fork

Help! I need to change the oil in these forks and have no idea where to start. There is a clicker on the top of the forks and a bolt in the bottom. Can anyone tell me if the bolt at the bottom can be taken out to change fork oil? Thanks!

Have anyone experience of that the WP fork starts to be harsh when the operating time increases? I have indications that the WP-fork gets worn more rapidly then other brands. Have you with over 150 hours on the bike noticed this?

maybe my forks are just cursed. am now on my 3rd set of fork seals in less than 900 miles (new bike) 2nd set didn't last 100 miles. they were white brothers and were/are junk. they started leaking half way through the 111 mile sat. loop in idaho city. sat evening 40 minutes before my bike...

does anyone out there know what the oil hight should be on a 98 fc501 for a 200lb rider

I've looked all over this site, and in my manuals and can't find what the height of the fork should be(as measured from the top of the triple tree). Anyone know? I bought the bike used, and i'm suspecting it was modified, and I want to go to factory settings before I start tweaking...

any of you big fellers already shell out for stiffer springs for your 06 and still have the stock 44's around? i'd like to go a little stiffer for the dez, and if i can, i'd just as soon buy someone else's springs.

I went with the heaviest rear spring ( :idea: ) and found the preload on my forks now to be a bit on the light side, I'm 2 off for compression now......I use plastic wire straps as gauges and have found I'm using the last 3/4's of the travel...... soooo I was lookin at the KTM adjustable fork...

I was doing a basic setup check and found my forks to have 38mm of static sag, the wp book says the sag should be between 25-40mm. I like to run around 25-30mm,(to keep the fork in the plushness of the stroke) but I can't shim the springs enough to get that, and I really don't want to put 4.6...

I would like to get my fork to slide/run(?) more smoothly. Every WP ups fork i´ve tried dosn´t works smoothly, but etc the WP Ekstreme does! Why is that, and is there anything to do about it?

To those who went to the Hatfield McCoy last year you then remember the Browning Fork Trailhouses. What I`am trying to do is get a bunch to come to a ride there June or later. It is to early to know the dates. So those who are or would be interested post a comment or something. Right now that`s...

I have a 650 Berg with the smaller 20mm front axle. I was wondering if it is possible to change the fork bottoms from the 20mm axle to the bottoms found on Berg with a 26mm axle? What are they held on by???? and can a fairly experienced mechanic (no problems with breaking Berg engines into...

I have a 05 fc 550 that has been revalved for 195 lbs with 4.6 springs for WORCS type of racing and it has 7.5 wt oil in it, and I was thinking it would be more plush with 5wt oil in the rocks? Does the 7.5 wt seem to heavy for what I am doing? Thanks for the help,

A few bucks here (tires, brakes, some other bits) and there (seals, springs, revalving by Dicks) and the 600 (nee 501) is ready for action (just need some tracks to open!). One question though- does anyone make a fork brace for the WP fork? I tried the SRC brace that they thought would...

Fork bleeders available for your WP 43mm/48mm fork caps. E-mail me for details. [email protected] $10/pair....caps need to be drilled and tapped. I have it in a kit form with a drill bit and tap also. Bleeders are 1/8" npt.

Looking for front fork bleeders for my 2001 fx470e, anyone know what part will fit this bike.

THE DOC handling and suspension go have a look and see what you think! remember if you think 'i don't get it?' someone else is probably thinking the same thing so please come back here and tell me what you think. BTW, maddel gets all the photos up, cropped ready to go, links and...

Where can I find a listing of ALL the fork (make and size) that are used on bergs since 2000? For example, 02 FC470 uses WP 48U Fork and WP 50 Shock. What about the other bikes? There must a reference chart somewhere. Thanks

What lines should you run the forks on for the newer Bergs? What line do you run the 1st or the 2nd? Thanks

I have a problem reassembling the forks on my ´02. Getting things apart, putting new seals etc wasn´t too bad following the WP manual i downloaded here at UHE. My problem is simply in tightening the comp valve assembly to 25NM. I get to about 0.5NM before the cartridge starts spinning...

ok i'm rebuilding my own forks new bushes (4) new dust caps (2) new seals (2) what about the nuts off the rebound rods? the steel washers next to the seals look good what weight oil? can anyone tell me what the shim stacks are for '06 or '05? i'd like to compare? regards...