brake

I want to buy a new set of wheels for my Husaberg FS 570 2011, of a different trim, but would like to keep the originals. I've heard that the hubs (both front and rear) are pretty much the same for all Husabergs and even some KTMs, but since I'll probably import them (I live in Brazil), wanna...

Hello! Anyone knows what options (if any) there are for shorter clutch and brake levers for the FS570? Thanks Rickard

i've done front brake pads plenty of times but never come across this. i put new pads but no matter what i do i cant get enough space for the disc to fit in... see pic below. i've made sure the pistons are depressed as far as possible. they are about 1mm shy of being flush with the caliper...

The other day I adjusted the rear brake to raise it up above the peg and removed some slop since it felt a little squishy. I went riding today and after a bit the rear brake started to lock up, presumably from my adjustment from the other day in combination with the rear brake getting warmed up...

(07 Berg 550FE) First the easy question, in the manual it states to use DOT 5.1 brake fluid but then on the side of the bike (near rear brake reservoir) it says to use DOT 4 brake fluid only...ok, so which one? Secondly, just bought this bike and took it on first ride and was only riding for...

Hi all. I am just looking at changing the brake pads on a 09 FE450 that I have just purchased and noticed that the rear outside pad has a piece of insulation and a steel sheild between the pad and the caliper piston. None of the other pads have this and the parts listing on line doesnt show it...

I feel really stupid for having to make this thread, I checked the owners doc and all it says is it is "difficult". I did the front brake with no problems at all, I reverse bled it with a syringe with some clear tube on the end, I could physically see that no air bubbles went in but when I...

Has anyone else got issues with their rear brake lever causing excessive wear on the clutch cover. My bike is only 1500klms old but it looks like I need to replace the cover already... and no it hasn't been dropped hard on the side. :?

Hi, I need to replace the front brake switch on my berg and think that I would prefer to go down the path of the banjo bolt style switch instead of the fiddly little electrical switch under the lever (gets caked in mud and ceases all the time). Is there any reason not to make this change...

While replacing all the brake pads and fluid on my 2005 FE450 a few days ago I discovered that the rear brake cylinder does not line up very good with the rear brake pedal pressure rod / plunger. The rear brake pedal would hang up and click the first few millimeters of downward movement. I...

I'm looking for the measurement of the brake hose that i will need for a LHRB on my 01 fe650? If someone has done this conversion, i would appreciate your input. I'm going right from the clutch m/c to the rear caliper. Thanks in advance K

Can't seem to find an aftermarket brake pedal for my 2010 FE450. Don't believe the Hammerhead Designs one will fit. Any other options?

Hello, I have damaged front disc. Disc have movement if i move it back and front. In attachment is picture. Anybody knows is it possible to buy only this aluminium part of disc? In our country entire disc brake is insanely expensive, and this brake disc is ok but rivets and this part as I...

Rear bake worked fine the last time I rode my 2011 FE570S. Now I've got absoluteely nothing. I tried conventional bleeding, a Mighty-Mite to draw fluid through the line, a synringe to pump fluid through the line, and nothing. I can't get the thing to bleed. Help.

Howdy! And yes, I alread did a search. "ppllbbb-t-t-tt..." :hihi: Only got about 2119 hits. Mostly due to soft, mushy brakes. Does anyone have the part number for the stock, front brake pads on the 2010 Husaberg FE 390? Thanks! E-Ticket

I recently bought a Beringer 4 pot caliper and I am trying to get a disc to fit. Can anyone tell me for sure the correct size and where I might be able to pick one up. Cheers

Hey all I'm sussing out an oem or aftermarket chain guard for my 2009 Fe450 so I can road rego it to Queensland road specs ( Australia) . After searching around I haven't found much about them apart from some models come with them stock. Does the Australian delivered version come out with...

My turn signals lasted all of about 10 seconds into my first ride before the supporting plastic broke and they fell off. And it appears the rear brake light is also too heavy and starting to crack the supporting plastic. Wondering if there are good options for a 2011 FE570s that are lighter...

I would like to move the pedal position lower but I am already bottomed out on the master cylinder. I ride with my foot over the pedal and with it in the position it is in I tend to ride with the brake applied which in turn heats up and squeaks when applied. Anyone else have this problem? If so...

Anyone put on a larger step plate for the rear brake? I find the stock one is a little small, sometimes its hard to find when you are in a hurry.