spring

Putting the clutch back together on my '04 FE450, and the pushrod didn't seem to want to sit flush. If i pushed it hard enough it would go in, and the master cylinder would gargle! So I removed the slave cylinder, and the piston popped out, with a small spring inserted into the back of it. I've...

Hi guys! Can anyone tell me how much does an auto decomp spirng cost on my 2004 Husaberg 650, and also where can I get one from?

Hello, I'm going to change cam chain, the new one that I buy is with the split-spring clip from Iwis. In manual from Iwis is written that closed end of spring clip must look in the way of rotation. I try to look for rotation direction through oil cap and looks like the cam chain travel goes...

Anyone noticed that their drive chain has rubbed the kickstand spring screw head off? I have a 2010 FX 450 and a friend has a 2010 FE 450 and we both have the problem. I tried to find some information about this but I didn't have any luck.

On a 2010 FE450 - I had my rear shock and front forks lowered 1.5 inches. I'm vertically challenged witrh a 30 inch inseam and in very tight technical terrain the stock bike was way too tall! The rear shock was re-valved when the lowering was done, but they asked me to try using the stock...

Hi All, My steel plates are blue and I need a new clutch pack. What is the purpose of the pre tension spring on the inboard side of the clutch pack? Can I remove this with the aftermarket clutch plates? What is the purpose of this? What is your quest? What is the air speed velocity of the...

can anyone tell me please on the new (012) closed cartridge fork is the spring length 450 or 485mm?...thanks

Ive just taken a set of springs out of an 2011 300 ktm for my friend who weighs 73kgs and the front end was like concrete, even with me riding it 83kgs it was to firm, awful to be precise, anyway he's purchased a set of .38nm springs. But I'm trying to calculate what the hell these springs are...

I have read on this forum and KTM talk that Husaberg underestimate the spring rates required to set up the bike correctly. If this is so, what rates should I be running for the fork and shock? 2012 TE 300 90 kg Rider, 102 kg in full gear I'm just a trail rider and don't want the full-on "race...

Ive treated myself to a 300 i traded my beloved 450 for an 11 Te 300 while I'm waiting for shoulder surgery, crazy yes i know........ lol my question is this, what are the standard spring rates for this bike????? cheers

I hope.. 05' 650.. 230 hours I was ridin along kinda easy, going through the gears when at about 5-6k revs it quit accelerating. Thought I was out of fuel at first, but ruled that out as it kept running. Running crappy with barely enough power to hold 40 mph. It turns over with the...

With a progressive spring, do you set sag the same as always? Sag is sag, right? Just got my suspension back and had to put in a lot of preload to get the race sag right; now bike sag is 1/2 inch. That means the spring is too soft. But, when setting sag, I'm in the soft part, so that makes...

Taking delivery of a new TE 300 soon. I'm around 87kg without gear, so around 100kg in full battledress. Been running 0.46 fronts and 72 rear in my 2008 KTM 300. I have available a 76 shock and a Race tech variable rate spring also for my weight range. Which shock spring would you recommend...

My forks have a top out spring. And when i extend (compress the top-out spring) I get a gap between the fork cap and compression spring. is that right ? Regards

Hi I'm new here so take it easy on me....... This is the first Berg I have owned and I'm not entirely sure of its history. Anyway its an FE400E 2002. I've taken off the rear brake pedal as the return spring wasn't returning the pedal, it was relying on the piston to return it. I have tried...

Hi guys. Can anyone tell me what strength rear spring I should have on my 2004 FE450? My current spring looks very tired and feels really too soft! When I'm riding it almost feels the bike is too small!! A new spring would look a bit nicer too! :) Ben PS, with all my gear on I weigh 14 stone...

hi lads just wondered if any body knows if newer fork springs from a ktm 2010 would fit 2002 style wp ktm forks cheers

Hi all, Can anybody give me the free length of the oil pressure relief spring. I think you once dabbled with this Bushie, any ideas. Oh it's an 04 550. Regards Sparks.

Im installing a new decomp valve lifter to my husaberg. All the manual decomp systems were disabled by ex owner, and im going to activate the manual one working from lever in handlebar. I think im going to leave the kickstart one disabled. Im having problems to find out how to install the...

I reading in my manual I have a 7.2 spring on the rear.My suspension guy said Imout on the fringe of needing a heavier spring,I weigh about 210 with gear on he set sag and also told me fork springs should be fine. The ? is do i get the 7.6 or go with an 8.0 like a lot have done here.I love the...