clutch

Hi guys, the outer clutch cover on my 09 has started to leak again. I replaced the rubber gasket once already and it sealed up nice for about 70 hours but its starting to weap again. Not bad just enough to collect dust but it will drive me nuts, I hate leaks. Anyone seen this before? Could the...

Hey everyone I have a 97 fe501e. Iam going to be needing a clutch soon. Iam most likely going to pick up taffys conversion kit http://cgi.ebay.com/ws/eBayISAPI.dll?Vi ... 1382763462 . Wondering were to source the fibers from ? I have searched around online and not come up with much. I probably...

I removed lockwasher and nut and the hub does not just come right off like implied in manual. how do I remove clutch hub and basket without breaking anything? any advise would be appreciated Sorry it is a 2006 fe 650

For a limited time, I am offering a free Rekluse clutch cover ($159 if purchased separately) with the purchase of an EXP clutch for your 2013 Husaberg TE 250/300. Clutch sells for $599 with free shipping and no sales tax. You must call us at 888-284-4588 and ask for Aryn.

I converted the clutch on my 01 to a left hand rear brake last winter. I used DOT 5 silicone fluid and it has worked great. Of late the brake has been acting up with the lever going from normal to spongy to rock hard. I've spent a couple evenings trying to solve the problem to no avail. Tonight...

At some point I want to into install a slipper clutch into my 02 550, I know they changed clutch and cover design for 03> I know I would need whole cover assembly water pump & main gear shaft So thinking out loud here, probably would not have to up-date cover, just clutch & gear shaft ...

Do I need a clutch holder tool to remove the stock clutch basket? Installing a slipper. Anyone know the size of the nut? Says 18mm in the parts manual but I think that is the inside diameter. Thx!

Hi All Will a Rekluse clutch that came off a 2013 fe350 fit the new 2014 fe250? I know it wont fit the 2013 fe250; but mybe the new 2014 fe250 with DDS clutch will?? plse help

I finally broke down and sprang for a STM slipper. It should arrive any day now. Does anyone have instalation tips? I found there are different springs that can be installed also. Thanks!

Hi! I noticed my clutch starts to slip more and more, but the weird thing is that the friction plates have no signs of wear at all? I'm using plutoline 10w50 nanotech as engine oil, so nothing wrong with that? its a fs 570 from 2010!

Has anyone used the 450 clutch springs in a 650? I have a spare set of 450 springs and tried them lot lighter pull. I have not run them yet as rebuilding motor. i know the 650 ones are a different part number and are .2mm thicker.

Hello! Anyone knows what options (if any) there are for shorter clutch and brake levers for the FS570? Thanks Rickard

Hi all, I'd really like to get a case cover for some added protection on my bike, something like this one from Systech Racing: Unfortunately Systech only make them for the Husaberg 2 stroke models. I've also seen carbon fibre covers but they look a bit flimsy to me, and there are a lot of...

Hi all Husky/Berg fans. After changing clutch friction plates on my 570-12 the clutch no longer works... (Before OK). I have rekluse EXP2 and of course I thought I had done something wrong but all seems to be correctly installed. The right no. of friction and steel plates (6pcs) are installed...

I own a 2010 fe450 and just bought a used low hr 2011 fx450. The fx is much harder to put into neutral than my fe. Sooo i plan to bleed the clutch than i notice it has a 9.0 magura master cylinder instead of the 9.5. I Have only rode the fx up and down the street and besides being hard to get...

Has anyone done this? If so can you tell me how to do it! I have and 11 plate FE450 Many thanks.

Hi guys. Bike in Question is my 05 FS/E 450. I've experienced a glitch to the norm "slack clutch feel" issues. I have my suspicion but, thought I'd ask first. First. From day one, Owning the bike. The bike had a lot of 'Clutch drag' I figured the Discs where close to being replaced, so lived...

Over the winter I sent the clutch out of my 01 fe650 out to Gary at EFM for an auto clutch conversion. The turnaround time was very quick and the clutch came back looking like a work of art. Instructions were clear and the instalation was very simple. I was told I may need to do some grinding on...

Hello all. I installed the Adler slipper clutch, bought out of the KTM power parts (part number: 78032000100), on my FS570. I have had many issues with it: First: the clutch was not engaging properly - slipping the other way. I checked the oil level in the MC to find out there was too much oil...

Has anyone else got issues with their rear brake lever causing excessive wear on the clutch cover. My bike is only 1500klms old but it looks like I need to replace the cover already... and no it hasn't been dropped hard on the side. :?