fork

Hi I just bought a 501 Force 2005. I´ve heard, that it might have an adjustable fork angle. Is that true, how can i see it on the fork, and how can i adjust? I had a KTM 450 EXC before, and the BERG dies much easier in the low rpm area - can i change that? I can´t start the bike...

Folks, is anybody having an idea how to tell the 4.2N/mm fork springs (2004s) from 4.4N/mm ones?? Thanks TheEngineer

Am I correct that the stock forks (WP MX Extreme) on a 1999 FX501 are 50mm? thanks, Walter

Hello, fellow Berg freaks. Doctorcorey here. Well, I just got my 91 501 back together. It felt good to have my favorite horse back under my butt! Anyhow, I'm due to service the forks now, and I've either lost or forgotten the specs for the fork oil type and level. I mainly use my bike for...

Not been on for a bit, I've been to Istanbul to watch my beloved Redmen win the European Cup. Anyway, before my historic trip I noticed the fork seal in the L/H fork was leaking badly, oil all over the floor. I thought about trying to remove the dirt but thought sod it I'll have a go at...

There is a Tech Tip on TT under the suspension subheading that explains a possible fix for fork seals that are leaking due to contamination. Info might be valuable some day, especially to 97-99 owners! Dan

Been looking through the site and can't find torque spec for triple clamp to fork tube. I'm sure it can't be much, but would appreciate Husaberg recomendation if anyone has a source. Can't find it in repair manual or fork repair manual. Please express it 'Foot-pounds". Bike is 97' FE600E...

Would appreciate info on correct ammount and wt. of fork oil on 98 600FE. Am I correct in assuming the fork needs to be removed and inverted in order drain? Thanks in advance.

:D I have a great 02 501fe Im 215lb with gear on and forks feel too soft . I have 5wt oil , 10 cicks out on comp , should I raise oil level or oil wt any help would be great . THANKS P.s IM changing oil soon ,oil level is 130 I think .

Hi, Is the oil level limit within 100 to 140 mm on a WP 4860MA Husaberg Enduro? Is changing oil again enough or shall I disassemble the fork? Should be something like 100 hours but the fork seems to work well. Regards,

Hello there . . . I also have a leaking problem with one of my forks. The right fork of my brand new 470 (model 2002) is leaking quite heavily. However, reading the other postings om this problem, I don't really understand how to fix the problem. Maybe someone can give me some good...

I got a FC 550/4 02, and think it is time to replace the fork oil. Do i need to remowe the fork from the bike, or is it possible to drain the oil and refill it when the fork still is on the bike. Needs som advises. Lucky!

Does anyone know what weight fork springs were stock on a 2001 Fe400e?

My mate and his riding buddy both have 1999 FE600e's. My mate's has always had more front sag than the other (45mm with no preload) To get it to handle the way he likes, he's put in 30mm preload and the owner's manual recommends a max of 20mm preload. Is it bad to overdo the preload, and how...

I have never changed fork seals but my 2002 FE 501 leaks oil out of both legs. I would like to be able to do it myself so as not to have to pay a dealer all the time. Anyone know what tools I would need to do it right? Some have said to slide a film negative under the fork seal to clean out...

need a bit of help with the fork seals on my wp 43 mm upside down forks. stripped them out ok but cannot get the new seal to go in far enough to get the circlip back in it looks like the seal support washer is holding the seal to high. question does this support washer more like a spacer about 4...

I now have a reasonable understanding of the fork workings thanks to a broken top-out spring that required complete dissasembly. Previously I have spent the bucks and got the "professionals" to redo my forks to reduce deflection, complete waste of money as far as I'm concerned so after seeing...

I need to know what the stock WP forks are on my 1998 FX600. Fork Size: 48mm ?? 49mm ?? Spring Rate: 4.2 ?? I'm really not sure and I need to know in order to investigate purchasing some parts such as seals, boots, springs, etc.. Also, I am looking at purchasing an additional Berg...

Any remedies for a leaking fork seal, tried the film negative does`nt seem to work any other ideas would be welcome cheers, brookester.

Does anybody have any suggestions on fork oil and level for an 01 FX470? WP 48MM USD. Mainly used for single track and trail riding. Thanks