stator

If it fits, will the spark timing be correct? thanks for any advice

See topic title. It is just for having a backup on my '03 since I can buy a NEW SEM stator which fit's the 93 tot 97 bikes for really cheap ;)

First time I heard of these guys. They are in the UK and pretend offering a better than new SEM replacement stator. Anybody tried their products?

Hi all, I am putting a light on my 02 470 fxe. I was checking the voltage from the bikes stator and found only 8.8vac, once hooked up to the regulator/rectifier, I had only 9vdc. When I increased the engine rpm, voltage would rise to 10.5vdc, but as rpm increased, the voltage began dropping...

Hello all, Sorry for this new topic regarding SEM Stator but I have read so many posts concerning this subject that I'm a bit confused now, so if anybody can help me it would be nice ...Here are the data of my problem: -I've got a FSE 650 2002 that i do not use very often (3000 km only)...

Just ran across this on Ebay. http://cgi.ebay.com/KTM-Husaberg-Trail- ... dZViewItem

Hi Guys, My 02 -03 FE501 seems to be having stator troubles again. It is reading fine on all checks accept the red to black wire- it should be 3K ohms , it is reading 1.6Kohms - still runs fine but won't charge the battery. I'd like to try to retro fit the KTM stator into it - can you guys help...

Hi All, Just like to say that Mr LeFrog is the lucky candidate for the free rewound stator. To those who didn't see the post I put up a while ago I said at the time I am very close to my 1000th SEM rewind and as a gesture I would donate it to member of the UHE site. Regards Sparks.

I have a 2000 FC501 and I got shocked (No PUN intended!) when I called the local Husaberg dealer to find out a New Stator is $440 plus tax and shipping!!! I found a used one from a 2002 Husaberg 470 with the extra 2 yellow wires and 1 blue wire. Does anybody know if this will fit in my 2000...

I just bought a used 2000 FC501 and it won't start. It seems to have a week spark and only every couple of times that you kick it. I've read about a guy named "SPARKS" but don't have an email, phone# or address so I can contact him and send out the stator. When I took the OHM reading it read...

Hello everyone i'd best introduce myself to these forums as i have not done so yet my name is Kevin and i live in Meadowbrook, Brisbane, Australia I have a 2000 model fe600e in very good nic with about $5000 worth of aftermarket parts. It's a great bike but i have had problems with the...

I did the first oil change on my 02 fe501 today. I used the Rotella T synthetic 5w40 in a gallon jug. I filled the bike with oil till it reached about the middle of the sight glass and then started it and let it run for about 30 seconds. I let the bike sit for a few minutes and then checked...

Hello My FE501e '02 is in engine maintenance ( Piston, rings, etc ) :D . Actually my bike has its original SEM stator more than two years I beleive it will to die in any moment :? Which is the best way you guys recommend * Replace for a new one ? * ktm part Stator Loose 13 cod...

Should have been at the Moab Force ride last weekend - it's only a few hours away, but Lineaweaver Racing was "crafting" my Dellorto in CA....... I was "jonesing" real bad. So.... I started cleaning the stator area on my recent purchase 2002 FE501E and there is just the start of rust on some...

is their suposed to be an oring on the stator cover.if so this could afect the alighnment on the stator should i add the washers to the back of the staor to take up the gap?

My 2003 FS 650 E has been at the top KTM dealer in south africa 4 months now. It went in for a service and they test rode it and gave it the thumbs up. 3 days later I sent it to KTM's sales dept to sell. Two weeks later the sales man said it's smoking, so I booked it in to the workshop. The...

I was lucky enough to have a stator screw back out and break off. Another backed out some, and the third held on. Needless to say, I need to get some more screws, among other things. Anyone know offhand the screw length? (98 fee501) I see in the parts manual 5x30, I'm assuming this is the...

:( :( not had much time to play on bike for a while ,last time out on trackday i snapped kickstart shaft so i got one and a new sprag clutch so just today i put them in and finished fitting enduro wheels yahoo time to play 2nd kick it fired and then cut out -----no spark ive got...

Hello, I need the stator (generator) for this model. Please point me if smn can help me. I can buy the new one or repaired. regards; JACK

Hi Folks I was the guy who asked for advise about the Fe 650 with no spark a couple of months ago. I recieved the bike from a fellow who sent it to a bike shop to have it looked at , because it had no spark. They told him it needed a new ignition switch which they ordered and installed. Again...