brake

Bought this bike last week. My tail light works, which I refer to as a running light, but I cannot get any sort of brake light to actuate. I pulled the seat and noticed that there are three wires that come from the rear light to the area of the fuse box. I'll post a photo of them. I'm not...

Recently picked up an 2011 FE 390, overall everything is great, just one tiny thing bothering me.. the front brake! It isn't a squeal as such, it isn't there all the time, its when I'm on the brakes at say >60% of the brakes full force and having slowed down to around 25-30km/h. If i grab a...

Gday folks, My hand brake lever nearly pulls into the hand grip. (FE650) it works well, no drama, but such long travel. I have used the black knob there to adjust it out as far as possible, till it fell off doh, its on, but no adjustment left. So what are my options ? Cheers David

Hi. Ive been enjoying my newly acquired FS650, 2008 for a few weeks, but have a small problem...the front brake lever is to close to the handlebar. Its adjusted all the way out, but still its in my way when things get a bit rough. Do anyone know if I can get a strighter, shorter or more...

So I'm fitting 17s to the berg that came with a 320mm rotor. I'm looking for a 310mm rotor to match the Beringer caliper that mounts direct to the forks. The wheels are from a aprilla pegaso I think and I can't find a 310mm rotor that will match the wheels. The measurements I need are...

Hui Guys, ive noticed the rear brake light on my 650 doesnt light up when I pull the front lever, it works with the rear brake but not the front. I have checked the connectors behind the headlight, cleaned them up and cleaned the little switch under the lever itself, other than this im a bit...

Hi! Just noticed today I'll need to change my front brake pads soon. Took a look at the manual and found that it has these at the moment: 50313030100 - BRAKEP. SET FR. TOSHIBA TT2701 HHB But it also has 3 other pads listed there: 50313030000 - BRAKE PAD SET FR. TOSHIBA H38...

Gday All, Was reading the 06/07 650 manuel today, it says only use Dot 5.1, on the master resivour it says use only Dot4 ?? So what to use ?

I am in the middle of modifing my 04 650 fs berg after a little crash. I have got few possibilities to choose from and don't really know which one should I choose. Parts that I have got: -standard 2004 brembo m/c, magura radial m/c and braking.nl mc7402 radial m/c; -310mm beringer floating...

Saw this in the owner's manual and just wanted to make sure everyone is aware of the importance of keeping the brake disk free from oil and "fatty matters". Prolly best not to be eating fried chicken while doing a brake job. Food for thought. Cluck! :mopedsmile: Steve

So I replaced the front banjo bolt on the master cylinder with a Sicass Racing front brake switch. It came with a new copper washer. I purchased a second new from my dealer. This way both sides of the brake line have new washers. I then tried conventional bleeding with a motion pro brake...

I've been a lurker for quite some time, in fact thought I had an account, obviously not. Anyway, I'm here (officially) now. Wanted to see what you guys have tried and how far I may need to go (money-wise) to make the brakes proper on my '11 FS570. The bike is new to me for this race season...

Hey guys! hows it goin? The light on my bike is an led brake light and it is incredibly dim. I'm trying to find something that would be a little bit brighter! If anybody knows any lights that look good and are more visible let me know! I always get paranoid if i have to hit the tarmac that some...

Hi guys Fitted a new rear light today and was going well,but noticed when I have the lights on the brake light works,but when I turn lights of the brake light don't work,any ideas guys got me puzzle the new light is a l e d

Hey just bought a 2012 te 250. The bike has a taillight but no brake light hooked up. I was wondering if anybody knows if this bike is per wired to have a brake light? If so do you know if I can just buy a plug and play setup and where can I get this? I would rather not use a generic hydraulic...

Does anyone know the part number for front brake pads for a 08 fs650e? Are there any options for different pad compounds? Thanks

Hello! My bike is afaik "a real supermoto", not a converted one. It's an 2004 FS650E. My local Husaberg dealer wants to sell me partnr 80009060000 for somewhere near $575. Are there cheaper versions of this rotor? Are there any downsides to using cheaper rotors? I've looked on ebay, but I'm...

hi all my rear brake rotor guard got bent and the clearance from the rotor is 1cm now. Anyone tried to repair the guard. Should i get it out and try to get it in its initial flat form? I am worried about its strength limit. Thanks

Hey everyone Iam in the process of adding a dual sport kit onto my old 97 fc510e. My hold up is what to use for brake light switches ? What do you guys normally use ? Thank you

What are the 2 wires for that go into the front brake assembly? Is that for the brake light? The light does not come on using the front brake.