brake

Hey, Has anyone else had any issues with their rear brake on a FE450, 2013 Model? My rear brake needs to be pressed about half way down before any braking power kicks in. I've installed a new master cylinder, do you think it just needs to be bled again with a bit more fluid? Or could...

Hello gentlemen.my bike which has just gone back together,seems to be doing a couple of odd things.first headlight flickers as I'm kicking it over? Second I noticed is the bike running lights off if I grab front brake headlight come on?? Oh and no indicators working.any help or a starting place...

Evening all, sorry if this is posted in the wrong place I'm new to the forum and supermoto's. I've just bought myself an FS650e today and love it to bits already but got it back and noticed the Beringer front floating disk has quite a bit of play front to back. I can rock the bike forwards and...

Hi All, I'm wondering if any of you might know of a aftermarket Front Master Cylinder rebuild kit for a 1996 FE600? Any help is appreciated. Thanks!

Hi All Just wondering what after market levers people use? I bought a pair of scar which look nice however the brake does not fit because it is for an FE and mine is converted to Motard so different brake master cylinder and scar only make levers for dirt bikes. Regards Sent from my...

I am wanting to hook up my rear LED taillight to my Berg's newly installed hydraulic brake light switch. Can someone provide me a diagram on how to do this? Taillight has three wires: 1. Black wire=Ground 2. Red wire=Power 3...

My bikes currently broke with an electrical issue and I'm having to rely on forum members for assistance. I'm not the best with electrics but I have managed to make a pretty decent rear thumb brake. So I thought I'd share what little I can! I decided to fit the thumb brake as my right foot with...

Hey guys, do you know where can i find the cheapest front brake pads for 6piston beringer brake? It's very hard to find ones. The model is fs650 and it's 2004. Is there any cheaper model than the original? :o Thanks already

Hi All i bought a fe 650 dismantled a few years back and have slowly been putting it back together but i have came across a snag. I am not sure how the spring sits on the back of the break peddle, i never seen it assembled. I see there is a 2 mm spacer and a 5mm spacer with a washer on it...

For those with 70 degree Bergs, I'm trying to figure out how the street legal bikes with rear brake banjo bolt sensor have their wire routed to the taillight? My bike is a FE570 with FMF full exhaust and that pipe is very tight in that area near the rear master cylinder that I'm not sure how...

2011 FE 570 with only 1,500 miles on it. The front brake lever pulls all the way in and has 0 stopping power. The reservoir is full of brake fluid. What are the possible reasons for brake not working? Thank You! :)

My rear brake master cylinder seems to be missing the little clear cover that is supposed to be over the fluid. The rear brake is still working, so I am confused as to how it is working and what damage could be caused. What do you think I need to do, and can I source one of these cover/caps...

Do the majority of the bergs with left side kickstarters require a longer rear brake line? I have been trying to get SS lines for my 1999 fe501e I assumed a berg 550 line 2000+ would fit on the rear as they also have left side rear brakes . I ordered a Hel line and I received a line 1/2 the...

Forged rotor. fits Burgs and KTM. $850

I have a bit of a problem that has been racking me for quite a while now. Last year on my last ride half way through I lost about half of my brake travel and only got a little brake when the pedal was about 3/4 down. At the time I thought it was just low on fluid so I never thought much of...

After a complete rebuild of my 92 FE 501 we cannot find the bolts that attach the front brake caliper assembly. The aluminum mount and wheel/disk is all OK. Is this the same front brake assembly used on a KTM? Husky? or? If no bolts, our alternative is to replace the entire WP #4054...

Brake light wanted for 2010 FS 570. I believe the 390/450/570 09-12 are the same . . .

Hello all. I am in the middle of a supermoto conversion of my FE570S. I have a set of 17" wheels and tires sorted, and I was wondering what braking system to go with? Thanks!

I need to add a brake light switch for my front brake to satisfy the local dmv. I have one of tusk universal switches. I need some help on how to wire it in. Is the harness already present or do I need to splice it to the existing on for the rear brake.

Hey fellow husaberg riders, I have a Husaberg FS 650 e 2006 model, and i want to build a left hand rear brake on my bike. I have been contacting 50stunt, to hear if they had any kits for my bike, and they do not make a kit for my model sadly. I would like to keep my foot brake, i have...