600

hi guys, does anyone know where to find photos of Smets's fc 600? no matter what year it is...

D.LIneaweaver, you talked with moto1020 (Ryan), RE: my 600 he's re-building for me. He said you might be able to help us out. From what he said, we can get the correct cam, but it's the NEW(supposed to be correct) rubbing rocker arms that's holding us up. :?

I'll just throw this out there for anyone to munch on. Lately, I've been noticing that after I ride a while, sometimes my bike will smoke rather badly for a minute on hot startup and then stop smoking. Oil smoke. I've also seen fluctuations in my oil level, as if oil is pooling up somewhere and...

Fe600 that is.... I spent some of my spare time rebuilding Tut's old '98 Fe600 and then traded him a '72 Olds 442 hood for it. I went completely thru the engine then decided to go first class and send the Dellorto to Dale Lineaweaver for his special mod job. That turned out to be a good...

Hi I have a 99 600 FX basically all rebuilt [bought as a basket case ] anyway she starts no problem when it is cool ,push the button and it usually fires to life first time. The problem is once it gets hot it will fire but as soon as you apply the throttle just a smige it flames out and will...

Hi all, I just took my "new" FC600 (2000) out for the first time. Rode between 9500' to 13,000" for several hours and had none of the same "richness" symptoms as with my 400 VOR.... Is that typical for bigger-bore thumpers..? Any proven re-jet specs for this elevation?? Also, I noticed a...

Hey guys, Earlier this summer, while riding at the sand dunes, one of my valve adjuster nuts decided to come loose and get stuck on my cam gear. Well that broke the tensioner, the cam gear, and ripped a 1 1/2 " hole through the entire top of my valve cover. Now I'm stuck without parts. I'd like...

HELLO FELLOW BERG RIDERS I am looking for the left inner case for a 600 fx all years from 97 -2000 with electric start will fit .. The crew a Moto exotica in formed me that these motors are all the same , so any I mean any help would be really GREAT !!!! I bought the bike off ebay and the...

does anyone know of a cross ref for a 1999 fe6003 clutch cable closest dealer with one is michigan I do not want to overnight one from them ANY HELP ???

Looking for a clutch cable any one know a cross ref or a cable I can get :?:

Hi all. I'm Italian rider (Catania). I'm sorry for my english (very bad). Last week i'v seen an Husaberg Fe 600 '99. Seeminghly bike is good. The engine drives well, and there is only a little ticking from the valves. The bike has an exhaust under the tail, and often there is a crackling e...

hi all, i am not riding my 600 for 2 weeks now due to failure. it starts really easy by 1 or 2 kicks but it runs and feels very week-poor-unstable (note that it revs all the way). it backfires after 1 or 2 minutes and dies. just like when you have air leak from somewhere. i checked it and came...

Hi all, I have just purchased a tidy 95' 600 enduro and am about to register it so I can use it on the road. I'm an X motocrosser and as a result of not being very good, I suffer with being minus a couple of discs in my lower back, I am therefore struggling to kick the thing over. Does anyone...

Does anybody know how thick the top end rod bushing is supposed to be on a 95 and later 600? I just took mine apart and there was no bushing but i am told that there is supposed to be. the piston seemed really loose on the rod and there was some bad wear on the wrist pin so maybe it was left out...

Hey guys, Just wondering if anyone knew who specialized in working on Husaberg heads here in the U.S. and the average price on a valve job and decking. Also, does anyone know who makes pistons for a 600 and their prices? thanks alot :D

i am thinging of changing the carb of my 95 fe 600 sm. i am still a student in university and my funds are limited so the 41mm keihin FCR is a bit expensive to me. i am thinging for a 41mm dellorto with acceleration pump which costs in my country about 235 euros (1 euro more or less equals to 1...

hi guys,my name is paul and i am from Greece. this is my first post and i hope that anyone of you would be kind enough to help me. i own a 95 fe 600 sm which has an 38mm dellorto vhsb. it runs great but has a significant problem in starting when the engine is cold and the enviroment's temp...

Someone on Ebay is parting out their 1998 600. It might be a good chance to get what you need. Evin

:?: The old beast desided that it neaded new rod and main bearings, i got that taken cared of putt hear back together,now the compresion is low and it smokes. So i think it neads a bore jobb and new rings,i got a malcom smith high compresion piston in it(wiseco?) any rings out there. I...

Can anyone give me any tips on starting or bike setup for starting a 1999 model fe600 (no electric start). The bike has been fitted with a manual decompression system at the cost of the automatic decompression. This is the only problem I have with an otherwise fine motorcycle and will cause me...