clutch

Hello all... I was going through all the stuff I got when I purchased my berg and I came across a clutch slave Guard. I own a 2011 fe570 My clutch slave guard has 3 holes not 2 holes... I am confuse:confused: on which berg this fits? any info will be greatly appreciated :)

hello to all!i manage to pull out the clutch basket and pull out and the thrust bearing with push rod and put it back to place.now in the other side of the clutch push rod when i pull it out was something part on it or not and i do a stupidity and i must remove all the hydralic system in the the...

Whats up. I was going to change my engagement bracket was bent and couldnt kickstart it. Then when im trying to put the bike back together, clutch bracket-hub-discs-and bolts with springs the bike wont clutch anymore, any ideas? one desperet dude who wants to go out and ride :p

My FE570, Magura clutch, still creeps with the clutch pulled in. When I burp the throttle or put on brake, the clutch comes loose. As soon as I pump the trottle or put on brake I can feel the clutch totally disengage. Otherwise, it just barely still creeps forward. I've tried bleeding...

Where can I find clutch lever with attached mineral oil box for 2000 Husaberg fc501? Thank you

Hell all, owner of a 1998 FC 501. Anyways, I disassembled the left side engine to fix some sticky shifting issues and ended up removing the clutch basket (damn kick start shaft popped out) and after reassembly, clutch is "sloppy". As in, both my cable adjustments are bottomed out and clutch is...

Hi all it's time to replace my clutch on my 2010 FE450 as it seems to be dragging and I wanted some recommendations. Has anyone used the Tusk clutch kit with friction plates, steels, and spring with any success? It's a bargain at about $60 but am I better off going oem? I have over 200 hours on...

New old member, with a new old FE600:) It`s a 2000 m/y, with very little known history, but works just fine. Well, almost... The clutch is dragging ever so slightly; not enough for the bike to creep forward, but it certainly puts up a fight if I try to pull the bike rearwards (first gear...

Hello I am looking for a Husaberg clutch cover (blue) for my 2011 Husaberg fe570s Thanks -DaBergman

Hi All I have looked into the hydraulic mineral oil used for the Megura clutch. Based upon information from various manufacturers and their safety data sheets, the oil is ISO10 and ISO15 hydraulic oil. The viscosity index, viscosity grade at temperature, flash point ands density all match...

Hello all, Last week I found myself without any clutch. It seems that the master cylinder was leaking, so a rebuild kit solved that problem. But the problem wasn't over, so I brought the bike over to the dealership. They installed a new slave cylinder and the clutch was working correctly...

Anyone know a link to fitting instructions for 02-08 Force Parts slipper clutch? Mine's off and almost ready to refit - just want to make sure I get it right! Cheers.

delete delete

Tackled the good old water pump shaft seal yesterday (milky oil:mad:). After reading many threads on here about it to prepare, I thought it had gone pretty well - until I found I'd fallen in to the "kick start trap"! So while removing the clutch (force parts slipper) I noticed 1 thread was...

I was looking for some stock clutch parts to replace a Z Start Pro. If you are looking to get rid of your stock clutch please contact me. [email protected] :D

Other than OEM any options? Only used as a trail bike so breaks my heart looking at the price of the OEM fibers. If anybody has codes of a Ebc or other model that should work, I was guessing Ktm ones should fit?

Hi! Bike: 2007 FS650-e supermotard When the season ended here in Norway:cold: I decided to open the clutch cover to check if some parts needed to be replaced, as there had been some whining-noises while riding. There had also been a high-pitched noise while accelrating fast from a complete...

Anyone ever had the clutch cover on a 501 2003 stuck on by the viewing window? Got all the bolts out and it's all loose except for round the viewing window. I'm close to getting it off with a club hammer. Tia

hey everyone, was wondering if it is possible to replace my whole magura clutch system(master and slave cylinder) with a brembo system on my 2011 fs 570? Im tired of the magura leaking and not working properly and the brembo system on my KTM has had no problems so i would just like to switch to...

I own a 2008 Husaberg FE550. It comes stock with a Magura Hydralic Clutch. I Recently broke the piece that mounts on the handle bar and holds the clutch lever, decompression lever and reservoir. KTM Part number 59002030100 is the entire clutch cylinder and costs alot (over $250). I only need...