chain

Please tell where to get rear disc for 2001 400FE. Plus a chain guide / swingarm guard. Anywhere in Canada West? Thanks, L

Alo. Just bought another berg 2012 450. Kept my 11 so far. But i have a question! On The 11 and earlier its allmänt mandatory to change to a manual tensioner. As i rode home with The 12 bike today i called a buddy. He believed that they changed the tensioners on The 12s. Is this True? Or...

Hi, Has anyone ever installed the DT tensioner on a '13 FE 250? In their website they say it should fit '14 models, but no indication for '13. I did try to install the TC-2 model, but it was too long and didn't fit. KTM Timing Chain Tensioner Style 2 | Dirt Tricks Thanks Elasio

Hello All, I am looking for a good replacement chain. I was looking at AFAM Chain. Has anyone every heard of this brand? let alone used one on their Berg? What is better XS-ring and O-ring chains or neither??? any Info would be great! :)

Hi all, i did a quick search on the forum and didn't find much. Have a 2011 570FE and trying to set my chain tension. seems obvious/simple...but if i go with the instructions from the manual...which says to put the bike on a stand and push the chain up from the bottom and measure 8-10MM just...

With engine parts becoming hard to source its becoming increasingly difficult to understand what parts will work with others when you locate NOS in some of the old Husaberg dealerships Point in case is the timing chains fitted to bikes from 1989 to 2004. My understanding is that Husaberg (and...

With a 'supposed' 90 hours on the meter I decided to check the timing chain, tensioner blades and the tensioner on my recently acquired '04 FE501. My first discovery was that the tensioner was within two clicks of fully extended, but that the chain and blades looked OK. The chain was no where...

hello! I basically put the lower cam chain sprocket the wrong way around and it slid all the way to the bottom with one or to gentle taps, preheated to 200C. There is maybe 2 mm room between the teets and aluminium. No chance for the puller to reach in. I did get some steel wire around the...

I was hoping someone would be able to help me out with the measurement for where the tensioner sit in the head. Following the explosion of the top end I've finally got it welded up but lost the location of the bolt for the tensioner for a 2002 fe400 head. If someone could help me out with this...

The chain on my bike 09 fe450 is worn quite badly, to the point that the clip on the split link is almost worn through!! The only place that I can see where it's wearing is on the chain guide at the bottom by the rear sprocket. I'm new to dirt bikes, is this a normal wear and tear thing? Or do...

I have a 2004 FE450 My buddy is going to lend me his sumo wheels I will run 15/42 Gearing What length of chain will I need ??? I am running 13/50 now with 116 links Petty sure my chain will be too long Thanks Frank

I am not sure if my tensioner is gone or not... I have not checked it... but the bike only got 60-70 hours on it... I was looking into these because they seem more reliable? This will also give me the piece of mind to check the chain every time I change the oil... Blue Manual Cam Chain...

Got my engine in to one piece for a long time. :p Still waiting for my yellow as f**k frame and brp special black swingarm. :cool: So I had nothing to do and decided to check everything possible on the engine, valve clearances etc. Timing chain tensioner had only 4 clicks left. :eek...

Hello, I recently bought a 2002 year Husaberg FE 501 and when I pulled the clutch cover to check for the source of leaking oil I noticed that the cam chain had made small scratches into the block. It seems that the harder I push on the chain tensioner blade the closer it moves to the block. I...

Hello there, I recently bought a new DJH tensioner for my FS570, before fitting it i decided to called my dealer mechanic and he told me to not remove the factory tensioner without the engine being at TDC or the chain could jump causing the cam timing to go out. I questioned him on this and...

What is the best way to mount the timing chain on 04-08 models? The workshop manual has a procedure but it is with the clutch basket removed. I would like to leave clutch in. The head has been removed and reinstalled. I can get everything to line up O.K., TDC, balancer to primary...

Hey there folks, Just wondering if anyone knows how to contact Dave at djh? I've tried contacting thru the web site but can't seem to get a reply..I need a new tensioner for my berg urgently and wanted the djh manual tensioner..but if I cannot get hold of Dave I may have to use dirt tricks...

Hi guys! I decided to tear down my bike this winter and pretty much check everything to make sure its all kosher! Right now my bike is completely torn apart and everything looks great, but my swing arm chain guide is worn pretty good, and id like to replace it before putting everything back...

Yesterday I did a slide onto the frame because the frame is already heavily worn by the working chain. To do it I used a cutting board. I wonder if would work? How do you do you protect the frame? Do you have any patents?

ok guys ... experience with split links and rivet links ... who has used what and how was reliability ... then next question ... is where to purchase in uk ?