brake

Hi everyone, A local place around here is blowing out some old husaberg parts and they have an amazing deal on the beringer 6pot/rotor/master cyl. Around 500 dollars CAD for everything! I have a set of KTM supermoto wheels and just recently purchased this EBC rotor and adapter, but now that...

Hi all! Bought a FE570 2011 with only 6 h on the clock a few weeks ago. Due to children coming along I haven´t tested it until yesterday. To my surprise the front brake lever had very little resistance and I easyliy pulled in all the way to the handlebar. I tried bleeding (no air found)...

So, I've got a 2010 FE450. Came back from a ride...noticed a bit of drag in the rear brake... Upon further inspection...the slider pins for the rear caliper were bent (as well as the pad retainer pin). You can't get new slider pins from Husa or KTM without buying the whole caliper (which is...

Subject line says it all... I have a '10 FE450. What are the OEM pads? Sintered or Carbon? Pros/cons of each? I've found the following: Carbon - less heat Sintered - better for mud and sand, hotter, last longer, hard on rotor Thoughts???

will a CRF rear brake lever fit a 03, with a bit of adjusment :?:

[attachment=0:2vcne7al]CIMG1474.JPG[/attachment:2vcne7al] What kind of froze did you think i meant? It's cold here....

Well, I just broke another front brake lever. Oddly enough, the tangs that push the pushrod in broke (as they did last time), and despite 10 minutes digging in the dirt I couldn't find the pushrod.... again! And just to rub the salt in, the world decided I should brake my arm in this latest...

Hey guys, new rider here (Canadian living in Iceland) with a 2008 fe450 having lots of trouble finding a replacement lever for the front brake... Long story that starts with me ordering from http://www.midwestme.com/pages/product.html thinking it would work. turns out this lever does not...

Hi everyone. Berg Fs650c '02. Have someone any ideas where to get these wave spring washers for not stupid price? http://www.sdp-si.com/estore/CoverPg/Ha ... ashers.jpg http://www.hkmetalcraft.com/Images/Prod ... ashers.gif ID=14mm, oD aprox 20mm. Who have bergs with beringer rotor knows where...

I have been following the "locking front brake" thread where there is a ton of great brake fluid info and since i am thinking about it, i had wanted to change my front brake fluid but on the master cylinder cap it reads 3÷5 brake fluid is recomended? it plain as day says "3÷5", i have never...

Will KTM disc guards work on my fe570?

Hi I'm new here so take it easy on me....... This is the first Berg I have owned and I'm not entirely sure of its history. Anyway its an FE400E 2002. I've taken off the rear brake pedal as the return spring wasn't returning the pedal, it was relying on the piston to return it. I have tried...

does someone know which ktm lever fits, the dealer here in iceland wants too much for it so I need to order this online and I have no idea what ktm lever fits. please shine your light on this, it would be much appreciated

I in stalled the 2010 LED light on my 2011 570. When I installed it, the light worked properly with me front brake lever. After 1 ride in is permently on. Any one else have this issue. Is it one of the brake switches? How do I test? thanks, T

Bike is 96FE600E that had been sitting for a few years. Front brake locking while on the trail and I waited untill pressure realeased - couldn't even move lever. Got it home and cleaned master cylinder, line and caliper. Fulid was pretty bad so I flushed with brake clean and used DOT 5 to...

Guys, nearly wiped myself out at the weekend. Was building up speed round a little road circuit near me, braking later/harder, getting the tires up to temperature etc. Next mini-roundabout & the front break leaver was suddenly crushing my fingers on the handle bar, and I'd lost a lot of front...

Are there any servicable parts in a front brake master cylinder? No matter what I do I can't get good lever feel with bleeding it so I think something is wrong! The caliper slides freely and the pistons go in and out well so I don't hink it's this! Any other possibilities? When it's all together...

Hi guys, Are brake pads available through KTM dealers? If so is there a part number that they would recognise for a set of front brake pads on a 2004 FE 450. Many thanks! Ben

Hi all I have an '11 450 and i just saw the lovely blue levers in the power parts. I also saw the front brake flex lever, which i am also a fan of with my great crashing history.. :angry: Now they don't make a blue flex lever for the front brake. But i was wondering if o get the front brake...

Im a mew member. I live in Utah where can I purchase a Magura Left hand brake kit? I read on the forum that it is in the Husaberg part inventory but I cant see it. Please direct me. Thanks