spring

Hello, I’m looking for some suggestions on fork spring rates for my 2005 FE550. I’m having my forks rebuilt before the start of season and want to get the springs sorted out too, I just haven’t been happy with how the bike is handling. I’m 170lbs naked and 195 with all my gear. The manual is...

I'm 315 and looking for a new rear spring. The Racetech calculator doesn't provide the rates I'm looking for with this bike. As an aside, any idea which KTM model shares this shock? I'm guessing there are more springs available for the KTM models.

Can someone confirm for me what is exactly the stock rear spring rate and type? I am finding a bit conflicting or inconclusive info. I bought my bike with racetech P20 in the back. As I found out that is progressive spring. Some sites sell progressive or straight rate springs (Slaven...

anyone seen a site I haven't seen for a couple of years. the site lists all the dimensions and weights of all the springs from all the manufacturers? cheers Taffy

Hi guys, i own a 06 fe450 and it became hard to start. Had to hold throttle whe. It did start as it would not idle. I brought the bike to my mechanic and he checked it. He said one exhaust valve spring on the right side has broken. Now, is that a common failure? Thanks

Hello I am looking for a new shock spring I came across some that say PDS P5 PDS p10 PDS p15 PDS p20 what does that mean? here is the link that I found that info at. http://www.racetech.com/ProductSearch/1/Husaberg/FE570/2011 Thanks -DaBergman

My apologies but I couldn't find definitive info from a quick search. Anyone have luck removed the valve springs on an 08 Fe450 without taking the head off? Is there a special tool for this? Looking to change out valve seals and have tried a conventional overhead valve spring tool but...

What is a good valve spring compressor for Husabergs? Has anyone used the Pit Posse tool? Would it work? Posse Valve Spring Compressor •Heavy-duty construction, economical priced •Comes with 16mm, 19mm, 23mm, 25mm, 30mm collars •Carrying case included •Max. opening...

So I've had trouble starting my 02 fs650 berg since I got it a few months ago. The kick start has basically snapped so electric start only at the minute. How ever it's got the r6 starter on it,it manages to turn the engine over once nd then just spins. Rang dave Clarke and they basically said...

So my sag isn't set correctly, hardly has any sag, standing sag is 10 mm, so i went top adjust my rear spring and it is too small so i cannot increase the sag, where do i go from here, will i need a new spring, how do i tell the size etc etc thanks :unsure:

anyone know off hand if the (2010) FE450 fork springs are interchangeable with the FX450 forks springs? thanks

me stock 2011 fs 570 looking for lighter one im 150 lbs im in nor-cal maybe ktm 250 or some **** will interchange pm me sac. area to be exact. if this is wrong fourm sorry

Hi all, I have been using the STD spring (88/250) on my SM which is rated for a rider fully equipped being 70-80kg, I am closer to 100kg fully equipped so have had the spring preloaded probably more than it should be to get my ride heights right. I have the opportunity to try a...

Hi there guys, I am looking at heavier springs in the front and rear of the bike. I have just noticed I have a rear straight rate spring from a 2004 berg sitting here which is a WP 81-99/260. This 2004 berg spring is 10mm longer than the KTMs or the new berg 2014 spring. There appears...

Does anyone know what the stock spring rates are for this bike? I see a few rates listed in the manual but I'm not sure which one is stock. The previous owner gave me the original springs but I'm not sure if they will work for me, I'm 190-195 lbs with gear. If this info is available online...

Hi guys I've just bought a 2004 fe450 and love it but only problem I have is I'm 18st and need a rear spring to match my weight...ktech have told me I need a 63-250-100 but the manual states that my spring should be 260mm so was just wondering if any of you guys could help? Regards Ronnie

I know these are sprung light from the factory. i read somewhere that they are even sprung lighter than the xc's and xc-w's. i went on to read that they are the same setup as the 2014 six days edition. either way- im 205 with NO gear on and the race tech spring calculator is suggesting .5 fork...

Says it all really. Anyone? PayPal? :)

Anyone know this for the US version? The shock spring size is easy to see, but what is the size of the stock fork springs? 3.8, 4.0, 4.2, 4.4, 4.6, or 4.8? Anyone by chance able to decipher corresponding rider weights?

Hi I have a 2011 te 250 with stock 69 spring but am after a 72 spring if anyone wants to do a swop?