gear

Guys, we had our first mildly warm ride of the season last week (mid 80's). I noticed that once the new 570 was running pretty hot, it struggled a few times to restart in gear. Once clicked back to neutral it was fine. Is this just one of those things with the clutch being hot, or something...

struggling to figure out whats wrong here, the bike had quickly developed a problem in 3rd gear, its like the clutch is slipping, puts down enough power to roll along, but as soon as you ease on the throttle, it slips, 1st and 2nd gears are perfect and it even seems to be ok in 4th, i'd replced...

Hello all. I should probably post a "new guy", er, post. But this is on my mind right now :-) I would like to shift my whole gear range up one gear, as 1st seems useless for me on the street (can't even imagine what I'd use it for on the track) and sixth gear tops out at about 75mph. This...

Hi! My engine make loud noise. I open left side and primary gear nut open by fingers, there´s also crack on primary gear. I need your help what else I should do or check. And what cost new primary gear?

My 06 450 fe started to make a rather loud noise in the engine and I shut her down right away and went home. Found the water pump impeller had 2 vanes missing as well as the clip to hold it. After removing the impeller I started the engine and it still had the loud engine rattle. Checked the...

Hello folks - I am wondering if any sparkies would be able to help with my Starlane gear indicator? I know it's not that necessary even on my fs650 but I got it free in a deal , and I have a Starlane GPS lap timer on already - so . My problem is that it needs to know what speed the bike...

Hi fellas, need some advice on this problem. Have just completed rebuilding my motor and refitted to bike, all is good apart from it jumping out of gear, first gear is fine but hook second and as soon as the power comes on it neutralises, no clonk bang nothing just smoothly slips out of gear...

Hey Guy's, my 08 FE450 now has 9.9 hrs on it. I was out on Sunday for a trail ride, after the first woods section we came out to a fast road section...got on the gas hard and once in 3rd the bike would not upshift into 4th, no clutch/or clutched it did not matter...had to jam the shifter back...

[IM G]http://i47.photobucket.com/albums/f167/Sid100/HPIM1166.jpg[/IMG] what would cause this to break in half just as the pics shows ....now will i have to retime the motor .ie tdc and line the marks on each gear or does the 1 mark on the cam gear...

I replaced my kickstart shaft (updated version) and sledge a while back, and have only used it a couple times. I just finished putting on my Revloc clutch and I hear a loud grinding or whining noise. I took everything apart again, and I see that the kickstart gear is grinding on the sledge...

I like many have a Berg that won't start on the electric button (Fe550e 2005). It now has an R6 starter and bigger battery, valves and auto decomp checked and starts easily with the kickstart. (if it hasn't fallen off, though that's another story) The starter motor seems to spin though and...

Anyone know if any off another bike fits, need one despo so just gonna hopefully get one from local MX shop. 25 quid plus postage for the one off of ebay sounds rediculous. Please help anyone asap if you can Ta

Any recommends for a rainy environment? Spent the last two days of my last trip soaked to the bone because my old Joe Rockets gave up the ghost and water coming in everywhere. I figure you guys from the UK must have a handle on waterproof gear...

all the kickstart gears i ever knew have a 22mm ID for the little needle rollers. but i have one here with 21mm ID so does anyone know which year and model this gear might be off? regards Taffy

I have a bit of a problem. I recently started enduro's in September and after I got the first one under my belt I decided it was time to get some new boots because my trusty old tech 4's were looking pretty sorry for themselves with holes left, right and center from constant supermoto use. I...

a friend just traded for 07 450 and it sounded like a thrashing machine. everyone kept saying husaberg sounds like that, but seemed to me to be getting louder from clutch cover side. i had a 03 ktm 525 once sound like that and intermediate shaft nut came loose and sounded just like this husaberg...

OK, 10 hours of street riding on the 05 fs 650c bike after a dealer in the northeast rebuilt my engine. I was riding on a highway 55mph and the bike shut off. No compression. After openning it up as per the dealer, I see the cam/cam gear bolts got loose and broke/ I checked the valves with...

Hi, It appears that the sprague thingy in my 03 650 is dying, as the e-starter keeps slipping. I tried to find the part (code 250 245-01) along with a bearing, but it appears that nobody stocks it any more. Instead all shops are now selling the newer part, which as is mentioned numerous...

I need a new gear lever, are there any after market levers available or is the only choice out there the stock lever?.......thanks

If anybody requires genuines Force parts such as Enduro jackets or pit shirts you best email me because stock is limited and orders need to be in months before at the warehouse. i have good numbers of some stuff but if i cant order ahead you may miss out [email protected] ORANGEBERG