bearing

Anyone know the part numbers of these? I have the Husaberg p/n, but I'm looking for an SKF (or equiv.) number. Thanks, parsko

I had to make a choice between 1) fiiting a new Nachi Japanese made bearing to my existing single bearing balancer, or 2) grinding a 650 twin bearing balancer to the same shape as my 400. I went for the easy option 1) and fitted new bearing, it was rated at 17000 rpm with seals removed running...

Hey! Can anyone help me out on were to get a flywheel puller in the uk (im in glasgow scotland).? The thread on the flywheel is 26mm x 1 and they dont seem to make a tap that size or id have made my own puller by now LOL The engine was gave to me after being "seized". But it does turn...

just a request to our regulars to tell us whether this is a retro fit for all the old bikes. photos etc boss? bikebarn, all the dealers we have here? regards Taffy

Why does the left main bearing have a bearing seal? The entire engine is in the same oil bath so what function does this seal have? Same for the reed valve, all the mechanical parts use the same oil so why the reed valve? Just wondering.

Rocker-arm roller bearings and pins This is for all '01 and '02 machines with rockers: Part# Intake: 200 281-01 and exhaust: 200 283-01. An upgrade is VITAL or continual replacement every two years of average use (as a precation). The factory modification was to increase the pin size from 7.6mm...

i, maybe you know i have a 628 engine to be regenerate. i've read something about the main ballbearing which often fails.. which bb should i buy to replace them?

hey every one, bought a 2003 fs 650 a week ago, rode it for 3 hours went to buy some oil and a filter and it seazed up on my way to the shop, what a bugger! the big end bearing melted, i have bought a repair kit with a rod, crank pin and bearing, but the crank halfs are slightly burred over and...

My question is my 2003 501 FE has 110 hrs on the same crank bearing.....what kind of bearing is it?? and also when should i change? Thanks for any input

Ok well i have another question after reading all that! My 2003 FE 501 has what kind of main bearing??? AND it has 110 hrs on it and has not been changed as per manual. I am the second owner, the first was a vet rider and changed oil regularly with the good stuff. I change the oil every other...

I have Berg -05 650E with supermoto setup, 12hrs when I bought it, now 19hrs and clutch side main bearing gone.Clutch case was also damaged in point where oil is fed into the crank..crank head left skid marks to clutch case oil channel.When you shake the crank head you'll find huge radial...

SO, how do the bearings come out of the swingarm? Are the pressed out? Can they be hammered out? I got the swingarm out and off the bike easy peasy but I can't even remove the rubber seal. Advice please... :oops:

All, I am working on my 95 FE600. After disassembling the top end, I noticed that my cam followers were missing some needles. Intake: 10 needles Exhaust: 14 needles I know there are two designs, one for the newer style, one older. Mine is the older. Question: Can anyone (dealer...

Hello UHE: My FE501e'02 is in maintenance. I'm going tol open the engine to replace piston and cylinder. In same time, I'm going to check counter balancer + ball bearing + circlip + shim ( Manual part 2002 pag. 30 pos. 4 cod. H21024801 ). If you notice, in same manual there is a *4 pos. with...

Just started putting my 2002 650 block back together and messed up already :D I switched to roller bearings for the mains, heated up the inner bearing races ( hope this is the word, i mean the inner things on the bearings wich you can remove from the bearing and go on the crank), fitted...

O.K. this is what I need help with. I have a 2002 470 that blew up a counter balancer bearing and I dont know exactly what was in there. Is this bearing suposed to have a circlip holding it in? Also the manual states that it should have a double bearing balancer, and it does not. Is this a 2001...

Anyone know why the counter balancer driving shaft is a two seal bearing? It seems that the seals would prevent oil from getting to the bearing. Has anyone removed one or both of the seals?

First off.. have been reading here for some while, i am so impressed with the amount of information here.. The story is as follows :) I wanted to go Supermoto racing, but have newer benn on dirt before, so bought the FE400, and then the FE650 on impulse.. dumb idea, newbee on a FE650, cost...

Hey Guys, need some input with a "bearing rattle" that seems to be coming from my bike, just behind the clutch basket. I have worked around the bike with a screwdriver to ear & the most noise seems to be coming from behind the clutch cover at the rear of the engine. I've got perfectly clean...

Would any kind member happen know offhand some bearing size information? (possibly pt. numbers, but measurement would do) I keep my bike an hour from my house, so I can't measure it at the moment, but have a bearing supplier close to home. So on to the information- I bought a set of wheels...