600

Hello everybody, its my first post here as an user, im reading sometimes here some useful help. But I have a problem wich I want to clear. I bought not long ago a keihin FCR 41 carburator, on ebay form USA. Now ive mounted it already on my bike but it doesnt run "smoothley" or just...

Hi their, got a fc 600 with built in de-compressor on the kick start having real trouble trying to start her from cold. Is their correct technique i should be doing to get her going? Any tips or help will be much appreciated Many thanks in advance Walker

Hi Would any of you guys out there no the setup for a Mikuni TM40 pump carb for a 1995 Berg fc600. Have just aquired the new carb but when attached to the engine causes back fire through the carb. i know that this relates to fuel starvation as when I attach the old Dellorto the engine runs...

Greetings fellow berg maniacs I have a sick 98' FC 600 and we've narrowed it down to the stator. I'm just wondering if anybody here has purchased a replacement stator from www.electrexworld.co.uk and/or if you have heard any good or bad rap about these units? I can either get a genuine...

This summer there was a while that I didn`t use my Husaberg, earlyer this seson the bike went just fine without any problems. But when I was going to go for a spinn in august, the bike didn`t start. The bike had been standing for like a month. I checked the plugg, and it gave sparks when I...

Hello I am not sure if I remember correctly as my bike has been apart for a while so can someone refresh me on the position of the cam when putting on the timing chain? Also if anyone knows the torque value for the head that would be great. Thanks

Hi mates, Actually I'm riding the following original carb setting in my 1998 FE 600. MJ- 195 NJ- DR 268 Needle- K51 N. Clip- #3 PJ- 40 8original is 35) SJ- 45 Mixture Screw- 1&1/2 turns Riding altitude is about 2000 ft. I think this must be very conservative setting because I do...

This winter I haven`t used my Husaberg. So wen I was going to take it out from the garage not long time ago, I discovered that the clutch has lost it fluid (the clutch lever was 100% "loose"). The problem was a hole in the clutch line. So I bought a new line, and are now trying to fill on new...

Hi folks, What should the standard gearing be for my 2000 FC600? Mine came with a huge front sprocket and a small rear sprocket like it might have been used for supermoto or something. I barely get it out of 3rd gear around the local tracks (Still another 3 to go!). Cheers, Ross

Hi everybody! I have to change engine oil of my FE 600. 10W40 API SJ Synthetic Oil could be a good option?? Brand is REPSOL, but qas could read, It is not fully Synthetic. Thanks for your help.

hi everyone,just bought my first berg and i love it ..i don't know if this is a problem,but the bike back fires with a flame..is this normal.i have only ever had two strokes before... would be grateful for any help/comments.......thanks

Hi everybody, My FE 600 (1999 model) has the following problems. Consume oil (500 cc each 500 kms) I can fell that vibration is increasing I was talking with same mechanics (they know well Husaberg) and they told me: Vibration increasing means that crank shaft is getting unbalanced as...

I've just watched the White Star 1999 World 500 MX Review. I had heard that Joel Smets bike broke in '99, but I didn't realize how many times. It had to be frustrating to lead that many races and the last 10 minutes, the bike starts stuttering. Does anybody know what really happened to it...

I am a new owner of an older 1996 600 berg. I just had my carb rebuilt by a mechanic down here in mexico and he and I couldn't get gas to the cylinder after we hooked everything back up. We actually pulled it behind my truck last night and it fired up and ran well. I want to know if there is a...

I need help!! Could someone recommend me which carburettor will fit to my FE 600 (1998 model)?? Many thanks.

Hi everybody! I would like to know which model and size of Keihin carburettor will fit to my husaberg FE 600 (1998 model). My Dellorto is already over!!! Many thanks in advance for your help Chichor

My CDI ignition module died recently in my 600fe and the best I can find that I can afford for now is CDI out of a 650. Will the mapping in this module be near enough for my 600.

I have just become the owner of a '99 FE600. Picked her up last nite. Went for my first, and slightly scary ride this morning. I last rode a '97 KX250 2 years ago, so the power is very impressive. :D Bike won't start with the button. But I need to change plug and give it a good all over...

Not sure if it was a good thing, but I just bought a 1992 600 Husaberg. I would like to put lights on it and make it street legal. I'd assume it might need a larger stator. Recommendations on electrical parts sources and lights? I looked at the fairing/double headlight conversion being...

I'm new at this forum. Bought my first husa yesterday and I'm planning to rewire the whole bike. Does someone have a clear diagram?