pump

Has anyone ever thought about adding an electrical oil pump and reservoir/cooler to 1st gen engines to increase oil capacity and oil circulation? Scavenge pumps can be had that run at about 40watts, electrically, the bike should be able to run it just fine. Is this a totally stupid and...

HI, My Berg is leaking coolant out of the weep hole. I have read lots about the Orangeberg seal kit, with everyone saying they work awesome. Could someone please tell me how to get my hands on one. Thanks

Hi all, After fitting Orangebergs seal kit and a new water pump seal everything is fine, weep hole dry as a bone, well worth the money. The reason it was leaking coolant wasn't a worn seal but a groove worn in the shaft due to the seal, I have managed to refit the new seal 1.5mm further in...

I ride a '06 fe550 and always suffer from throttle arm pump while warming up, so bad I can hardly hold on. I'm a good rider and always lift weights to keep in shape. I've heard it all like: Avoid alcohol the night before, Drink lots of water, take aspirine.Then I wonder if my stock 14/48...

My first post, and I've just ordered my first Berg, an 08 F 550, it's not here yet, next week I hope. I've been lurking here the last couple of weeks and have learned much about the bikes, great forum and community. A quick question about the water pump seal leak, is it still a problem on the...

Anybody know when the oil-pump started being used? I've just bought a 97 FE600E (pickup tomorrow) and just trying to find out as much info as I can on this model before I pick it up. The only thing I have been able to ascertain is that 96-97 was a transition year. Anyone able to shed some...

Hi guys, I was after a dimension of the water pump impeller if anyone was able to help me out. The dimension I am after is the depth of the shaft boss (i.e. length of the surface which bears against the shaft). My impeller is able to float a couple of mm's on the shaft before being...

Hi all, Having replaced the pump seal about 5 or 6 hundred miles ago it has started to weep coolant from the weep hole. I have removed the pump impeller, no play in the shaft and the seal is still nice an supple, and on installation protected the shaft end so as not to damage the seal flange...

While in the process of jetting the FCR carb on my '08 KTM 250 XCF-W, I noticed that the AP squirt is decidedly off center, i.e. squirts noticeably to the right. I would guess that the squirt would hit the right side of the intake port within inches of entrance. Can the AP squirt direction be...

.... cant remember the bloody name and cant be bothered to look it up. anyway, turn your fcr upside down and you have the bottom cover for the squirty thing with 3 screws holding it on. has anyone had the o-ring seal go in this? i ask because my bikes been in the shop for weeks cos it...

just purchased an 04 550 fe, on my first ride l noticed some oil running down the crank case just in front of the water pump housing. there is a small hole in the housing which l presume is for this, but being my first berg i just want to be sure. any help would be appreciated.

Hi Would any of you guys out there no the setup for a Mikuni TM40 pump carb for a 1995 Berg fc600. Have just aquired the new carb but when attached to the engine causes back fire through the carb. i know that this relates to fuel starvation as when I attach the old Dellorto the engine runs...

Hello bergers around the world , I wonder if aftermarket accelarator pump cover for FCR can improve performance of engine and works nice generally.I tried to fit one of them but when I install it in my 07 FS650e doesnt work.The engine increases RPM difficult and doesnt work properly.I...

I have water oil mix coming from hole next to water pump, my water and oil are both fine not mixed. only trickling out, only just started! any ideas please.05 fs650c

anyone help? my fs650e water pump is dripping tiny amounts of coolant from what appears to be a deliberate hole at the base of the water pump ive had this in a car before and the pump went a few weeks later,the bikes only losing a small bit of water if any!Anyone had this???????

Anyone give me a heads up on why I have oil leaking from the water pump all down the casing. Looks like its comming from the small hole on the pump. This is my third ride on it and I only noticed it today. Its a FE 550 07 model. Got about 200 kays on it now.

Hi Bergers, Thought I'd start another thread on this, although there ar already numerous ones on UHE already. As I guess many of you are aware already if you have been reading http://www.husaberg.org/index.php?name= ... torder=asc I have had a few issues with WP leaks and others on my 07 650...

Took me ages to craft this baby. I'm thinking of starting up a business making them. Should be able to offer them up for less than $200 (AUD). To give me some idea of market strength, please tell me how much you want one.

I noticed a water leak from the weep hole, when I popped the side cover off to replace the seal and o-ring I noticed that the shaft was worn. http://www.husaberg.org/index.php?set_a ... _photo.php Is this something that warrants replacement or install new seal and leave as is? Also...

Hey all It has been too long since I too my bad water pump seal out and wanted to ask what way the new one goes back in, I have the water pump cover off, impeller out seal ready to go in and I can't remember if it goes in flat side out or in, must need some beer because this working on...