brake

hi guys i was thinking of getting a revloc slipper clutch, they also have a rear lever brake kit for a ktm for 209.00 has anybody seen one of these..... is it a thumb brake or a conversion kit for the left hand lever? and lastly will it fit my 05 fs650e berg? I have emailed them but had no...

Hi there, a failry minor enquiry but I put my brake lever back on after fiddling around and now it sticks when depressed. The sping is in correctly but I wondered if there is a spacer I'm missing. From the back of the bike lokking from left to right there is the nut, colar, spring, spacer, lever...

Is there a ktm line that will work on my 2001 fe650e front brake system. What pads would be good for mostly street riding? Thank you for your help.

Howdy gang, long time no type. Have any of you tried the check valved bleeders on your bikes? I've bought a couple sets of these brake bleeders for my trucks. They are great, and work exactly as advertised. So I'm planning on getting some for my bikes. Check them out at www.speedbleeder.com

i'm after more power from my front brake (02 FX470).... one finger power. anyone figure out the best rotor pad combination?

As far as I can see there is no brake light switch mounted on the front brake of my 05 450FE. Regulations in Holland say a break signal from front and rear breaks is mandatory. Only my rear brake has a switch. Anyone familiar with this problem? Regards, Mark

Hi, I am creating a supermotard from my husaberg FE400E '03, I already have supermoto rims (BEHR/KTM) and tyres. But now i bougt a Braking 320mm brake disc and a brembo 4 piston caliper and a FTE radial brake pump (from a 'real' husaberg supermotard) to replace the current front brake system...

02 FX 650 Ok admitedly a bone head move, but I am putting the bike back together in anticipation of Sparks stator getting here, and I cannot remember how the spring goes on the rear brake lever. Could someone explain or post or point me to some detailed photos. I know....I should have taken...

Fitted new rear brake pads last week and took the bike to the track on Sunday for 3 hrs. When checking the bike over before going out again last night, I noticed the rear pads were worn down again TO THE METAL - no pad material left! I wasn't riding around all day with my foot on the brake...

where can i find one? am i stuck with a custom job? are the forks from the '99 the same as any KTM? looking forward to doing sm with the 'berg... thanks in advance for my newbie questions.

I've just bought a brand ned Brembo master cylinder with the external fluid reservoir. What i am missing, is the hose between the master and reservoir. Will I need a special type of hose, or will anything do? Ahh Lovely

Sorry if this has been addressed recently. Having a hard time getting used to the small brake platform on my FE 550 - miss it a few times and gives me a bit of panic. I remember somebody on this site that was going to install this extender (made for KTM) and wanted to see if it ended up...

I am trying to find a rear brake guard for an 02 400fe. I know this item as a Sharks Fin but I might be wrong. I am all so looking at purchasing some filter skins dose any one know if A, they are any good B, do they fit our filters, as where i ride is bloody dusty and i thought it might help...

See Pic Firstly I have not been riding with my foot on the brake. I replaced pads in rear calliper 3 rides ago and noticed I couldn’t get the old ones out unless I cracked the bleeder and pushed on the pads. It was very hard to push it all the way back to normal position which...

Looking to interchange dirt and sm wheels on an 05 fs 650. will the caliper hit the spokes on the 21" dirt wheel. thanks, edwin

You know those plastic c-clips that hold and position the rear brake line on the swingarm? Are the screws that hold down those clips the same screws that hold down the chain/swingarm protector guard? My guard was toast, so I ordered a new one. I didn't realize that in the course of the chain...

Anyone know if ASV makes a brake lever that will work on 2001 fx470e? thanks,pete

i may have asked this before but i've done a search and nothing came up. my brakes operate only at the bars due to the rekluse set-up. i have nissin on the right and the converted clutch on the left. what is the daintiest cute 'lil switch i can fit that will give me a brake light...

Hello all I searched and came up with nothing, is there a replacement tip or extender for the rear brake out there, has anyone done this yet?? Seth

so this brake only has 1 cotter pin, and appears to have 1 allen screw looking thing on the left side holding the pin in. naturally it's extremely flimsy and stripped out instantly when i tried to get wrench on it and turn it. before i completely ruin my entire rear brake caliper, can someone...