600

So I'm looking at a 1999 FS 600 with just a little over 600 original miles (ie almost brand new and it looks it). I'm well aware that parts are pretty scarce for these bikes but my question is how reliable are they? This one happened to be bought as an over stock item a few years back by an...

Hi all, Not a Berg i know but i thought with the wealth of knowledge on this forum someone may be able to help. 1995 Xr600r , it`s very easy to start normally first kick, seems to run and idle ok most of the time but after a run and let it idle it some times just cut`s out, when it does it...

Can anyone tell me is it possible to put an electric start on a 2000 fc600 ?.

hi all i have just bought a 98 fc 600 this is my first berg :D . always had jap up to now. my bike back fires at low rpm and gets hot very quick has anyone got any ideas. i know from my crf 450 that backfires can occour from exhaust leak.(i dont have one). or incorrectly set valve clearance...

Hello I've found 5 Husaberg rod kits for the FC/FE600s! they are OEM, come with little end bush fitted, a big and pin and bearing. they are 250 each which is what they were when Husaberg stopped making them. let me know if you want one! remember, no more are being made..... regards Taffy

I'm closing in on a final order for getting some OEM 600 rod kits made! If anyone is interested I'm asking to register their interest with a £10gbp deposit. http://cgi.ebay.co.uk/ws/eBayISAPI.dll? ... _626wt_698 the £10 deposit is really small but it stops the ********! I hope those that...

Hey every one i just traded some work for a 1995 Husaberg 600 fe. Its in pretty good shape except that it broke a timeing chain.So i pulled the valve covers and noticed that one of the jam nuts was missing and anouther loose. I found the nut was under the cam pulled the rocker box off found the...

Hey I road my 1998 600 fes yesturday and it lock in second gear and would not come out. I got home and took the cover off and got the selector thru the gears again but dont want this to happen again when riding a long trail. Is there a part I need to replace or do I just need to do an...

Sense you guys seam to know everything Husaberg here is a question. I snaped my throttle cable today on my 1998 600. My question is I can probably get a new one from motoexotica in California, but does anybody know if KTM cables work or even any Jap Bike throttle cables may work. I have no...

i am currently working on my husaberg fe 600 and it back fires and is real hard starting. i pulled the flywheel cover off and found top tdc and the flywheel marks dont seam right. I have a pdf i found off this site and it shows the flywheel in a total different location than what my bike shows...

Can or is a sleeve aval for early 600's? and or anybody have one they want to get rid of? I had an intake valve com apart ant cracked the cylinder.

is there any interest in new 600 rod kits being made? pin, bearing and rod, no little end required. cost will be 300gbp or 320 euros or $480. I'm only getting a dozen so I guess: "speak now or forever hold your peace"! I'll go ahead if I can get 6 orders. the FC501 rod was 4mm shorter...

I have my buddies 94 600 Fe? i think, and it needs an oil change, what oil wieght is best? does it use the same oil for the tranny? If not what oil is good for the trannsmission? Where is the drain plug? And also where is the drain plug for the radiator fluid? Thanks

Hi guys, I am trying to reserect a Berg into a SuperMoto commuter and funds are tight. Along with everything else going on I am going to have to rebuild the stock DelOrto which I have torn down and cleaned. I would love to go with an FCR conversion but that is going to have to wait. I have...

Hello All, I have been a long time anonymous luker on the site and am trying to gleen as much info as possible. I purchased a 2000 Berg 600 electric start a few years back. As with a great deal of 'auction' projects it wasn't quite what it was described as, ah well - that is par for my...

any one got part number (210 057-01) gearwheel cranckshaft/counter balancer to sell me ?

Hi, I am New To This Forum-But Far From New To Motorcycles=) I Have a '96 Husa 600. My Plastics Are Fine, The Bike Is Great, Nothing Wrong With Her Anywhere. Not Even A Hole In My Seat! Anyways My Question Is Can I Adapt 2000 Style Plastics On My Ride? I Am Looking To Update The Look Of My Ride...

Hi all, i'm the new guy in town.I've always loved the husaberg bikes but never thought i'd ever get round to owning one.I currently own a Honda Dominator 650 which i converted to supermoto and love it but this 'berg slapped me in the face and shouted buy me!!!! Well it was reasonably priced and...

I have been tinkering with the timing this afternoon. With the timing light and at idle the timing was about an 1/8 inch above the mark. I removed the flywheel and moved the stator about 1/8 and the timing light now shows it hiting the mark. The problem is that the idle is a bit erratic and the...

I have HUSABERG FE 600 year '99 problem - no spark. maby broken coil system but maby stator. qestion...whats parameters for test coil system and igition stator? Ohms? regards Raivis Latvia