engine

This is really great news fellas. I have a way to increase oil capacity of my Husabergs to about 3 liters. Wim Dercs is racing Husaberg side cars in Nederland and he builds from scratch an oil filter housing with attachment to hook up cooler or what I'll be doing external large spin on filter...

Hi! This winter I mesured valves and opened and cleaned parts from the ignition. But after that I have problems that I can't solve. When I start the engine it works fine but when it's come up in temperature it goes down in rpm and feels like it has lost power when I give gas. But in higer rpm...

I seem to have an electrical issue causing the engine to shut down after starting. The battery is fully charged - checked, start the engine - runs for approx. 3 seconds and then shuts down like the kill switch is activated. does this until the battery runs flat. I have just finished installing...

Hi guys! I understand this forum is full of expertise so i hope i you can help me out! -A month ago i bought myself a 2001 Husaberg FE650e, FINALLY! The engine was sent to Taffmeisters for rebuild and tuning in 2012 - 2 owners ago. The engine is hard to start on the kick, because of the high...

Hi guys! First thing you do is to buy a Husaberg, the next thing you do is to find a Husaberg forum, i guess? I understand this forum is full of expertise and im happy to be a part of it! Im a 23yr old handyman from Bergen in beautiful and rainy Norway, im educated as a Engine Mechanic...

Hey all, was wondering if it would be viable to swap out a 98 Fe501 engine for a 350 around the same year. Reason being, I lost a water pump seal on a long ride and consequently washed out all my bearings / Engines pretty much done for. However, I do happen to have a 350 (engine only) in near...

Okay guys need help, rode my bike for 4 or so hours yesterday heaps of fun, 08 fe450. Got home was running fine parked it in the shed. Got it out today, washed it, then went to start it to dry the engine off. Tick tick no turn, check battery 13.3v. Kick start... solid won't budge. Hmm...

Looking for 2009 engine parts, dropped a valve at 9000rpm and now everything but the crank halves, cases and gearbox is toast. Even bits from a compatible KTM xc4 motor would help.

In need of timing chain, tensioner, slides,valves, valve seats, gaskets, etc. To rebuild my bike. I haven't been able to find any place to get parts to repair the timing chain that broke on my bike. If anyone has the knowledge of where to get parts please let me know. This is considered a rare...

Hi guys, I have an old '86 KTM 500 MXC thats in really poor condition but the engine is good. I'm having trouble chasing up parts to restore it but being a left hand kick start, I was told that I could possibly put it into a 2008 'berg frame. Any thoughts on this? Has anyone heard of it or...

Official Husaberg Engine Oil Level For Husaberg 450 - 650

Engine Stands. Does anybody use them? Especially Professional Techs. Are they helpful or just one more thing to deal with? I have been looking at a few but the Tag Z, $105.00 U.S plus shipping which may be alot, seems to be a good value. There is the Fly Racing Stand but it doesn't turn...

any thing you got for replacement parts to piece the berg back together would be appreciated. mainly looking for head/cylinder and also the speedo/hour meter display

Found this on a friends 570 from -09, it is the right top engine mount. Take a look at yours when you have your eyes in that area.

With no history on the bike except that it's a bit hard to start and with an upcoming tear down/status check I have the following questions: 1. I have read here that the cam follower bearings often go bad and should be replaced periodically. Is it enough to inspect them or should they be...

Hello everybody. This is my first post, so i apologise for any inconvenience. 2 years ago i bought from Barcelona a second hand Husaberg 570 2010. I drove all the way from Barcelona to Athens, Greece (South of France, Italy--->Boat to North of Greece and finally Athens.) The trip was...

Hello husabergers, I'm looking for parts for very old FE400 (pre 1999)? I'm interested in Rocker Cover with rocker arms (200013); Valve shaft with gear and water pump; gear wheel crankshaft/clutch hub; if you have and wish to sell them - please contact me to aslabada <at>...

Bought an 08 450 fe Berg and put less than 10 hours on it before the valve dropped into the cylinder, wrecked the head, cam, valve cover and debris dropped through the timing chain cavity to the bottom of the case... looking to buy used engine and just swap completely Thanks all!

Guys, can anyone point me in the direction of someone that may sell carbon or similar engine covers fro the 570 Berg....can seem to get a line on them anywhere Cheers

Hi all, I've acquired a 2005 FE450 in large lumps, seems mostly good. Think it was taken apart pretty much for a clean and service before the last owner lost interest. Plan is to assemble it, do just one enduro and then strip/rebuild the engine fully over the winter. The engine oil wasn't...