover gasket, seals, pump housing gasket etc.
The new seals do not have the metallic outer that the previous generation had, and the oil seal has little spacers on it to...
I got my new BERG 390 and the first ride after one hour of use the bike stalls and didn't want to run.. At that time I was using a AKRA slip on and I was told that the 390 was not accepting any exhaust till I get the reflash mapping thing in the ECU, so I thought that was the problem..
After...
Hey guys,
I'm looking to simplify this by making a list of "must change" and "should change" parts for the famous "weep hole leak" be it oil or just coolant.
KISS (Keep It Simple Stupid)
Trying to make this easier for FNG's like me (Freakin' New Guy).
I need to do the fix ASAP since my baby...
I have a 'new to me' 08' Husaberg FE 550 with 14.5 hrs on it. It appears to be 'weeping' oil out of what looks like the water pump weep hole. This tells me that my water pump seals might be gone. :(
That being said, what is the cross reference to KTM odel (if it is; 530?) for the water...
I have my bike for a few months and today i was fiddling around the carb and noticed that my Dellorto PHM doesn't have accelerator pump. I talked to the local bike mechanic that rode Husaberg some time ago and he had a couple of similar Dellortos laying in garage and they all have accelerator...
Went riding in the mountains yesterday and after 1hour riding my Berg dies and when i touch the starter to get the fuel pump running it didn´t .We took the tank of and took a look at the fuse and it was OK and also the plug for the gas tank.Than after a while the bike fired up and did run for...
Hi, have any members tried or are using the R&D Power Pump 2 Accelerator Pump Cover if so does it improve the bottom end response and or does it aid reducing the occasional hot stall i experience, i'm riding a 2004 fe 550 trail riding thanx..........colin
I have just fitted the new improved MkII water pump kit from ORANGEBERG. The new kit has a larger bearing. The bearing in my MkI kit collapsed after many hours and coolant started to leak out the weep hole. I can't remember how many hours I did on the MkI kit before the bearing failed, but it...
I had to replace my water pump seal and now I'm not sure if I put the new one in the right way. (Installed it the same as what I took out though...) Still leaking from the weep hole now.
The old one was installed with the "open" side of the seal facing away from the water pump impeller. I...
05 FS 450C Bike has been making some louder than normal noise, so I check the valves. Little tight, I adjust and fine. try the bike and it is still loud. check to see if the main nut backed off and water pump pin was broken in 3 pieces. slight damage to the propeller.
What could have...