chain

Hi, i just got my bike back from berg dealer who'd put new chain on it. However when I'd got home and had a proper look I noticed the chain still vv slack and it seems to already be at full adjustment - ie fully back in swingarm beyond where the notch is just equal to the furthest back notch on...

Hello guys, I am a n00b to Huza's so dont really know what to expect from them in terms of sounds they make. My bike is a 2003 400FE that starts on the button or with one kick so I reckon that everything in the combustion part is good. My worry is that when the bike is idling, there is a...

Hi I fitted a new cam chain in a 470 can you tell me if I should use the rivit link or the split link which cam with the chain. The split link seems wider than the rivit link Ian

just to say that i have absolutely no idea what the correct chain tension is on a husey! perhaps you'd like to tell me! i have always done mine the same way and interestingly, in the IoM i showed grunt and ady my style and they'd never seen it before thus posing the idea that maybe i'm...

hello every one, im rebuilding my 2003 650 engine, in replace my worn bearings i need to remove the lower cam chain sproket of the balance weight shaft. i have tryed heating it up and using a puller but is tighter than a ducks ass, anyone know of any tools i can use or tips to get it on. thanks al

Have 01 650 need cam chain ,sprocket , tensioner .Whats the best source for parts in the U.S.the parts on my engine are original and worn. Hear that parts aren't available till begining of October from KTM.

Hi everyone, Would anyone happen to know if you can use a 98/newer slider on a 96 600? I understand they moved to a two piece in 98 and they dont sell the old one piece anymore. Thanks!!

I have a fe 550e -04 which i have replaced cam chain on and when i checked the tensioner position after 2 hours of usage i found out that i only have one mm left on the tensioner. I have checked the the timing chain tensioner (plastic and found only little wear and i checked timing chain...

Following everyone's advice, I ordered a new cam chain tensioner as well as a new tensioner arm. The new tensioner is longer by about a millimeter, I wonder if it was really worth the purchase, but the new arm (or lever, however you want to call it) seems to be beefier, but does not seem to...

I know some of you have already answered this in the past but I am a little confused about the exact methodology one has to use in order to change the cam chain without screwing up the timing. I have a new chain, with the proper number of links per the manual, a new, updated, lever and a new...

Hi all, You know when you get that all is going to well feeling, you know some has to go wrong well I've just hit it. I've just totally rebuilt my 550 2004 engine every thing went fine until fitting the cam chain, cut the new chain Regina 66 links but when fitted loosely, ie no tensioner...

Hi All, Can any body tell me how many links there are on a standard 550 cam chain?. Sparks.

Hi All, Any body got any good hints for loosening a seized chain adjuster apart from sheearing it off and drilling it out. Sparks.

Hey guys, I am curious, how much cash should I expect to dish out (in US dollars) to replace the camchain, camchain sprockets (steel ones) the stock is aluminum on mine, and to update my chain tensioner on my 2000 FC501? Also, who would be good suppliers for parts? The last part that I ordered...

like the subj says - my old chain wear guard is toast - where to get a new one? can I use a generic equivilant from a honda-suzuki-kawa something or other? or do I need to visit the local dealer? anyone got a part #?

Alright, now I have all the parts and the time to fix my Berg, since my rocker cover exploded. I have the upgraded cam chain, along with the new plastic tensioner arm and the new tensioner itself. What steps and precautions do I need to take when replacing the cam chain, so I do not mess...

are they available for husabergs ? the acct is constantly putting pressure on the cam chain , a simple back fire can cause the tensioner to extend . the MCCT could be the solution to the stretch factor of the cam chain , as most of us know the rod of the acct can be fully extended in a...

How do I check the cam chain for wear and how can I tell if it needs to be replaced? I know it probably has some wear but when does it start to affect valve timing?

I just removed the supermoto wheels on my FE650 and realized the chain was too short for my off road wheels. I went from 42 to 48 tooths. The manual says to use X ring. I already have 2 almost brand new DID 520VM 112 links (one is from the supermoto setup) Here is my questions: 1) What is...

Back with even more questions :D Searched this forum and the timing chain and tensioner upgrade is recommended by a lot of people. Am I correct that the timing chain needs to be 'upgraded' with an older model chain? If so wich year chain do I need? What exactly is meant by the...