600

Hi all had the berg out tonight for blast runs very well but small tick of tappets so Gina check them any one know were I can get the settings thanks

Hi all was reading that my engine does not have a proper oil pump can any one explain how it works as it sounds like bad thing lol don't quote me but I think I read some were it has a Reid oil system :)

Hi all new on here just got my first Husaberg and it's a hoot only thing I wanted to do was set the Carb up what is the standard start setting on the air mixture screw On the carb and I can work from there :)it's 1993 model

Hi looking for new rear mud gard and tank rad gard decals can they be got Easley ?

Hi All, 1st post here. I have a buddy that's owned a 1999 FE 600 since new. It has Many, Many hrs. on it, and has served him well, but its time, or past time to renew the valvetrain. Is there a source for parts for this bike? Top-end parts, Valves, seats, etc. Thanks for any info!!:)

Hello, my name is christian and I life in France. I bought a FE 600, but the electric bundle was cut. What is that somebody would have the plan to repair it? I thank you

Reassembling after doing the top end. Changed frames, repainted. I tested with a car battery the first time and the motor spun fine. It took a few minutes after I pressed the starter button before the starter began spinning the motor. I also thought it was odd that when I turned the key to...

Hello all husaberg lovers. Im new to the bike and fairly new to the forums. I've been having some problems with my 93-94 600fe. After testing my factory stator (to taffymeisters specs) I found out that the stator was bad. I chewed on the $500 price tag for a rebuilt... then I looked online and...

hey, new too both the forum and bikes , havent been riding for ten years, last one i owned was a moped so alot has changed since then :-P so here is my problem, i cant get my clutch to work, i have put new wear plates in it , new oil, backbled it , no clutch, I can pull the lever and...

I have purchased a 07 KTM RFS cam, decomp, bearings, water pump seals and cam sprocket to use in my 97 600 Fx. The cam measures out the same except where the cam sprocket bolts to the cam. Its a few mm's further away from one of the lobes. I am still using the aluminum cam sprocket which...

My 99’ FE 600 has a leaking fuel tap. The fuel leaks out from the lever and drips down on the top exhaust pipe. It leaks both when the valve is open or closed, bike running or stopped. I looked through the parts manual to see if there is some kind of gasket inside the fuel tap, but the parts...

New to this site, built a J & M flat tracker back in 97, engine came as a factory built 4 speed with no kick start, hardened rockers for sustained high rpm use from Dale linaweaver. Ive been in high atus for 10 years from racing, need to be fast tracked on aftermarket parts available in the US...

Hi, I'm sad to say that it's time to sell my bike It's in great condition, new battery, current tags , works performanc, computer , new filters. Bike hauls. Located in So Cal $4500.00. E mail me at [email protected] Thanks Diane

Hey guys, I just broke my shifting shaft off that connects the shift lever. I found one on Ebay for a 1996 600 fe will that interchange with my 1998 fes. I think it will work but want to make sure.

Hello. Just bought a Husaberg Enforcer 600,98 mod possible. the quad has a 01 650 engine fittet by the previous owner in sweden. an imported to norway in 2002 an parked in a garage until to i got it one week ago. Engine parts are easy to get in norway but the rest is hopeless,the norwegian...

Hi i have a 95 husaberg fc 600 it starts up with choke from cold in about 3 kicks but when the bike is hot it can take upto 20 kicks to start it again. any ideas?

now I wont bore you to death! and how much is being spent???[attachment=2]1374671623791.jpg[/attachment forks are leaking fuking great!!!!!!!!!!!!!!!!! removed the spring from the new wp rear shock fuking thing snapped in half and that was using a c spanner to!!

just wanted to say hi, I bought a berg,,but its fooked,,[attachment=0:3de80zyi]untitled.png[/attachment:3de80zyi] I bought her a couple of days ago it was on flebay,she was moted but no tax,,,,was going to tax her then take her out but there is coolant leaking in engine cases,,,,*******!!,,I...

[attachment=0:qtkm3la9]husaberg.jpg[/attachment:qtkm3la9]Hi i have recently purchased a 95 husaberg fc 600 it was running fine and started fine just needed a valve adjustment .I got on with the valve adjustment 1mm both intake and exhaust which i got told is right?. started the bike up it ran...

Hi everyone, new to the forum, just purchased a 99 FS600. It starts and idles fine, but stumbles when you give it gas. The owner bought it new and said it never ran right with the stock carb, Edlebrock. He purchased a Dell Orto PHM40 and said had it jetted. He was cleaning the carb and broke...