brake

Because I wear down a lot of pads & disks I'm always looking for the best deal. And although I'm very pleased withe the price and overall quality of, for instance, GoldFren brake pads I do prefer the original stuff so I tried to source down the original hardware. Through KTM the pads and disks...

HI I AM WANDERING IF ANYBODY HAS EVER SEEN OR USED A UFO BRAKE COOLING DUCT ON A 2005 FE 550? I HAVE JUST BOUGHT 1 & I AM WANDERING HOW U FIT IT? THERE ARE TWO BOLTS,1 THAT REPLACES A BOLT IN THE FORK GUARD ? 1 THAT REPLACES 1 OF THE 2 ON THE AXLE KNUCKLE THINGIE? LOL! I CAN FIT BOTH OF THESE...

An electrician I'm not. I have just installed lights on my '09 FE450. For the rear I plugged in the three pole molex plug under the battery box to the rear light and I used the two pole molex with a jumper from the white (power) wire to the green and yellow wire that my schematic indicates is...

Hey all I'm fitting a thumb brake to my berg, but a but unsure about the routing of the hose! I was just gonna go straight down the frame on the left of the bike? But wondering if the heat from the engine will affect braking etc?

Hello, I bought my '08 FE 650 out in Boise and took the long way home back to Chicago. Instead of 1600 miles or so I did 2600+ to take advantage of the opportunity of experiencing the roads. Great choice. Wow! If been riding this incredible beast everyday since. Yeah, I've heard all the...

My rear brake has stopped working. The bike has been standing for about two weeks, the brake fluid was a bit low and the brake was pretty bad. But when I tested it the day after the brake did not work at all. I have tried to bleed it, with pretty much air coming out but the brake still not...

Does anyone know if the rear brake pads from an 07 ktm 525 would fit my 07 FE650? Only have KTM dealer in my area. Can't find any for an 07 FE650 on ebay. thanks

The light appears to be on all the time. But when I pulled in the brake the light SLIGHTLY goes brighter. I was trying to get my M2 license and first they check your bike, the guy couldnt see it and so he said it was not working. How can I fix this in a timly manner? 2005 FS650E 1500 km/s...

Hey Boys, Well after a 6 week house renno, getting married and then pissing off all my family back to the USA...I can get back on to finishing the Berg so I can go riding. So I'm putting the rear brake pedal on and as much as I hate to have to do this because you'll all...

Hi to everyone! First i would like to announce that i am now proud owner of 2007 550FE. It is my first Husaberg and first 4-stroke so its scary peace of machinery (in lovable and exciting way)! Anyway i cant locate front brake switch. Brake light goes on only when pressing back brake pedal...

Can anyone give me the specific location of the 2 pin front brake light switch connector? been digging around in the spagetti and havent been able to locate it yet.

Hi folks, I recently bought a replacement Brembo brake light switch (little micro-switch that fits under the master cylinder body on the handle bar to activate tail light). However, after fitting it I've noticed that the rear light is on permanently. I unbolted the switch from the handle bar...

I'm replacing my rear pads for the first time and noticed they have a shim and insulator from the factory with Braking brand pads. I realised this could be why I haven't had the "ktm squeal" like the orange bikes have. (Or do they have them too?). While installing the new EBC pads, the package...

What can I use Manual says DOT 5.1 I was told Dot 4 is OK What should I use Don't want to wreak anything Thanks Frank

Guys, I noticed when I re-fitted the wheels recently that you had to "pump" the front break lever a couple of times before I got any break. I've looked in the service manual & only find instructions for bleeding the clutch & cooling systems. I also looked in the Owners Doc on this site &...

Are the brake pads for my '03 FE400E tha same as a KTM 450 XC?

I just got back from a quick squirt and found the back brake had been dragging ,the whole plot was red hot, the lever wasn't out of adjustment or anything like that and once it cooled down it was all free again. I checked the Piston and slides and they were all free and not sticking, just...

Is anyone using brake pedel extenders for the rear brake? My pedel is very close to the motor case. I find it hard to get my foot on it when I need to brake. I've never used extenders before but I feel that I need to do something to improve things.

I have tried two different sources for rear brake pads, is there a different caliper if it has the colorado 500 swing arm , tried two different sets from two different sources, ebc, parts unlimited any secret, thanks from alabama.

Hi all I have an interesting problem, over the last couple of months I have been getting air into my front brakes. For example I ride the bike one day and a day or so later when I check the bike the front brakes are gone, I bleed them and they are fine again. I could ride the bike several...