clutch

Hi guys, I've recently had to replace my hydraulic clutch pipe and was now in the process of filling the clutch system again with hydraulic fluid. As soon as I fill it up from the bottom, all the fluid in the master cylinder disappears and enters the engine. I had to open the oil drain plug...

Hi all when engaging 1st and slipping the clutch to set off, it's not smooth. It's like the initial bite of the clutch is a grab which lurches you forward. Any ideas?

Is anyone using a Rekluse slave on a manual clutch? I am thinking of replacing the Magura single o-ring slave I have for a double o-ring Rekluse slave. However, I'm wondering what complications the "adjustability" of the Rekluse slave adds to this issue, if any at all. I can't find any info...

OEM Magura clutch unit in my FE390. Master leaked. Replaced piston with OEM repair kit. Topped up with mineral oil. Bled. Still leaks. How can I tell if it is the Slave O ring problem, or a bad master cylinder bore? There's lots out there on this, but I am thoroughly confused and...

First problem, a little bit sweaty. This fixed it, I could wear this for cologne. Its done some sand work, sand everywhere! Any bets on how long the slave lasts? Threw a 14t front sprocket on while there, the old sprocket has 21 hrs on it! They work like a fuse. 14t should...

I have had the berg for a year. Love it, but it came with a slight drip that manifested itself on the bolt of the clutch leaver. Traced it to the master cylinder where the plunger/piston enters. Replaced the plunger after cleaning all parts. To the eye, the bore looked good on the MC...

hello friends im looking for some new short sexy levers for my old husaberg. its got brembo brake, i wonder if ktm levers wil fit? Does anyone know where i can find some? both for clutch and front brake. found these on ebay: Orange CNC Pivot Brake Clutch Levers for KTM 450XCR w EXC EXC R 2005...

I am replacing the clutch master cylinder piston with the OEM repair kit. Have the kit, but I notice on the master cylinder has a small hole where it looks like a spring should sit. I don't remember one being there. I have photographed the hole (at the 6 oclock position on the master cylinder)...

Hey guys, This is my first post here, and english is not my first language, so bare with me on some terms heheh I have a 2009 FE 450 which i love, however it's been weird lately. I live in a very hot tropical country (Brazil) and everytime, when im riding after 15-20 minutes in 90ºF...

I have a 2011 FE 570S. I lost the clutch action recently and discovered that the oil level was low in the reservoir. I have refilled it about three or four times, but cannot figure out where the leak is. I'm not picking up much dust on the reservoir.The cap rubber looks intact. Today I pulled...

Hy! Why is it that the engine is cold the clutch works perfectly, but when the engine is hot it is as if the clutch out a little would be released during the alredy pulled ... KORNEL

I have a 00 FE501-E that broken a tooth off the kick starter idler gear and it's taken out the clutch basket gear in the process. I can't seem to get a clear understanding of what is/isn't interchangeable so I'm looking for some guidance. The idler gear seems pretty simple and interchanges up to...

Brand new Magura Clutch Master Cylinder-9.5mm KTM/Husaberg Part#50302030300 Includes break away lever. Fits many KTM and Husaberg models. Retail price is $323.99 Asking $175 or best offer with free shipping in the United States. PM or EMAIL

Hello everyone I'm new here and not really strong at English I have a Husaberg fe 390 2010 And have a clutch problem when I log into first gear clutch is not so good and the bike separates retrograde forward with you to help even have a video I would be very happy Thank you all and sorry...

Hi all, I just put in a new output cylinder for the clutch due to a hairline crack in the cylinder cover, I put in all new cylinder, o'rings, cover and bleeder nipple. I have tried to bleed the clutch by removing the bleeder nipple and using a syringe to fill and push the air back through the...

I am having a hard time finding a sprag clutch for my 95 husaberg fe501. Anyone have any ideas of where i can get one? I have searched everywhere and am having no luck. Im beating the hell out of myself trying to kick start it so really need to get her fixed. Thank you in advance!!!

hey guys, i was wondering if any one could point me in the right direction. im looking for a clutch kit (steels, fibers and springs) for a 2000 husaberg fe600e. i cant seam to find any, the 2004 and up comes up but nothing for my 2000. Im guessing the clutches aren't the same. can anyone point...

My '07 FE550 came with a Rekluse; I am looking for a complete manual clutch for it. Thanks.

hey, new too both the forum and bikes , havent been riding for ten years, last one i owned was a moped so alot has changed since then :-P so here is my problem, i cant get my clutch to work, i have put new wear plates in it , new oil, backbled it , no clutch, I can pull the lever and...

Did the 06 fe650e have an issue with the starter clutch because mine sure does. I've owned it for about a year and had all new starter clutch parts put in. It worked pretty good for awhile and got progressively worse until it doesn't engage at all. Is there anything that will solve this...