stator

i have a 2000 berg fe400 i have 155 on the green and black and nothing on the red abd black on the stator does any one know where i can get a rewound or new stator in new york or do i have to go overseas

Hey guys so i got a rewound stator from sparks after i sent him my cdi and stator after he rewound it he ran up the tests and said it was all good and shipped it back to me, so i mounted them up and still no spark? my question is what else could be wrong if the cdi and the stator were tested...

Hi, I have been having some problems with my FE400, It was running fine but never was able to start it on the kick start. Anyway it started ok with the bigger starter motor and ran fine but then it cut out a few weeks ago, checked the stator and found out that had gone. Replaced it, now there...

Hi, I`m sure this has been covered before but i`m after a new Stator for my FE400 2002. This is my first Berg so a little unsure which way to go. I`ve seen oem sem units,rewound sem units,exchange units,some guy called Sparks, Electrex units,Westcountry Windings that do similar units...

I have a 1997 FE 400 Elduro. Sparks just did a fine job of rewinding the stator, and I want to be sure that the timing is correct. The manual says only to release the three stator screws slightly, turn the stator to 33 degrees BTDC, and retighten the screws. Fine, but how do I know when...

I need to pull my stator to get it rewound. however, i don't know how to get the flywheel off. looks like i need a puller.. any help?

Hello. It is possible to fit a complete electrical system from a -96 501 on a 400 -01 engine? On the new engine i have the flywheel and from the old one the stator and CDI I am bying a 01 400 engine and are going to mount it in a older chassi and have the CDI and stator from the older bike...

hi im new to this site but not new to husabergs i had a 650 2 year ago and sold it missed it so much i got a 2003 400 the problem is theres water coming from the stator cover is this bad ??

My SEM stator is gone, i'm having it rewound. Will "new" stator help me with hard starting? I couldn't start the bike with electric start and sometimes i had to kick it couple times to get it started when hot.

I have 2 engines, 1 I am rebuilding. One of the engines (the one in rebuild) is equipped with a MX-stator (3 wires) and MX flywheel. The other engine has a sparks rewounded normal stator. Is it possible to use the normal stator with the MX-flywheel or should I pull the normal flywheel of the...

For your perusal! Answers and opinions on a postcard please......

hey ive got a 2002 fe 650 that needs a new stator, from what ive seen on the forum id like to get the motoplat one but im in sydney so is there anyplace in aust to get one rewound or sould i still try and get a motoplat stator. thanks

Just installed my stator that was rewound by sparks... I still have no spark though :( ... I have a 99 FE400 What values should I look for from the CDI?? I tested the ohms on the stator and they were at spec. I tried disconnecting the orange wire from the kill switch also...

I know this subject has been beat to death but realy dont want to order a expencive part if i dont have to. i was riding on friday for about twenty minutes all was great untill nothing. no spark. tryed a new plug nothing. pushed bike about a mile. untill geting a ride to camp. then i started...

There are two on ebay right now, does a 99 fc501 fit a 94 fe600? It looks like these are aluminum? (Mine is plastic...) Thanks

Greetings all, I am new to here and new to Husabergs (just bought a 04 FE450). This is the most wicked registerable bike I have ridden. Heres the deal, I cant take my Husa for a ride till I fix the missus bike (financial sponsor of my new bike !). Her bike is a KTM 400SC...

Hi to everyone a little advise is wot i am after , i have a fs650 2002 with the sem stator i purchased the bike last week ,as it had been standing i didnt pay a lot of money for it (actually it was a giveaway). i stripped the bike down for the usual checks and when i removed the stator cover...

i know its all on here somewhere but its making my brain hurt looking for it, what are the values for the stator windings on a 2000 engine? the stator is in the outer cover. i suspect it may be kaputt. there is a tale with this if anyones intrested, i got the engine to upgrade my 97...

My friend's 00FC501 berg is in need of a stator. The current one seams to be flaky at this point. Dealer quoted $350 for a new OEM.... What are the options, other than the above $350? Thanks! PS: No, I didn't search, sorry. So amuse me. :)

I have a 2001 fx-650 that has been a pig to start since day one. I recently had my stock stator rewound by sparks. Yesterday i went out for a test ride, it was 40 degrees F. I kicked thru with choke on a few times, shut off choke , found tdc and she started FIRST kick. This bike has never done...