fork

ive got a 98 husaberg fc400. when it is strapped down in the truck the forks will seep. only when strapped. they are now low on oil. how/where do you refill? also if empty how much does each hold? pics of oil fill location would be great TIA mike

just seen something that reminds me of a time i went on Tt and explained how you set up the front end of a bike to stop stiction. wheel spindle through wheel and forks. compress forks several times and hold down while someone else tightens the pinch screws. only very lightly tighten the...

Having read the "DOC" and as many threads as I could find, I tore into them to fix a leaky seal. Everything went well considering it was my first time. As per the DOC I backed off the rebound adjuster knob off before pulling the cap from the bike and the from the piston rod. I put my oil height...

I,m sure this has been discussed before on various occasions but can someone tell me whether KTM 48mm forks use the same seals as Husaberg 48mm....Please.

Hi, I am creating a supermotard from my husaberg FE400E '03, I already have supermoto rims (BEHR/KTM) and tyres. But now i bougt a Braking 320mm brake disc and a brembo 4 piston caliper and a FTE radial brake pump (from a 'real' husaberg supermotard) to replace the current front brake system...

First off what mm is my fork seal size,reading my manual is unclear,I don't have the WP manual.Secondly because I set my suspension relatively soft will this contribute to "blowing them" all too often.(2003 FE400E),,,Bless ya

Hello, I hope I can explain the problem. When I lift the handlebar while standing beside the bike, the fork goes not back in the normal static sag position. When I compress the fork a few times, it goes back to static sag. The differenz between the two positions is about 2-3 cm. I...

problem is to identivy the springs, because there are no marks on. My dealer has some second hand springs in stock, but he dont know the spring rates too. I have found this.: http://www.hagen-adams.de/projekt/exc45 ... lfeder.htm Do you agree? Or is there a (better) chart anywhere...

hi all have just got my fs 650 and am trying to sort the front out most of the info is in the manual except for the preload adjustment on the top of the forks, i don't mean the rebound adjustment ( black nobs ) any help would be good :?:

Well it was time for some fork service and I was curious what the different is besides the 12mm cartridge rod oil level 130mm and the oil was different than in years past, the oil had green appearance rebound stack (4) 24x,1 (1) 12x,1 (1) 20x,1 (1) 18x,1 (1)16x,1 (1)8,5x,1 (1) 16x,25 MV...

I have an 03 FE400 for which I sent off the suspension to ****'s Racing last year. They did the complete APS on the forks. I love them; way more compliant than stock and more adjust-ability for variations in riding. LOVE THEM! I just bought an 05 FE450E, and it has the factory option (?) of...

Hi, I ride a 04 FE450E. I got a spare pair of fork springs when I bought my bike from the previous owner, the box they are in says .042's, but I'm dubious as to what they really are....why would the guy go out and buy the same springs that came with the bike as new. He weighed approx...

Looking to interchange dirt and sm wheels on an 05 fs 650. will the caliper hit the spokes on the 21" dirt wheel. thanks, edwin

H i Guys, Does anybody know if a fork rebuild kit is available for my 1997 FC 501, or if there might be a KTM kit that would be compatible, Cheers.

Hi guys. Can you clear particles of sand / muck from the seals on 50mm WP conventional forks to stop them weeping? After washing and putting the bike away 2 rides ago, I notices the LEFT fork leg was weeping / leaking. After the next ride, the left fork leg appeared to be OK, but the RIGHT...

Guys , It is proving to be alot easier to try and get a KTM part # for my 03 -501 spares whenever possible because every time I order parts they seem to be wrong. I'm in Queensland Australia and order my bits from the other side ( Western Australia) of the country cause they seem to have a...

Guys, Can someone help me out here ,I need to get the upper and lower fork tubes apart on my 03 501, have got all other parts out of the fork assembly and can't see any hidden circlips etc. - I've tried using the lower fork tube as a slide hammer as such while keeping the upper tube in softjaws...

what do you guys use for yur forks. the guards that came on my bike i just looked closely at andthe are stamped ktm imagne my dissapointment on that. anyway let me know i ave the 5mm WP conventionals

What is the correct oil level height (or quantity) for the Front Fork WP 5060 Extreme Husaberg 97-99 ? Can the oil seals be removed without taking the forks apart? Thanks, Mike

Yes, well has it? /Rikard