timing

:):)

Take a look at the PatATi engine: It is a simple two stroke (a piston, a crankshaft and a connecting rod). Without rotary valve and without reed valves it has asymmetric transfer and intake like: For more : http://www.pattakon.com/pattakonPatAT.htm#PatATi Thanks Manolis Pattakos

I have question. What tools do you use to rivet IWIS cam chain? Husaberg OEM tool? Maybe KTM tool also works?

Hope someone can help me, with the valve timing set up, need to know where to line up timing marks, just bought this bike as a non runner, found the timing tensioner guide has come adrift, nut come off broke the rocker cover and possibly knocked out timing as it won't start. Thanks in advance...

H20004502 can anyone know what you can use analog. the mail to Russia. with the number please.

Yes I am that wierd snow guy and have my own set of issues! :mrgreen: Last week it was -20deg F. I fired up the 2010 FX450 and let it idle up to operating temp. Then two miles up the trail it died. Upon inspection I found the timing chain guides completely melted and totally wore away with...

Hi all. Timing chain snapped in my 650. No damage to piston or head, Valves and everything ok but when the chain broke it punched a home in the valve cover. This was between the cam chain and gear at the top. No idea what it is. Any gurus know what it is? Help much appreciated :) John

I bought this bike not running . It had carb. problem's I put a new one on it and it started up and ran great. Now it just depends on if it wants to start or not. Some times you choke it kick 3 times and it starts then the next time you might kick the thing twenty times before it will start. I...

HI, Could someone explain in depth and in detail how one is to setup / handle / load the timing chain tensioner on 2009 FE 450 Husa? The manual reads on page 124 "Press the timing chain tensioner together completely." Next it says "Place two spacing washers or similar aids next to the timing...

My 2011 FE570S needs a new timing chain. Iwas wondering if I get a new OEM or is there a better aftermaket one...?

I just replaced the timing chain on my Husaberg FS 650 02. I also replaced both cam bearings, the auto decomp and spring to the modified/newer ones. I also changed the cam chain tensioner blade to the black one. Snapped the knob of the cam chain tensioner. The problem however, is that when i...

Hi guys! I wonder if someone can help me. My timing chain tensioner broke, pulled it out and saw that the moving part, the shaft which has those many teeth is okay, but the small trigger part ( which is supposed to stop it from moving) of it has its teeth broken off. I don't know if that small...

I have searched and searched and have not been able to find out how to time this motor once it has been disassembled. I dropped a valve and after head work etc I'm ready to reassemble. this is my first Husaberg and can't find any timing marks to help me. My concern is the balancer? I had to...

Hello, I'm going to change cam chain, the new one that I buy is with the split-spring clip from Iwis. In manual from Iwis is written that closed end of spring clip must look in the way of rotation. I try to look for rotation direction through oil cap and looks like the cam chain travel goes...

Hi. My 2005 fs 650e has been having problems starting with the e-start when the engine is cold. the stater just spins and when the engine is warm no problems starting. I removed and disasembled the torque limiter gear and I found 2 cup washers instead of one. should I remove one and install a...

Hi, The inevitable happened :( My timing chain on my '07 Fe 550e broke and wedged in somewhere ...I will not disclose how it happend :oops: It has 8000km on and 190 hours. I'm replacing it but would like to know from someone who did it before, if there is an easy way of doing it. I will...

I opened up the side of my 01 fe650 to try to fix the starter sprague. Pulled off the clutch and lost my timing. The crank gear and counterbalance gear do not have the dots punched on the gears. How do I figure out things to get this set up properly. Once I find it, I'll mark the gears somehow...

Hello dear, just opened clutch cover, put engine in TDC, and see that my timing is one tooth off, at least I think so :D I was checking by drawing from Owner doc's, can you please check am I write and do I need to adjust the timing, should I remove cam one tooth back? thanks in advance

i am currently working on my husaberg fe 600 and it back fires and is real hard starting. i pulled the flywheel cover off and found top tdc and the flywheel marks dont seam right. I have a pdf i found off this site and it shows the flywheel in a total different location than what my bike shows...

Hi, I have some problems with setting the right ignition timing on my old (should be 1998) Husaberg FC501. Can't find any info in manuals and it's not clear how to find the mark on engine block for this type of ignition? Also, any advices how to set the right timing for engine with electric...