fork

I'm 114 KG and I'm wondering what spring rate i should use for my forks in my FE650E 2004 I'm currently using 0.46 KG/mm springs. i ride manly enduro on old dirt roads and trails

does anybody know where i can get fork oil seals for a 97 fe600e,thanks

to remove the fork caps, a pin spanner is required. Does anyone know if there is a standard took, best way to make one, or does everyone buy the wp pin spanner?

Replacing seals in my forks soon. What wt. and manufacture are you boys using ? Many thanks ! Later Ron

Hi Having a fork that is to hard in slow rocky enduro,when reshimming does i need to change the mid/reb anything or does it do it if i change the base? All revalving i`ve done have been on KYB:s and a few showas both fork and shocks, having my own shock vacuum pump and a nitrogen bottle. Is...

As it came there was 40mm of fork static sag. Turning the preload adjuster on the top of the 08 forks made a little difference, but not much yet. Can pre-load be put in on top of the springs in the normal way to give the external adjustment more scope and what would be the maximum that could...

This Poll is to see what everyone is setting their fork height at. If different or other please explain. Pollo

can anybody recomend a sutible bracket/disc for the 97 wp extreme 50mm fork for supermoto use?

Hi there guys, just decided to replace the leaking seals in the forks, noticed fluid has gone a milky grey colour,looks like water in the fluid, have seperated the top and bottom of the fork, thought I would undo the 19mm nut on the base of the leg and give the internals a clean...

i found out that the fork guards from my 02 fe650e fit perfect on my 94 cr500. i'm no rocket scientist, or crossdesser in size 13 red slippers [like the ones dororthy from the wizard of oz had, man they are beautiful], but if the berg fit on the honda, the honda should fit the berg. they come...

A while back I did my first Supermoto race. I was on the grid and a couple of the riders signalled to the starter that they needed him to do something. He came over and seemed to push a button or something on the front forks as the rider pushed down on the front end. What were they doing...

Hey guys. i put the bike away for winter now and finally have time to setup the suspension properly. guess i would have had time in the summer, had i been able to stay off the thing! anyways, my 07 FS 650E has a shock spring 88-250 and im assuming the fork springs are also standard...

Can anyone clarify this mod, the 04 fork internals run three bushings plus an aluminium tube. I have been told by some one but can't remember who, when rebuilding the forks they function better if the centre bush and tube is left out. If you look at the parts manual for the 05 forks there is...

Hi All, Finally got around to pull the front out of the Berg today, the damage is only to one folk leg slider of which I have one coming from the Uk. The thing is how does one remove the aluminum casting on the bottom of the slider the leg I have coming is coming with out the casting...

gday, can anyone tell me what the factory oil height is on forks off an 06 fe450. I just done the fork seals and put new 5w oil at 120mm from top of tube. the ride is way to stiff!! whatever the height was from factory was spot on.

My fork seals are shot at and i would like to change them myself, dose anyone know where i can get a manual to help as i have never do any work on forks before. Or should i just bite the bullet and hand over the chash and let some one else do it.

I ride a lot of trails up in the Sierra mountains that are littered with rocks and logs. We even have areas that we call rock gardens that are just wide trails made up of loose rocks from 24" to 4" in diameter. To ride through those with any speed requires very supple suspension settings. The...

Hi, I am considering a fork switch on my -92 350 because it is getting quite hard to find parts and configuration info for the older forks, and a newer fork is possibly better. I have the option of buying a fork from a 1999 501 but are not sure how it will fit on my bike, and have some...

I'm inquiring about Blue Fork Guards. Is there anything like this available? If so...where can I find them? Thanks, Fritz

Apologies if the following has been posted somewhere before Thought it may be of use/ interest to someone. 2008 650FE Base valve 24x0.1 24x0.1 14x0.1 24x0.1 24x0.1 24x0.1 24x0.1 24x0.1 24x0.1 24x0.1 24x0.1 22x0.1 22x0.1 20x0.1 18x0.1 16x0.1 14x0.1 8.5x0.3 18x0.25...