This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

2010 Keyed Ignition

Joined Mar 2010
2 Posts | 0+
Has anyone seen a built in keyed ignition system on the instrument panel on the new 2010 FE models? I swear I saw a photo of key slot built into the instrument panel but I believe it was on a non-US model.

I have 2010 FE390 and have gotten it plated. I was planning on doing short rides to grocery store, friends houses, etc. but I am a little timid with leaving it in public parking lot when all you have to do is a push a button to start it.

I know I could have one third party wired in but that just wouldn't look right and probably easier to bypass.
 
I had my FE570 plated and just used the keyed ignition set up from the newer KTM exc models. Works great.
 
I have a 2010 FE450 - Australian model - and that does not have a keyed ignition. I did get two keys with the bike and they lock the steering, which would be OK for a quick dash to the shops etc.

I have been meaning to fit a discrete micro switch that would cut off the fuel pump as bit of a back up. Have not got around to doing that yet.
 
I pull the seat off, unplug the connecter that goes to the power relay.
I just hope the theif is not too smart.
 
You could also just pop off the seat and pull out the fuse for the fuel pump. Bike won`t start without that.
 

Register CTA

Register on Husaberg Forum! This sidebar will go away, and you will see fewer ads.

Recent Discussions

Recent Discussions