clutch

Howdy, I did search but it appears most threads are either never resolved or the OP never stated what correct the problem. First off, I am new to the husaberg brand and come from a Kawasaki. The first thing I noticed is that when the bike is in gear and not running, I can not roll it...

D the ktm clutch plates work for a 2006 Husaberg fe 450?

Hi! I am finishing my bike and I am about to change original clutch for Adler/Husaberg slipper clutch for my FS650 [emoji3526][emoji1317]. Do I need this part that is listed in the installation manual or can I make due with something else / similar / from other bikes ? I suppose it is just...

Help: 2011 FE390 dies once I put it in gear and try to let the clutch out. Has Rekluse Z-start Pro with new clutch pack. Have had no issues writing and starting since replacing clutch pack last year. Also has a recently replaced fuel pump. Bike was having difficulty starting. Replaced the...

Hi! I bought a new old Husaberg slipper clutch for my FS 650, but it is missing two of the four opener springs , anyone who has those or knows how to get them ? I attached picture of the spring, the parts lists and picture - #5 Opener Springs , and picture of the slipper. Thank you!:)

Black rims with Blue Anodized Hubs from DNA Racing. 18 and 21 inch diameter. Rotors still attached. $350 OBO Wheels will also likely fit other bikes. Message me for photos or I will post some soon!

not a april fools day joke, my bike fell over off the side stand and smashed the clutch cover any out there .this sucks as we are coming into spring here in Canada .Just my luck:cry::

Hi all, I'm having issues with my 2012 FE390, it's actually impossible to get it into neutral when its running even using my hand I can't do it. The bike was working fine previously but has not been used in around 12 months and i've only had the issue since then. I replaced the clutch master...

My Berg had no problems using the electric starter in Florida where the temps rarely went below 70 degrees. Now that I am in California I am now looking at starting when it is in the 50s. My Revloc clutch puts a lot of drag on the starting mechanism so now with a cold Berg the starter spins...

Good morning folks. To whom it may concern: I have produced some anodized/reinforced clutch cover made of Aluminum AW 7075. If this is the wrong place to put this up, i am sorry. https://www.motoren-israel.com/Husaberg/Eigene-Produkte/Kupplungsdeckel-Racing-eloxiert::202068.html Thanks for...

Hello guys! Got a new clutch kit from a friend of mine because my clutch started slipping at higher rpm and gears, when really flooring the bike... So there are a few things that I can't sort out... The stock steel plates seem to be exactly same thickness... But the TRW kit comes with 4...

So had a major failure on mine,problem being I’m told the engine is 2005,but it’s a 2004 bike,part numbers are different.....are these interchangeable?

So obviously the 2 are related,is there any adjustments I can make at the basket to solve this? There is a brand new slave cylinder,master cylinder operates as it should,no air in the system.....it’s as if the throw on the pushrod is just coming up short. Adjusting lever span makes no difference.

Does anybody know will Hinson clutch from 2009 KTM 450SX to my 570 Berg? I have Rekluse on my bike and i want normal clutch back. If someone know, i would really be greatful for informations.

Hey guys, My clutch is pretty heavy for the style of riding I do. Has anyone out there tried lighter springs, washer or removing springs to get a lighter feel.?? Cheers... Sent from my iPhone using Tapatalk

I need to replace the slave on my FS570, haven't dealt with a mineral oil setup before. https://www.ebay.com/itm/Magura-Brake-Bleed-Kit-with-100ml-Genuine-Magura-Royal-Blood-Fluid-Bleed-Block/132897772324?hash=item1ef1531324:g:RzwAAOSwMKxb8yza is that about what I want?

Hi Guys, Well i discovered that the strange things my clutch was doing is because the master cylinder bore has some of the anodising flaking off. This is allowing fluid to leak past the piston as well as wearing out the piston seal. Short of replacing the whole clutch master has anyone had a...

Who as a good way of bleeding 2008 clutch master cylinder. I use the syringe to push oil up and then flick lever.....ride and flick lever.....clutch works great but on examination and lever actuation small bubbles? Not bleed properly or is air getting in somewhere....clutch good nut...

Hello all! I'm new to this forum. I was givin two husaberg fe 501 ones a 2002 and I think the other is a 2000. I have a question about the 2002 it's in need of a clutch. I was givin a parts bin but the only clutch in the bin is a rev- loc does this fit the 2000 or the 2002? The 02 has a clutch...

Hello husaberg lovers! I just bought an SM 650 2008 model. When i pull inn the clutch the bike keeps going forward. In other words i have to hold in the brakes to keep it still. It's also very hard to get the bike in neutral when the motor is Running. Now i have tried to "bleed" the clutch...