chain

Has anyone installed on of these? Red Manual Cam Chain Tensioner 2001 2008 Husaberg FE650 FE650E FE 650 650E | eBay Any thoughts?

Just changed my cam chain. Three hours running. Went to a local enduro today. 3km in to the first timed section, the bike quit. Damage, one broken cam chain, two bent exhaust valves and the tensioner bolt got bent and cracked the head where the bolt goes through. The cam chain broke but not on...

Just bought/converted a 2002 FE650e to a supermoto. One problem I have is that the previous owner who only used the bike in the dirt cut about four inches or so off the chain guard so that I am getting chain oil fling up on the edge of the right side of my rear tire - not real confidence...

My timing chain on my FE 501 did just break.... And now I'm wondering where I can get a new one and if its smart to use the old one? It was only a link that did break if I get a new link it will be as good as new? And how should i fit the new one?

Hi all Looking at changing the cam chain tensioner in my 2010 berg fe450. Any advice would be appreciated on either a Dirt Tricks or DJH. Which is best and how easy to install? Cheers Jon

2007 fe550e piston inspection - tools needed I'm about to check the piston in my 2007 fe550e that has not been worked on since new. I want to get all the tools and parts before starting work. 1. Looking through the workshop manual one thing I am unsure of is whether I need to buy a new...

My 08 fe 550 has been making nois and progressively into a knock when I went to tighten the cam chain tensioner, i saw it was at the end of its adjustment. So a mechanic buddy of mine suggested welding a small block at the end of the tensioner to extend its reach. the knock continues. took...

I have question. What tools do you use to rivet IWIS cam chain? Husaberg OEM tool? Maybe KTM tool also works?

Sold Sold

Hi, I've just put together a 2004 FS650E with a new camshaft, it's bearings and a set of KTM double spring set after one of the conical inlet springs broke... I also put in a new DID chain and I realise after 2 hours only that the tensioner is all the way out already! Anyone having any...

H20004502 can anyone know what you can use analog. the mail to Russia. with the number please.

Yes I am that wierd snow guy and have my own set of issues! :mrgreen: Last week it was -20deg F. I fired up the 2010 FX450 and let it idle up to operating temp. Then two miles up the trail it died. Upon inspection I found the timing chain guides completely melted and totally wore away with...

Hey everyone, I keep damaging the chinsy factory chain guide on my old 97 501e. I have read a lc4 guide will work as a upgrade. Question is will a aftermarket guide for a lc4 also work ?

OK im all for getting along and if nobody is "allowed" to write 4 pages of abuse in my direction every week anymore it should not be a problem now there is a bit of a numerical anomaly that may be of interest to some people my DID cam chain weight 255gm (OEM) my IWIS can chain weight 272gm...

Hi all, Just wondering if we need to run the VT2 narrow chain on the 70 degree Bergs (I have an FX 450.) Or will "regular" O-ring or X-ring chain work fine? Jeff

Hi all, I'm looking to replace the chain on my 390 and was wondering what options are available? As you all know the stock is the DID VT2, and for some reason best known only to the local importers, I can only get it in gold, yes that's right, GOLD!! I mean seriously, who wants a gold chain on...

Hi, New to this forum here. just picked up an 08 550 with the 4 gallon clark tank(black tank is ugly), will be looking for a stock one soon. Even with big tank, love the bike. Way easier and nicer to ride and race then a 94 CR 500.lol Just dont like the cam chain side breather throwing...

HI, Could someone explain in depth and in detail how one is to setup / handle / load the timing chain tensioner on 2009 FE 450 Husa? The manual reads on page 124 "Press the timing chain tensioner together completely." Next it says "Place two spacing washers or similar aids next to the timing...

08 FE450, not sure about the length of the chain I have at them moment but it's not long enough (I'm not sure if how many links it has) What length do I need? any recommendations. X ring or O ring? Thanks

Hi everyone, I purchase a new 2012 FE390 around 1 month ago and I absolutely love it. I'm slowly making modification as I work out exactly what I want and one of the first things I have done is install ultra heavy duty michelin tubes. I threw in the rear tube yesterday and when putting the...