chain

I broke one of the swingarm attachments (the rear one) to the chain guide. Is it possible to weld on the swingarm or am I relegated to replacing the swingarm?

Hi there! My search did not reveal a lot; is there a cam chain replacement how-to which I could consult when replacing the cam chain on my 2007 FE550? Can one simply use a cam chain link, connect the new chain to the old one via the link and pull the new chain through from the top of the...

Recently purchased a 2010 FE 390 and first job was to replace the cam chain and tensioner as previous owner hadn't realised it needed replacing!! Used standard Husaberg parts and engine is all fine. Anyway, coming from a 2006 FE 450 I still notice the 390 engine sound (tick, tick, tick) and...

Hey guys,don't know why but i can't find which chain guide and chain slider i need for my 08 Husaberg FE450E. Anybody know which KTM models cross over,or where i can get them.Thanks.

2002 FE400. My first Husaberg, finally, and wanting to make sure things are in check. I'm aware of the recommended upgrades to both timing chain and slipper but have been unable, through searching this site as well as owners and workshop manuals, to find the proper procedure for adjusting the...

Just curious if anyone has re-geared their fe 570 while keeping the stock chain. I put a 13 on the front and have the axle back almost all the way now. Anyone know how many teeth I can go up from a 42 and still use the same chain? I am trying to not spend to much on the bike right now and...

Just about to change my chain, which is at max adjustment. It has been suggested that I should also change the sprockets even though they look ok. Do you normally change sprockets as a matter of course when getting a new chain? Thanks

looking at replacing the cam chain on my FS650 2004 has a iwis in it. What brands and thought has everyone got? Regina (dcr) Iris (taffy) DiD or iwis?????

Do I have to break the cam chain to change the cam and remove the head on my 01 650. Previous owner just had it changed. I don't want to fix what's not broken Thanks

just picked up a new 09 570 and the factory chain has stretched beyond the adjustment range, it is a 118 link and gearing is stock has anyone encountered this ? and will a 116 link fit with the adjusters all the way in ?

So i have a couple old berg ( 01-03) seams like every one I have ever gotten has needed new cam guide (updated one) and some times a new chain due to no length left in the tensioner. Do these old style guides wear out super quick or do all the bike I get have super high hours despite the low...

Hi all im struggling to find a swingarm chain slider for my 2002 650 will one for an 2004 on fit? any help be appreciated thanks

Hi guys n girls, Had a sad day today. Took the bike out for a little blert, & shortly into the ride the chain snapped. Scored the rear anodised wheel rim badly, so they're a right off... :cry: Anyway, I'm looking for a fairly good quality replacement chain, I believe "x-link" are the best...

hello so im upgrading my timingchain parts because tensioner was broken. here are the questions; -03 tension arm is better than original? -05 chain tensioner is the one i need? -05 did timing chain fits? im going to order those parts, but it would be good to know that they fit and they are...

My 04 Chain adjuster blocks are in need of attention and I spotted these on feepay http://cgi.ebay.com/ebaymotors/Bolt-Cha ... 2c5b6a46c7 It says 05 onwards in the ad but hoping they will fit my 04. Anyone have any experience?

Has anyone fitted the DJH Husaberg cam chain tensioner? Just wondering how much thread you had left on the adjuster after installation? Not much thread left showing on mine so I would presume my timing chain is pretty well stuffed already at 1800 klms. Anyone done the timing chain yet and...

Can anyone head me in the right direction as to where to find a replacment timing chain? I had a helluva time finding the connecting rod but found one on ebay and bought it. That timing chain is the last piece of the puzzle, well then I need a top end gasket kit as well. Thank you in advance

Just wanting to make sure before I buy a chain what size I need. I have 15 tooth front and 48 tooth rear on my 2006 Fe550e I'm thinking Regina O-ring. Will I need 120 links?

I found a spiffy blue anodized manual cam chain tensioner for the FE for about $45. Anyone using these in this bike? I am new to the FE, actually it is still in transit to my house. Planning the mods already. My last bike was a DRZ400 - they had terrible tensioners that sometimes failed with...

Does it make sense to spend any of my hard earned cash on aftermarket chain guides and slides (like TM Designworks)? Or does it make more sense to purchase something like a swingarm guard (like the bulletproof guard on 70 Degree Racing's website)? Or neither, the stock set-up is just fine...